Frage von p6:
dear all,
'm new here in this forum.
because: (
I try my material of Final Cut Express 1.0.1. back to DV tape (camera-HDR-HC1E) to play (with FireWire cable via HDV / DV);
(band not be protected from capture tape does well; FCE recognizes the camera - what is wrong?)
I should perhaps in the final cut espress somehow activate the device-control, perhaps not start recording car?
(at rec directly to camera I take on as normal, but not by computer)
FCE in: i In to mark out, say File> print to video and my recorder is not responding.
the camera has to dv in, because I have been of as iMovie on tape was able to play on.
could someone please help me?
Best thanks in advance
tricia
Antwort von immanuelkant:
I do not know if you like the following problem: The Sony cameras have always Wiedergabe-/Player-Modus to allow DV - / HDV material can play.
Antwort von p6:
thank you for the first experimental support!
with play / edit mode it does not: if I get my material from iMovie export (as a test have tried again), then after a few seconds the message: Connection to the computer aborted; of FCE's no message, just not responding camcorder - indicates the material already in the LCD screen, but is not on and this red dot will not appear.
is perhaps the problem generally s.der connection to computer (or s.lösen subject of cables, order, etc.) are?
1) computer speed and then
1) final cut, then turn on camera and only then with the i.LINK cable connected? (I.LINK kaben first s.Computer, then connect s.Gerät)
or 2) connect camcorder with the i.LINK, then final cut, then turn on camera?
what could it be?
sorry thank you
tricia
Antwort von dash snow:
Maybe not "fair standard" HDV - or SD material? For HDV must 1.440x1.080 / 50i are elected for SD 720x576 / 50i. Other format the camera may not recognize.
Antwort von p6:
Thank you
dv than actually recorded (I can so when SonyHDR-HC1E the camera settings for recording between HDV and DV to choose, it was dv;
dv PAL, all well-behaved;
forgot my recorded material in FCE, share rausgeschnitten and wants back on the band - the tape is not synonymous HDV, dv-camera shows in i.LINK
but is not responding
Antwort von Axel:
In Final Cut Pro is that the "output to tape" synonymous with correct detection equipment and camera to VCR / VTR (mW applies not only for Sony) as well as DV-IN kameraseits to "HDV" (checked?)
then stopped, when an external video output (not via firewire),
or the display of all images on DigitalCinemDesktopPreview default (FC preferences, or and / or> Finder> display). The times you could be synonymous check.
Antwort von p6:
oh what a blessing! I've got it now !!!!!
it was s.der camera, not s.programm FCX:
I have cameras in the recording control to start recording "button should be!
it works now,
thank you! and sorry for the trouble in the rest of the forum
tricia
So once again concluded:
if at HDR HC1E no output to the work-tape
P-menu> menu> Edit & Play> Rec. Ctrl> REC. START and OK confirmation s.Computer!
