Frage von Chessus:
Hi folks,
I have in the format on my LT dubbed cut and burned to DVD. I am with the quality did not zurfrieden. It was synonymous not better than I s.Television installations.
What can I do to improve quality. I wonder why I am such a digital video camera that, if the recordings that my father 15 years ago has done better despite the fact that the tech at the time Nick was not yet ready.
I have a Canaon MV 690i with 800,000 pixels.
Is it true that this camera records in PAL format? What is actually PAL. Can I change the resolution irgendiwe not improve?
Greetings Tobias
Antwort von Stefan:
What can I do to improve quality. The Umwandelprogramm of DV-AVI to DVD, or better a better program take.
It is possible 60 minutes DV-AVI as a DVD to bring that to the ignorant viewer sees no difference if it is the DVD with DV material compares.
Good luck
The thick Stefan
Antwort von Chessus:
Do not plan what you mean?
Antwort von Stefan:
But I have a plan of what I mean.
Good luck
The thick Stefan
Antwort von Tobias der Newbie:
I said I do not have a plan! This is en beginners forum if you want to help me then you have it so PLEASE make them what I did.
CU
Antwort von Markus (unangemeldet):
This is en Beginners Forum ... This is not completely true. This exchange is synonymous professionals, the five funds to invest in video cameras. ;-)
Since I do not have enough information from your contributions can be read out to help me isolate the cause, can I give you first a few general articles link. If you've read all, restricts the troubleshooting may be a:
"
FireWire FAQ">camcorder / recorder s.PC connect, capture and edit images
"
Video recordings s.Computermonitor not look good "
quality of a DVD-Video _________________
Liebe Grüße
Mark :-)
Antwort von Stefan:
How do you go?
You have now three long messages are not written, and exactly what you mainly do so. How should I as a precise tip on how you can make it better?
I can only write: Others create it easily, DV to DVD decency to bring. And if it does not work with you, it depends s.deiner handling either the program or s.dem program or video s.einem too long.
Good luck
The thick Stefan
Antwort von Eva Maier:
It's always a problem to explain to people that this is not Hellseh-off Competition.
But I do believe that various programs the default setting for the movie Berz mice. Intzernetvideos is.
/ E
Antwort von Tobias der Newbie:
Hi folks,
Find ich geil which many people
I would like to give all the info. Thanks for the links that I have already brought to mind.
The film is 20 minutes long. When importing (capturing) I have the DV-AVI format is selected, before the burn to DVD too ... glaub ich halt.
Again, if I use a Canon MV 690 of that, which is characterized for a format and can I change the format (picture) change?
I've heard it's called the PAL format is it?
Antwort von Bernd E.:
When importing (capturing) I have the DV-AVI format chosen Ever thought correctly.
before the burn to the DVD also To create a DVD-standard to get you the movie before burning into the MPEG2 format to convert.
Canon MV 690 of ... what is the format for a As a PAL camcorder and it is in DV PAL format.
can I change the format (picture) change? No, this is a feature that only some much more expensive camcorder dominate.
is called the PAL format is it? Right.
Gruß Bernd E.
Antwort von Tobias der Newbie:
Thank you.
Be the MPEG format with the oysters.
Basically the equation true: more space on the play = better quality
I refer to the conversion if I had been captured and cut up the film prepared. Or am I getting the best results when I use the format as suggested above it.
Thanks for your support.
Antwort von Tobias der Newbie:
This is en Beginners Forum ...
This is not completely true. This exchange is synonymous professionals, the five funds to invest in video cameras. ;-)
Ahso because I thought up is .... Beginner Questions
Since I do not have enough information from your contributions can be read out to help me isolate the cause, can I give you first a few general articles link. If you've read all, restricts the troubleshooting may be a:
" FireWire FAQ">camcorder / recorder s.PC connect, capture and edit images
" Video recordings s.Computermonitor not look good
" quality of a DVD-Video Thank you I have already read. I would not believe it I just try to go forward by asking questions. I read your posts synonymous, but some makes me stop still not entirely successful. All the more beautiful it is when one of such great professionals will be supported. I am totally Beginners as well as filming at the computer. Have only recently my first personal computer purchased. That is a lot to learn.
Liebe Grüsse
Antwort von Markus:
I refer to the conversion if I had been captured and cut up the film prepared. Or am I getting the best results when I use the format as suggested above it. The workflow is always the same from:
[list] 1 Recording Camcorder
2. Capturing as DV-AVI
3. Editing in a DV Project
4. Possibly. Export the timeline as a DV-AVI
5. Possibly. Off to DV tape
6. Compress as MPEG2
7. Burn DVD-Video [/ list: u: 06f452daef] Note: The compression is always a very s.Ende place when everything ready cut, titled and is composed of video and on DVD
as is.
Antwort von king_porno:
And as I compress to MPEG2?
Is there a conversion program?
When I put the movie on hard drive or DVD store, is the highest format that I can set PAL ...
Windows Movie Maker. If the check or s.Programm I do not?
Tobias
Antwort von Tobias der Newbie:
Please help
Antwort von Eva Maier:
Hi
PAL is almost OK
The film should preferably not lämger than 60 minutes, then as setting DVD 720x576 - Data 6 Mb / s - if the Einstellumgen when you just read is not known to me of course but I think that it was comparable dfa there.
/ E
