Frage von Dr.Müve:
For an older Sony Mini DV Cam, it was possible the DV port within a short period of umzuprogrammieren so that these synonymous as input, and not only as an output could be used. Is similar to the HDMI interface on the HV 20 possible?
Antwort von Quadruplex:
HDMI is the consumer market s.für devices provided a pure play port. Consequently, no.
Antwort von beiti:
One must know that the DV-input (and even before the analog input of Video8 camcorders) Manufacturer of the pages in almost all camcorders was better. Only the strange European policies Inch forced to this option to disable artificially.
However, it was synonymous subsequent unlocking of DV inputs only a temporary pleasure. From about 2002/2003 Manufacturer secured better access, so that it later built camcorder gave no more activation. To that extent would not be free with a simple way to switch, even if the same camcorder outside Europe would have a corresponding option.
The view of the U.S. market shows very quickly, which in theory goes: If there were in the U.S. camcorder with HDMI input, there is at least the theoretical chance of clearing in the euro models.
But I think that an HDMI input to be unattractive. One might almost selbergefilmtes only to restore the material, and you can just as well s.Computer process. The copying of Blu-rays, etc.. because the copy would not work; synonymous various communicable via HDMI Resolutions and frame rates, each of which only a few camcorder dominated would be an obstacle.
Around the HV20 should all signals to HDV format - ie a big detour. When copying of HDV HDV after everything needed eg only FullHD converted by DHM0 transfer in the host and then back on Camcorders 1440x1080 reduced and new compressed. What would be good? Moreover, since one via Firewire HDV can be transmitted without loss?
