Frage von aemtee:
Hello!
Of course, this issue in some areas already has been discussed, but could not find the answer very specific! Therefore it would be great if someone could help me. For the problem.
A hand-film project in AVID XPressPro worked, there QTReference created.
With Sorensen Squeeze DVD_LG to PAL mpeg2 further. This was then of me with IfoEdit converted into VOB's. As far as anything good, in principle, everything went fine. The DVD is widely recognized immediately without problems, Picture and sound are everything synchronously, only the picture on the DVD player is connected to the s.TV (2 months ago) shaking terribly. In the case of camera movements are very strong and has otherwise the whole project as a cause tremor. On the laptop (Mac PC as synonymous), is absolutely everything as it should be !!!!!
At what point of the process could be because the fault is, because it is definitely not a hardware fault, because I have several external DVD player with TV-tried the same problem.
Would be nice if someone could identify the problem. Thanks in advance!
Antwort von aemtee:
Hello!
Of course, this issue in some areas already has been discussed, but could not find the answer very specific! Therefore it would be great if someone could help me. For the problem.
A hand-film project in AVID XPressPro worked, there QTReference created.
With Sorensen Squeeze DVD_LG to PAL mpeg2 further. This was then of me with IfoEdit converted into VOB's. As far as anything good, in principle, everything went fine. The DVD is widely recognized immediately without problems, Picture and sound are everything synchronously, only the picture on the DVD player is connected to the s.TV (2 months ago) shaking terribly. In the case of camera movements are very strong and has otherwise the whole project as a cause tremor. On the laptop (Mac PC as synonymous), is absolutely everything as it should be !!!!!
At what point of the process could be because the fault is, because it is definitely not a hardware fault, because I have several external DVD player with TV-tried the same problem.
Would be nice if someone could identify the problem. Thanks in advance!
Antwort von AndyZZ:
I understand this work is not complicated: from about Avid QT to MPEG, then IfoEdit .... VOBs to ....???
That sounds to me s.wie: I climb through the rear left door into the car to torment me about the bank through the rear tailgate and climb back out onto the passenger again, and then on the center console on the driver's seat to slide. Would not it be easier to direct the driver to use?
Why not the same as mpeg2 and play off with a mannered authoring program to create a normal DVD can?
It's as simple as possible is usually synonymous as safe and compatible as possible.
Antwort von AndyZZ:
And why do you post in "Adobe Premiere Pro, if you use AVID?
And why is there still the same issue under "Miscellaneous"?
Antwort von aemtee:
Sorry for the duplication in the forums. Was a mistake!
Thanks for the advice, am going to address it again.
Antwort von thewhitesmoke:
at times really to help you: the sounds as halbbildfolge would be swapped. on the pc you will see the error is not because there are always two fields into a progressive image to be mixed. on the TV set, the fields on the other hand, actually depicted. (ask: why there's no modi for pc, the half as the tv show so the pc monitor to monitor to make?) that makes then as a principal in the building tremble noticeable. So: halbbildfolge repent or deinterlace the whole, it should be gone.
Antwort von Markus:
... only the picture on the DVD player is connected to the s.TV [...] terrible shaking. In the case of camera movements are very strong and has otherwise the whole project as a cause tremor. Seems to be swapped for a Halbbildfolge to. Check again all the settings of the images on the project to DVD. The Halbbildfolge must be the same everywhere.
On the laptop (Mac PC as synonymous), is absolutely everything as it should be !!!!! Through a deinterlacing, which is a good player software performs interlace video, it disappears every second half - and thus the fault synonymous.
* edit *
Double posting with answers just seen / merged ... * * grummel
