Frage von Datavideo:
Wanted you here and just my bad experiences with the company Datavideo portray.
I am in possession of DAC2, which I several years ago, bought new times.
So far, I have the A / D converter with only the S-video input is used and everything worked fine.
Now I wanted to analog recording on the YUV Inputs and digitizers had to realize that because something is not right, ie the colors are totally distorted (braunstichig, dark).
Of course, no guarantee anymore.
A request from Germany representation of video data revealed that it would no longer exist at the exchange boards. I said, I will not exchange board, because only one function is not working properly and the device also made for only one board exists.
I should be the device to send a free review. You can then locate the error messtechnsich.
Now I got the answer, you have the device on any cold solder joints checked, everything OK There must be a defective component, which unfortunately could not locate mestechnisch ....
A repair would therefore not possible. You gave me in the same breath, but a friendly one-time offer on the purchase of a new, updated equipment for 700, - Euro ...!!!
Is it the Height, or what? What a workshop is that which can not find (or will), where the fault lies?
So I wrote s.Datavideo in the NL and begged them, since you are no longer had parts for a circuit diagram, so I in a local shop after the error can be examined. Answer: Only autoriesierte workshops could repair their equipment, so there is a circuit diagram synonymous for me.
What a sh ... Shop is that? I'm stinksauer! Since I buy a few years, expensive device which is now perhaps only a ridiculous IC or capacitor is broken, and you want more than ever does not help, on the contrary, processing ... the customer still synonymous to him in the underprivileged, the device to "verify" and then only threadbare a new unit to try to sell ...
Your thoughts about this I would be very interested.
Oh yes, maybe someone has a circuit diagram for a DAC2?
Antwort von Datavideo:
Not interested here, or am I in the wrong category ...?
Antwort von siematic:
Accidently an RGB-YUV signal at the time connected or reversed?
Otherwise, there are different levels YUV (YUV Betacam or SMPTE).
Antwort von Datavideo:
Of course I have everything checked.
No, it is a defect.
Antwort von Zizi:
Hello,
Thank you for your entry! I "liebäugle" synonymous with a Dac2 ....
Good to know.
So a similar "stupid" mistake I s.meinem SonyDHR1000;
there is, to restore the analog material, the sound is no longer (clangy noise). About I-Link is everything OK.Miscellaneous demands in the forums were
only Sonydas device can repair (wants) and is therefore not synonymous schematics there! toll.Den recorder I perhaps just 50 hours in use. "The stands are broken." Echt blöd.Da me anyway n I want to buy converter, do I fix the error of course not, DV-in is yes.
@ DAC2: It seems to me as someone with "looking for cold solder joints" short times the lid abgehabt and the dust rausgeblasen, done.
A Dac2 was recently in E.. Y, synonymous with an error in YUV input, if it is not your device, there are such errors appear to be more .... I have the offer still stored somewhere, so you can times s . forwared the vendor if you want, maybe even has a tip.
Sorry, would you like a "useful" tip type!
Greeting
Antwort von hannes:
> Miscellaneous requests in the forums were only Sonydas device can repair ...
I think that a rumor.
Question times in dpm after essen.de.
They have so far all of my repairs.
Antwort von Zizi:
Hello,
Thanks for the tip, I could ask some day! (well, I know some synonymous "non-Sony-only professional workshops" the synonymous plans and would get it repaired, but I think there are times then loose 400 euros away ....
Thank you! Gruß, Christian
