Frage von chrisi907:
Hello,
s.die entrenched camcorder hätt engineers among you, I look at the following question:
I'm for s.and of the FX7 is very confident. Only movies I mostly progressive. Since the V1 for me, offers little advantage except for the 25p recording, I like to know whether the firmware of the V1 to the much cheaper FX7 would work, whether it synonymous to 25p recording would be possible and where you could do that.
I had read Wolfgang's HDV thread that he had such an interface for reading and writing of the Sony and the firmware has with the HC1 - A1 wanted to make, it only failed because it did not A1 firmware could get.
It is the progressive reading of the chips and the high level of sharpness would for the FX7 yes predestine progressive productions.
Yours sincerely,
Euer Christian
Antwort von Wundert sich sehr:
Na Sure, you can have a Beetle engine in a BMW synonymous install ...
Antwort von chrisi907:
That was already a serious question, because the two cameras are ultimately identical.
PS: Sorry, your argument was, of course, justified. I had incorrectly. I said of course the V1 firmware into the FX7.
Antwort von Markus:
What makes the FX7 hardware of the V1? - Obviously there are connections in XLR audio format. Anything else?
How little the "professional" camcorder of its Consumer sisters are different, see eg synonymous s.den (undocumented) DVCAM Wiedergabefähigekeiten those consumer models, the synonymous DVCAM offshoots have.
I do not know, but would assume that it may be possible for the spirit of a V1 in the FX7 to be stuck. But who should you guarantee that it really works? The Ghostbusters are already long in retirement ... ;-)
Antwort von PowerMac:
There are three possibilities:
1. You inspirierst in any of the big, daring DV fora freaky Ami, the guarantee for its own sake of the experiment is completely cold and makes him the priority. He will reinsteigern and as long as the trial & error until it somehow goes. With the pull of American thread (120 pages) with lots of make and make Scheiss work for you and find the synonymous still "awesome".
2. You try it yourself Due to the lack of e-technology fails you and the camera but is ass. Unfortunately this is the warranty on it went.
3. You bestichst a high-level Sony support person who knows the technical documentation and try it together with WoWu and Juan P. Pertierra of Reel Stream.
Antwort von smooth-appeal:
There are three possibilities:
1. You inspirierst in any of the big, daring DV fora freaky Ami, the guarantee for its own sake of the experiment is completely cold and makes him the priority. He will reinsteigern and as long as the trial & error until it somehow goes. With the pull of American thread (120 pages) with lots of make and make Scheiss work for you and find the synonymous still "awesome".
To thee is a gifted comedian lost. Sometimes, although clumsy and often inappropriate, but so beautifully sarcastic, cynical, perhaps even kynisch I laughed before desöfteren Screen sit and wait for more.
Antwort von chrisi907:
3. You bestichst a high-level Sony support person who knows the technical documentation and try it together with WoWu and Juan P. Pertierra of Reel Stream. Ok, then I'll pick my Sony V-man contact and with him a secret meeting represent ...
No, seriously: From you have no one of his firmware exchange between its HC1 - A1, FX1 - Z1 and FX7 - V1 heard?
Antwort von ruessel:
In the HC1 to the A1, it is well managed:
http://www.xitek.com/forum/printthread.php?threadid=431886
Antwort von xandix:
In the HC1 to the A1, it is well managed:
http://www.xitek.com/forum/printthread.php?threadid=431886 Is there a (English) translation of this page?
Gruss
Antwort von ruessel:
Why? Above all, however, stands:
Movy Mode:
Page0A FF = A9
Black stretch:
Page0A FF = B7
AWB sensitive:
Page0A FF = B5
Then set Page0A FF = 01 or 00th for Language
Who so nothing can begin, which anyway should steer clear of it.
Antwort von xandix:
Why? Above all, however, stands:
Movy Mode:
Page0A FF = A9
Black stretch:
Page0A FF = B7
AWB sensitive:
Page0A FF = B5
Then set Page0A FF = 01 or 00th for Language
Who so nothing can begin, which anyway should steer clear of it. Where clear.
But there is so much around to be observed.
How is the software to operate (under DOS)?
What kind of adapter you need (parallel port on LANC)?
What is still to be observed (Einschaltreihenfolge, software download, etc.)
Gruss
Antwort von chrisi907:
Jo, I have the Page in the course of my research synonymous found. Is there such a setting table synonymous for the FX7?
Antwort von HexHacker:
The F7-firmware are fourteen byte sequence to change. Under "SET MODEL" there are five episodes, all of C0 to 0A to set. The remaining nine are spread "SET SUB" (?, 0F to 1C), "SET OBJ (probably Lens, of 2F to 4F) and" STORE SET "(there seven effects of C0 at 0A). The whole thing only works with the DOS-based tool. Then, the camera of course, the Memory Stick is not more attracted to, but it's become even a V1. You can then easily be synonymous DVCAM.
Ùeöv„PageCv„P<[ž–Ef/Page1Cv„P
Note!
