Frage von Ursulinchen:Hello Together!
I need help. Can someone explain to me how I may be the mini-DVD get our camera to the computer. But please, the statement would have to be so. then a layman understands it. I can start with the whole English words nothing. You'd have to explain it to me right deppensicher.
Do i need anything besides the camera, a connection to the computer and a burner?
Do I need to install the camera on the compiler synonymous? It was in fact no software there.
Please help. I thought I can play the small DVD synonymous in compiler.
Thank you ever
Ursulinchen
Antwort von torti3005:
Panasonic (p) is unfortunately not in a position
Antwort von torti3005:
I have synonymous, the Panasonic VDR-D300 and unfortunately am not satisfied!
At the Page 56 of the manual which is the software, DVD Movie Album,
is unable to transmit the 16:9 movies on DVD. It only works if the film in 4:3 format stores on DVD, unfortunately The film then very distorted and unusable.
For me this is an unacceptable disadvantage of the Panasonic will be sent in silence.
Panasonic says: "The subsequent editing of the video scenes at the VDR-D300 is easily possible in the camcorder."
So, once again, editing is not only on the camcorder on the computer!! If you have transferred the movie once on the hard drive, can not delete NEVER more scenes. In other words, the software is unusable for editing the films. For me, an unbelievable disadvantage.
The hard drive on the copied footage is stored in an
unknown format "Vr_movie.vro" and I have so far (as of 12.2006) not yet found any software with which you can edit this film format.
Please respond s.Solarmax @ web.de
Antwort von Eva Maier:
That you're not satisfied with your camera, which is a pity
the DVD Movie Album, however, only the software to you in the editing of the video recorder mode (VRO) files recorded on DVD-RAM.
Otherwise gibts this software is not commercially practical.
And I have mitgekriegt here in the forum, it is also not easy to edit already compressed material ..
/ Eva Maier
Antwort von Jan:
Have you used the DVD Ram or just the DVD - RW?
VG
Jan
Antwort von gast6:
hello together!
I think I have a similar problem as you. have the vdr d100 to get christmas.
I grad this test to see if I should work with or with vro vob files.
Cut to gehts niergendwo my opinion, except for s.camcorder vro files directly, and then you can burn only on the mini dvd nero, but I've not yet tested synonymous.
I work with dvd-rw .......
vob with the benefit of the one is to convert files by simply renaming them to *. mpg can.
Editing then only when he takes the first scene that we have always done ......
somehow ill!
perhaps there still more contributions on the theme!
thank you and greet
a bloody beginner
Antwort von Jan:
Edit necessarily to PC video mode to cut some programs have literally one VRO problem.
It should, however, a well-known news and video program will be bought with the MPEG 2 files and more importantly with the Dolby Digital / AC 3 sound of the DVD camcorder will cope.
Magix 2007, Ulead VideoStudio 10 or Pinnacle Studio 10 pros, etc. would go, but be careful with 2005-spec, and even older software.
Some users convert the files synonymous with the Power DVD program or with other MPEG converters and then have synonymous less stress.
But actually, the DVD system is not to edit there - was supposed to tell anyone who sells to the customer ...
VG
Jan
Antwort von gast6:
Hi Jan!
Well your words sound good, you know I see you out.
1) VR format VRO files can be created which has died for me, is totally unnecessary, wirklcih wonder why it exists and why it should be designed to reprocess ...........
1) video format created VOB files - so I will in future work.
I have now increased in the last hours of the following system: ProjektX split with the whole thing.
then cut with cutter maran grossly and muxx back together.
I have an mpg file.
this I can then just burn dvd on a normal or cut then editing with magix again (, effects ,...)
is that correct? It may be that if you burn the mpg file, then no one has a ton?
have 24 hours before doing the first time with it and I had an absolute layman, ask for infos if this is so ok.
I'll soon be buying namely the magix, I hope this is not unnötigt. (Have a vdr-d100 get paid)
Many thanks and greetings from vienna
Antwort von gast6:
vindictive:
Of the cutter maran created mpg file can not burn it. If I file them in nero dvd into my insert, I have the dvd then only the image without a ton ?!?!?
is there anything here for alternatives?
I get a cut vob file with the prjektx became synonymous paste directly into a program?
bsp for magix?
dankeschön
Antwort von Andreas_Kiel:
Hi,
Pinnacle 9 Studio can import VOB of DVD (even) pretty quick, and is currently en masse at a major Internet "auction house" has very little for Money.
Andreas
Antwort von gast6:
Thanks for the info!
I'll just reinschauen times!
synonymous is interesting, if I mpeg2 and avi to vob file conversion, and the vob file then burn with nero express, once again I've only images and no ton!!
If I can cut the pinnacle min vob file, then that would be quite practical and the Hiese that the dvd camcorder would be quite handy eh?
I can almost feel the ned of the works so easily!
good night!
Antwort von Jan:
The video recording mode (VRO) need people who do not want s.PC rework, but in the Camera: create playlists, delete individual scenes or want to cut scenes.
The Tonproblem hangs together with the recorded sound of Dolby DVD camcorder, depending on the program is it clear or not.
Programs which may have already mentioned it.
This is a thread against wiedermal DVD camcorder .....
MiniDV the "schnittfreundliche" system.
VG
Jan
Antwort von gast6:
hello jan!
