Frage von AlexS3800:
Hello,
I have looked in their heads, I finally get a new camcorder to purchase.
For test reports, etc. I have the Pana. NV-GS300 s.meisten eye.
Since I became quite the topic of your camcorder and have little idea synonymous nothing right about this place, now some questions. You might forgive me if these issues s.anderer agency already discussed.
I'm looking for a camcorder, especially for outdoor scenes - especially in the field of aircraft pictures - but synonymous for everyday use, so celebrations, holidays, etc.
I want a good picture and good sound.
The picture is indeed in the GS300 to be fairly decent. How does it but with the sound off?
In many videos on the net often, one hears a "overdriving" the sound when the filmed object is a bit noisy. How does the internal Micro s.der GS300 so clear, or is this "overdriving" generally only s.der post and / or Compression (MPEG / WMV format)
Is a fairly good sound recording with appropriate heights and depths, above all (bass) with the installation of micro-end, or do I need an external Micro to fall back, possibly due to wind synonymous sensitivity? Can anyone make recommendations for external, but affordable Micros give?
Theme Zoom, generally.
Please note that the question of myself a bit stupid and confused to fail here for me but any logic, if I try my own question to answer;) and in the net I think, unfortunately, nothing: (
I have a Pana. FZ20 digicam with 12x optical zoom and 5Mpixel.
The GS300 offered so synonymous with 10x Leica Optical Zoom, but only 800Kpixel.
How does the apparent object size on the Picture, if you two cams with a Picture (2560x1920) and video (resolution?) With the 10x zoom on equal terms from the same object absorbs.
Therefore, if the scanned object on the Picture of the FZ20 formatfüllend out, is the much smaller screen of a video also fully completed, or is the object in the video did not quite see, but as a whole would have approximately the same size, as in FS20 Still image?
In other words:
If I 5Mpixel with the cam at 10x must go to the object formatfüllend to 2560x1920 to get rich then at a 768x576 (?) Video resolution about 3-4x zoom for formatfüllende representation?
Also: Same Zoom = equal representation regardless of the details of the resolution, with only the smaller image resolution of less scanned object is to be seen?
I am extremely grateful for any help.
Greeting
Alex
Antwort von Videostudio:
The focus of virtually all digicams and camcorders are small lenses and level converted and although no preference which Resolutionder sensor itself, only the image resolution can hold very differ
Antwort von Bernd E.:
the question myself a bit confused before, fails here with me but any logic This is synonymous with your question very well over ;-) So: Do not zoom as the 3 - or 10-fold to decide how big something is mapped, but the actual focal for the better comparison is to the 35mm small format is converted. Thus, a 3-fold zoom lens of eg 200 - 600mm Focal your motive in more than a reflection of 10-fold zoom of 35 - 350mm.
Since we are talking of optical zoom, focal length in which to change the lenses are moved, you need synonymous to the pixels not be a cause: The Lumix synonymous as the GS300 use your example in their respective number of pixels - completely independent of the s. Zoom focal set.
Gruß Bernd E.
Antwort von Jan:
But beware digital try some company with extra optical zoom (Pana) their models more zoom at the same quality vorzugaugeln. A current FZ 50 (Successor After FZ 20) synonymous 12x optical zoom is at 21x then feasible "optical" zoom only with 3 million pixels.
Just like at Kodak zb (Z 710), where to set high ISO number, the camera just only half Resolutionzur available, few know what else.
For sound, GS 280 / 300 have good sound recording, if the manual Tonaussteuerung is desired to disturbances in the red area to be avoided, it must be purchased GS 500.
VG
Jan
