Frage von EdwinOtto:
Hello, can I book a mixer AV signal (several microphones) a-locks --
Would like an organ / choir concert record-I had the opportunity synonymous sound separately aufzuzeichen .. but do not know how I Picture and Sound can synchronize --
mfG
Jonny
Antwort von DWUA:
Welcome back!
Have you ever tried this?
Schade. ;)
Before now Quadruplex angedüst comes to us whether this
pragmatic response abzuklatschen as it earlier with
Powermac has tried prefer the following queries:
TECHNOLOGY s.die question: What exactly is it available?
Question s.die DIRECTOR: What kind of pictures should be made?
Location? Church? Choir? Architecture? Hands and feet of the
Organists? ... and Other and ...
Also this should be preceded by a "script" type!
Directing and technology, the 2 unequal brothers, only make a whole.
If then what in the box (at least 2 boxes) is
you can see further.
Information can be found in this forum is already enough.
Learn times, more detailed questions.
Otherwise you need not be surprised when no one
Reply mag.
Antwort von K.Bean:
Well, it was his next question now is not.
In his view, actually made very easy.
Yes it works, you can sum you with several microphones aufnimmst from the mixer into the camera next to send.
When the position of the arrangement of microphones and the volume ratio of each other, you should, however, but something like this to understand.
The sum signal is then send you, as I said into the camera and if you want on a further output s.mixer in an MP3 player for another soundtrack to have. (Just for security, if you will)
Good, of course, would be a second camera, with you the various close-ups out of them.
With a camera because you are very limited.
A second cam can always convenient for a day out.
Have fun and LG
Groover
Antwort von K.Bean:
Been possible by manual Tonregelung camera is set to low, and then the microphone input mixer connected. to absorb external security synonymous.
Synchronization: In nonlinear editing, the two soundtracks übereinenderlegen, waveform show visually first and then roughly align. Kameratn then on the left and right external aufnahmeton on channel, and as long as move, until it fits perfectly, so nurnoch a signal is heard, and not 2 different.
The best try, so mixing s.kamera times, play with levels, until it fits well.
Antwort von Meggs:
I've already done, from the micro-mixer in the entrance. In my XM2 was subject to the following: It is crucial that the mixer output is not normal gepegelt, ie max. 0 db, but max. at -30 dB is ausgesteuert. Receipt of the micro-XM2 I then normally gepegelt to 0 db max.
If starting from the blender and comes out more to ensure the input of your camcorder aussteuert lower, the level in the optical while the camcorder Aussteuerungskontrolle normal, but it is heavily distorted.
In this case, incidentally, I find it not so stupid to ask first before you tested it. It would be conceivable that s.Camcorders what breaks when you just good luck on a much stronger signal in the micro-input einspeist.
Greetings Meggen
Antwort von Erich:
Hello!
With one stone, or with hands clapping, you can video and audio very well synchronized. There must be a short Schallereignius, whose cause the picture to see is (more or less).
If this synchronization can be s.der waveform editing program in the orient. The camera is usually so synonymous to the sound and this sound can be used as a reference.
The first method allows the sound to a 1 / 50 sec precisely synchronized. With the second method in more detail, only allowed the location of the camera from the very location of the microphone deviate (telephoto shots from a Distance). Also, it should be possible in the editing program instead of frame-based audio-synonymous intersection-intersection-based selection. If this is not possible, the less accurate synchro nation (1 / 25 sec).
Greetings!
Erich
PS
Digital system in most cases, synonymous with no direct linkage, in sufficient detail. I have not a normal song lengths apart running of Picture and Sound noticed.