Thanks for the answer, you've already read that one of the few that are the subject completely around the dvd camcorders have seen through ....... but still I believe that the manufacturers of the products were safe to have created a system that already Nobody durschschaut!
:-)
The synonymous with the vro makes sense as you wrote, just what I do not understand yet, that's the format for the post-process and therefore there is not actually in the dvd player is playable s.fernseher that benefits me as a vro file the I can not play s.camcorder reprocess and then?? (without pc)
I mean with one 0815 dvd player, at least not in my vro go!
But no preference, which I need to not be happy anyway.
With regard to the sound thanks: to the dolby sound, I had not thought of.
Conclusion: if I have a current version of magix pinnacle, or hole, then they could handle programs with dolby ton?
or did you mean another program?
Of those mentioned, I can actually synonymous programs directly off the dvd or burn again because I need the nero expres?
Thank you for your answer, a bloody beginner's happy.
And the thread that a "counter" dvd camcorder is not, I'd say I'd say this is a normal thread because what more positive than this one finds little in the www!
:-)
Antwort von gast6:
Addendum:
hello afterwards, ncoh've forgotten something.
You can import to the editing programs (and magix pinnacle) actually really like vob, cut and burn it?
And I can save the whole with projectx??
or is it preferable to convert the whole as mpeg2?
as you would address?
Thank you!
Antwort von Markus:
But actually, the DVD system is not to edit there - was supposed to tell anyone who sells to the customer ... You're doing so as synonymous. But what experiences you gather there temporarily?
I remember s.Deine description of a disgruntled customer who thought you did not want to sell him the latest and his (inadequate) opinion, the best technologies. Well, every customer as he thinks ... ;-)
Antwort von Andreas_Kiel:
Addendum:
hello afterwards, ncoh've forgotten something.
You can import to the editing programs (and magix pinnacle) actually really like vob, cut and burn it?
And I can save the whole with projectx??
or is it preferable to convert the whole as mpeg2?
as you would address?
Thank you! yes, relatively simple in
Pinnacle Studio 9 Pros, I describe the exact time:
- Creating a New Project
- Import File | DVD titles
- Select the VIDEO_TS folder in the dialogue on the DVD,
- To import the title synonymous (select more than one possible),
- Determine the destination folder,
- Click Import,
- Value in the target folder after a while (time-quarters of an hour for a 90-minute tracks) admire a MPG.
- Studio can with the automatic scene detection "by Image Content", the split in the same clip. Timecode is of course unacceptable.
- Clips are now in the Project, with cutting off you go ...
Besten Gruß
Andreas
Antwort von Jan:
Thanks, I will be honest?
I've never longer with a DVD camera filmed, finalize simply too stressful especially about - no, yes once again ....
As a seller, I myself have a duty at least to some of the sold equipment with auszukennen, stop've read instructions and more importantly DVD and tested in the models.
Yes you are right in VRO mode, which can indeed be stressful to players correctly, people who only want to edit in the camera need to stop him, eg because you can stop in video mode does not delete individual scenes - just everything.
Thank God, some customers have been informed about the love DVD camcorders, like their brief recording time, do not take all the DL and 60 min (40 min best quality) must be turning halt. There are still plenty of people who think DVD yes that's digital and more ....... The advertising Saudumme my chain probably makes every customer mad.
If, however a Panasonic DVD player / recorder and has a VDR model as eg the 300 buys a use of the RAM is not as stressful as Canon & Sonywith - RW. Yes RAM capable PC should be better, or even his drive.
RAM can now watch without finalize halt in the VDR 250 / 300 can be programmed with the included editing process when using a RAM & DVD-RW (VR mode), the film slightly.
With DVD camcorder material and editing programs I have not so much s.Hut. Magix times I had tested to import the VOB file was better but the film only on hard drive to attract and out of there too
. Import But I always have to emphasize the frequent crashes are often synonymous s.einem weaker Calculator, MPEG files need to stop a lot of computing. I thought the current Magix 2007, the works.
Andi has given you so Pinnacle tip, you see, it is similar.
VG
Jan
Antwort von gast6:
@ Andy:
Thanks for the tip, I'll just try it!
@ Jan:
Thanks for your response. Regarding the DVD's I give you right to finalize that is already boring and because the RAM's have an advantage.
But in my VDR D100 I can to Bsp RAM,-RW and-R use.
Until now, I really only use the-R-RW there anyway in question comes with the RAM and I have the disadvantage that I can not choose between VOB and VRO files, but can produce only VRO files. Here are just a VR format and not a video format is possible.
This disadvantage is for me irrgendwie larger than the benefit of finalizing.
vg and beautiful day
Antwort von Jan:
Yes DVD RAM is always VR mode.
With my Panasonic DVD recorder, I am certainly very happy, synonymous with the Rams used. Some, however, were unfortunately not too long by - Naja.
VG
Jan
Antwort von kleines:
Good day,
da me finalizing very disturbing for several reasons, take out the VRO mode.
DVD then restart the PC, Ulead Studio 9 and the picks everything at once from the video TS.
Although the material could now edit in Ulead, but often need up to 8 effects and sound tracks for export, therefore, U-Lead as an MPEG2 file that I can then edit in einwandfei Magix 2007 +.
Regards
Herbert