Frage von Räuber:
Moin forum, I need some help yours. I have a project created in Magix Pro X 1.5 and this then burned as DVD PAL 16:9. DVD s.Calculator controlled, until then go to the greens.
DVD is inserted in the DVD player to display on the television is faulty, it lacks so about 10 15% of the image, one has the impression that it was I zoomed the picture: Now it is confusing. Also switch between 16:9, 14:9, Wide, 4:3 and the auto function does not improve. Have the DVD burned again, this time the setting in the Magix "TV-bleed", but came here to the same error.
I stand'm clueless, which causes the whole thing, or what I did wrong. I ask for your time tips.
Thanks and regards,
Stefan
Antwort von tommyb:
Did you create your DVD in the "Under Scan" respected?
No?
Of these, however, there is. Be eaten up about 10% of television, because old tube TV to make the ever so synonymous (technical reason). Some modern flat screens, however, have settings like "1:1 Pixel" - so you can switch off the underscan.
You will not get around it and contain writings move closer to the center. Alternatively, you tinker a black border around your video.
Antwort von thos-berlin:
This is so. From the antiquity of the television technology is this behavior and take preferably tube TV. Search times for the words underscan / overscan.
Since synonymous sist the reason why will be shown with some editing software and camera viewfinders rectangles in the picture. Thus, the areas are identified, which are always visible and popular as those that are possible for a secure the title.
How strong the effect occurs in flat panel displays, I have not tried, but showing the PC - as opposed to television - everything from the Picture.
Antwort von Räuber:
Thank you first, I thought that with the "TV-trim" feature the theme Over-/Underscan would be done. Does anyone by chance have any idea how to take into account in the Magix underscan is - or do I really live with the outcome, or how "threatened" all rework?
Or is it can handle other authoring software with this problem?
Thanks and regards,
Stefan
Antwort von tommyb:
You can work around with this problem, because the problem is sitting in Television. Care must of early s.darauf.
I told you above two solutions - can only be amended in the.
Antwort von Räuber:
All right and thank you, I will once the Project decrease to about 10% ("black border") and then output it again.
Vile greetings of the Baltic Sea, Stefan
Antwort von tommyb:
No worries - by the underscan / overscan, each time through;)
Antwort von thos-berlin:
The "shrinking" in the sense of using a zoom blur effect brings.
The non-visible area should be taken into account better the recording. If you experience problems s.den physical edges, at most, a "black mourning border" to be wrapped.
Antwort von Räuber:
Oh yes, just once more ran to's Project, but - see signature - I'm once again a little smarter.
Thank you for the help!
Greetings of the Baltic Sea,
Stefan
