Frage von movie-producer:
Hello,
I want my Headphones s.den AV output of my JVC GZ-HD7?, so I use the sound of the camera can hear. Unfortunately roars each Headphones I? and then the sound is very quiet. Unfortunately, the camera no headphone output, so I try it this way.
The camera has no way synonymous, the AV connection in the menu on Headphones port switch.
So:
Can someone tell me why the roars?
And if that with the AV connection does not work, because there are still other ways synonymous?
Misc.:
Cam outputs: AV, HDMI, USB, Firewire, S-Video, Component
For an answer I ever thank you in advance.
Antwort von mdb:
Since missing you like a small headphone amplifier.
Maybe something:
Antwort von shipoffools:
The Recommendation of the top I think not a good idea. In the worst case, ruin you so that the AV output.
Usually, each a suitable AV cable, which on the one Page a 4-pin Male has (; occupied with left + right audio, video and mass) and three-s.anderen RCA Male (audio left and white - , right-red-yellow-and video-).
So you need a device with RCA inputs for the left and right audio signal and a headphone output. For example, a little with the corresponding RCA inputs for audio (; white and red) and video (; yellow). Had the advantage that you may still synonymous as a control monitor for the sharpness and Kadrage can use.
Greeting
shipoffools
Antwort von thos-berlin:
In any event it is important to note that the 3.5 mm AV jack outputs s.Kameras four pole, a 3.5 mm jack Headphones / or line-in port three. Physically fit the times, but not electrical!
If the three-times in the four-socket connector, see, there is in any case, an electro-technical chaos. If the Headphones only mekrwürdige tones provenance, could be the cause is.
It now comes to your craft skills, how you can proceed.
Option 1
You Get in stores the four-AV cable with the RCA-type counterparts, cut the two audio-Male solder s.and there three 3.5 mm jack to clutch. Then you can use the Headphones. He is probably less strange noises to make, but is probably still quiet.
Option 2
You Get in stores the four-AV cable with the RCA-type counterparts, cut the two audio-Male solder s.and there tripolar plug to 3.5 mm. Den, you can directly into the amplifier og?.
Option 3
You take the existing AV cable and a matching besorgs to the amplifier.
Facilities 4 ......
You take the AV cable and any appropriate order to any other device as an amplifier to use.
Antwort von movie-producer:
Thank you for the answers! I will be equal s.die work!
MFG,
movie-producer
Antwort von Markus_Krippner:
4pol mini-jack according to 3x RCA you can find here:
http://www.reichelt.de/?;ACTION=3;LA=444;GROUP=ID2;GROUPID=3612;ARTICLE=40975;START=0;SORT=user;OFFSET=50;SID=26bT9@iKwQARoAAHmHIDU6a286c2319f28b93869e7053197f669e
... for 86 cents! The "dealer" is occasionally double-digit euro amounts to something.
markus ... :-)
Antwort von mdb:
The Recommendation of the top I think not a good idea. In the worst case, ruin you so that the AV output. Why should he be with the connection of an amplifier's output ruin? And why should that not happen if RCA plugs in between? That he should consider whether he has the right times (do I know if he really a 4 pin connector, or whether there are cameras, which detect how you reinsteckt times ...), I said yes
