Frage von Basti27:
Hello,
can you give me Manufacturer or recommend certain models? There are at my shooting in a disco on. This is the first time that I see a head of light needed and I am with this issue fairly ignorant.
Have myself been on the search issue, I can just himself in the multitude s.Leuchten and sellers do not really form an opinion.
My question:
What looks like with LED lights ... good or bad?
What looks like with the power supply?
Budget is around 200 ¬ ... because what is useful to get or is worth more because of the rent?
Would I have a few tips look ...
Regards
Antwort von buildyo:
There are illustrative material on the Bebob.de LUX LED lamp:
http://vimeo.com/1308271
Antwort von Basti27:
Thanks for the link.
Although quite informative, help me but not really my question.
For more tips would be grateful ...
Antwort von Johannes:
Especially since the Bebob LUX LED synonymous almost the 3 times of its budget costs.
I myself use a Paglight C6 and am happy with it. I use mostly for interviews.
If you are still times 50 euros on your budget rauflegst I could offer you a second-hand. Otherwise you will get 200 euros for something less clever and a good LED eh not. What you for 20 euros for Ebayfindest is just as bicycle light, but not for video.
Apart from the Paglight brings with its own battery, with one burner, depending on the strength of 1-2 hours a film can.
Antwort von Bernd E.:
What looks like ... with LED lights ... good or bad ... Meanwhile, there are good LED head lights (eg of Zylight, Bebob, Litepanels), but they are all outside your budget. The halogen is still my favorite Panther Romy 75, but they should already synonymous with no little less than 200 euros to get his. The cheapest entry seems to be the C6 kit of the PAG, with whom I did not have experience.
... What looks like with the power supply? ... On some you can have one starting battery directly, usually takes place but the power supply from a Akkugurt, a neck with the camera battery or battery.
Antwort von Basti27:
... In addition to the Paglight brings with its own battery, with one burner, depending on the strength of 1-2 hours a film can. Thanks for the info and thanks for the offer. I think I'll borrow my first one and spendier little more money on later purchasers.
In any case I have something now to guide.
Thank you very much
Antwort von Kar.El.Gott:
Again and again cheap to get: Sachtler Reporter 50W, did mine with a 15 ¬ lead of Conrad operated, which I mentioned in a small camera bag placed hab.
Runs today and is not so expensive:
http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&rd=1&item=160320348204&ih=006&sspagename=STRK%3AMEWA%3AIT&viewitem=&salenotsupported
Antwort von nachtspion:
It appears with the Kopflich here again and again, and there are always the same answers. But what many of which is not recommended Romy etc. note is the fact that he wants to film a disco.
Now I've got now 4 years in clubs filmed. Conclusion. Purchase thee in no way an expensive head and bright light!
I was already several of the club owners asked the lights off please. You destroy the entire Athmo in the discotheque. As can immediately go to the Light J and tell him now that he's not longer needed for the lighting then provide you!
What you need is a High-aperture camera. Together with an LED head light is not too bright, works quite well in the disco.
I recently test method with the HF100 and the integrated LED light filmed and was surprised how well it works.
Everything else is a disco in general too much!
Antwort von Bernd E.:
... But what a lot of which is not recommended Romy etc. note is the fact that he filmed in a disco you would like to purchase .... in any case an expensive head and bright light! I was already several of the club owners asked to turn off the lights please ... Just want to know who always recommends the Romy! ;-) We rotate only very rarely in discos (but for television, where you can light the extra trouble apparently accepted), but I have good reason to Romy 75 specifically mentioned: it is dimmable, so you are not obliged, always with maximum to radiate. Otherwise there's still so synonymous fleece, or the film Frost s.Akkugürtel dimmer.
Antwort von geid0r:
Hi!
Look for Wolfgang's Blog by:
http://www.fxsupport.de/blog/09_08.html
From the middle of the Page he reports of two head lights, very detailed.
The head light of F & V for 179 euros goes completely out completely! If you have a diffusion film for davorklemmst few euros, you get the spot away synonymous.
Greeting
geid0r
Antwort von r.p.television:
From LED lighting for evening events, I believe nothing. Not more than in combination with a slide / filter disc to the light temperature to about 3200 Kelvin brings.
5600 Kelvin of LED lights in a disco are unacceptable for several reasons. Firstly, there is in discos rather reddish light. As unpleasant stings Taglicht very clear.
Secondly tolerated the different light temperatures.
And third, you lose the advantage of this special effect hautschmeichenden of 3200 Kelvin or below. The high-yellow or red highlights in halogen burners redness, pimples, freckles and wrinkles on synonymous. With LED light to see without all the while to look like in reality - but who wants to know?
It is even so that by the very warm light of the disco lighting illuminated with 5600 Kelvin People look very cold - synonymous with properly set White Balance to the fore. Advantage is different.
Also make it very expensive LED lights with no hot spots or blotchy illumination.
I remain synonymous my Romy75 true. Stable version. Dimmable. Beautiful light scattering. Point.
If disco operators a problem with the head light have nothing you can do. Most of these negative experiences with less sensitive camera crews made their head light for half an hour off but not as synonymous Searchlight abuse.
A less bright LED light, however, seems to me to disturb more than a brighter halogen burners. That is synonymous with the xenon light was observed.
And to the fading effect in dark surroundings suddenly connected with a head light to a minimum, I have an electrician of an additional auto-dimming between solder leave. A small switch on the amount of work depends s.Kabel and runs at pressures of the light within 5 seconds to the set maximum power s.Kopflicht internal dimmer. Since then, much less frightened faces and blinzelnde people. The switch is s.Rod support at the appropriate lens. So I do not always head up to the light to be a draw-and off. A rewarding hard work. Makes me wonder that there is no manufacturer has come out.
Antwort von nachtspion:
but I have good reason to Romy 75 specifically mentioned: it is dimmable, so you are not obliged, always with maximum power to radiate. Otherwise there's still so synonymous fleece, or the film Frost s.Akkugürtel dimmer. Yes, but ... if he is really just light head on the ground because he is buying now would like to shoot in nightclubs, then the simple Romy75 oversized (priced). As far as I know you still need extra battery NEN belt, and the price is right. An LED light head with integral Battery tuts on his case all the times.
LED's are lighting the way, with different temperatures ...
Antwort von r.p.television:
As far as I know .... you still need extra battery NEN belt, and the price is right. An LED light head with integral Battery tuts on his case all the times.
LED's are lighting the way, with different temperatures ... Just because a few cameramen of the public service with the expensive and inconvenient battery belts rumlaufen, we must not imitate. A simple belts of Matsuhita or Panasonic is just as good. To give you a belt pouch for under 20 euros and a little soldering. All together cost under 50 euros.
The different temperatures in light LEDs will be as far as I am only informed by tinting the glass reaches. So that means that the light volume is lost when a different light as the temperature reaches 5600 Kelvin wants. Or is there something new?
Antwort von nachtspion:
@ rptelevision:
Here is the expensive option of an LED head light by the variable temperature control knob offers. So, no foil or the like.
http://www.zylight.com/servlet/Page?template=p_9_z90
I work at Osram OS, so we shall inter alia, such Led ago. At the moment someone is an originally designed as a diving lamp LED light bulb as a video transform. Initially only Dimmable, then it should be expanded so as to function, the LED light from above link (variable temperature). My colleague assured me that the integrated Battery then 5 hours will hold.
For me as Eventvideograph is probably quite enough. I think the 3 High Power LED's are installed. I do once the thing is finished test videos to give a picture of the "technology of the future" can do:)
