Frage von Tomsen:
Hello s.die users.
My first post on your board, which I've used very of a new project implemented.
I want a helmet camera during motorcycling and join the Cam in the safe tank backpack stowed.
After long consideration and I have sought,
I have found here
http://forum.slashcam.de/gunstigster-camcorder-with-analog-in--vt32390.html?highlight =
and therefore I have the synonymous Canan MV 850i purchased.
The Helmcam is synonymous since and now I wanted to just try it and all what is? nix ...
As far as I know, the Helmcam on the AV in can be connected, s.ihr are 1 red and a yellow cable.
When Cam accessories in a connector, 1 input s.der Camera uses and then end s.anderen yellow / red / white has.
What should I do now?
I'm with my Latin s.Ende unfortunately.
The manual and the Sufu brought (for me) nothing useful.
Danke schon mal für eure Help
Greeting
Dago
PS
About the most detailed answer I would be happy, I'm a newbie in the field. (So please not too much Fachchienesich)
Thank you
Antwort von Stefan:
You probably need something
Shop 1Shop 2 Is it synonymous with three couplings coexist. Video signal is technically more demanding than audio. If you have a adapter with gold plated contacts, please take the.
Good luck
The thick Stefan
Antwort von Alpinist:
As far as I know, the Helmcam on the AV in can be connected, s.ihr are 1 red and a yellow cable. (s.wie is the power of the helmet camera regulated, because the recording camera gets no electricity! (I only ask because you did not mention it)
(b) is really the red Male Audio or possibly only the power connector of (a)?
(c) The power supply is ok and the red is really Male Audio: then you just need the above adapter to connect.
Regards
--
http://www.alpinisten.info/
http://www.gipfelsammler.de/
Antwort von Tomsen:
You probably need something
Shop 1
Shop 2
Is it synonymous with three couplings coexist. Video signal is technically more demanding than audio. If you have a adapter with gold plated contacts, please take the.
Good luck
The thick Stefan Ok, so I can hold on to me by the Cam, in any case is the right one?
Then I ever glad ^ ^
Thanks for the links with the couplings, since then it has an excellent.
So now, without advertising would want to do, I have bought here minicam
http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&ih=008&sspagename=STRK% 3AMEWN% 3AIT & ViewItem = & item = 180065243965 & rd = 1 & rd = 1
as it looks, but probably ists then the 2nd not yellow times for the current.
How do I s.besten the power come from?
with an equally therein Battery?
Or I could synonymous directly s.die Moppendbatterie go?
but I think NEN battery pack is already a better alternative.
BTW audio is rubbish? I have now at the 2nd Read my posts on. the Minicam Micro has not yet ^ ^
So werd ich mal ne power rise and continue to see
Antwort von nochmal der Tomsen:
I would like just one more confirmation of a connoisseur.
The Cam Canon MV 850i is suitable?
miniCam
Electricity and camcorder together verstöpseln?
If necessary, install a clutch?
Is that everything, or do I need anything else?
Question only because I have the Cam would otherwise send back and the 14 days are approaching their end.
Thanks in advance s.die hard helpers of the forum.
Greeting
Tom
Antwort von Stefan:
The DV Camera Canon MV 850i has analog inputs and can in principle external analog video after convert DV, ie at the output through the DV tape or to write.
Whether the analog video signal from the external analog video camera is fit, the practical test results. TV is much less fussy with the quality of the video as a VCR (which is the DV-camera in the case of yes). A "popular" use of this effect is the Macrovision copy protection ...
Power for the analog camera, you can NOT to 99.999% of the DV-camera move. A direct power socket will not be possible and the secondary power sources (LANC jack, micro supply) get as much juice as the imaginary external devices that need. DIY at your own risk. Normally it supplies the external camera with a separate battery pack or power adapter.
Good luck
The thick Stefan
Antwort von Jan:
Are you in playback mode and searched according to user manual Rec / Pause (often synonymous to the remote control) to the wars glaub Recording pressed?
With the normal Rec button can be found at almost any camcorder, the
record incoming signals.
In AV needs at least for Canon in the menu yet to be input, the camera assumes signals rauszugeben not to receive Sonyzb HC 90 auto detect if an incoming signal and then switches to input.
Must work - sorry operator error, the helmet camera needs extra power.
VG
Jan
Antwort von erniep:
The helmet camera is usually only the yellow times for the video signal, the camera being s.der red times for the 12V power supply. The camcorder no brand preference which must be a AV-in and with sound if the game is synonymous to an audio jack have. This is in most cases by using an adapter cable with on an individual Page 3 Male yellow / red / white and the other with a 3-pin RCA Male solved.
The camcorder also describes how to play and then the Record button in playback mode, press, then go.
mfg
Ernie
Antwort von robbie:
Zür power supply:
This small camera module working bit 5V operating voltage. in the area behind the camera, get out where the cable is simply a voltage regulator which eliminates the input of 6-18 volts makes a 5V voltage. in this area is synonymous a 9V battery, so you have a voltage source such as use it. simple adapter you can even solder.
the signal:
So I have such a camera module with an old sony d8 in analogy with tried, there is no clever signal arrived. s.tv but everything was wonderful. as modules with the new look I do not know.
schöne grüße,
Robbie
Antwort von jerazi:
Sodale, ich bins again
So the story with the flow is now regulated
minicam was just a trial s.Television connected and lo and behold, everything wonderful.
When your camcorder does not go, if not synonymous, I'm in playback mode and then use the Rec button.
Slowly, I am really s.verzweifeln.
The camcorder to convert Avin, I tried, but in the menu of Cam nix like found.
Similarly, the manual was nix.
White rat who is yet?
Otherwise, I put the project on ice.
Antwort von Jan:
We already had the right times of stress with the AV in on Canon had here but after some time gefunkt:
Bulletcam via AV in with Canon MV 650 i
VG
Jan
Antwort von rtzbild:
Sodale, ich bins again
So the story with the flow is now regulated
minicam was just a trial s.Television connected and lo and behold, everything wonderful. Na fine: o)
When your camcorder does not go, if not synonymous, I'm in playback mode and then use the Rec button. But you hit the button of the VCR Rec/Pause- function, or as the start-stop button of the Cam?
Remember when AV playback switch on, then with the Knöbbchen behind the monitor!
Slowly, I am really s.verzweifeln.
The camcorder to convert Avin, I tried, but in the menu of Cam nix like found. In playback mode, you can usually switch "in AV: Yes / No"
Similarly, the manual was nix.
White rat who is yet?
Otherwise, I put the project on ice. Last attempt: Go to Promarkt, McSau or the planet, take both with cams and ask the FRP. To teach you the right adapter rauszusuchen, possibly so that it knows of and can show you how to do this. The numeric value that you should be.
BTW: I would s.einem times-untreated samples of the output interested.
LG Olli
Antwort von Jan:
Last attempt: Go to Promarkt, McSau or the planet, take both with cams and ask the FRP. To teach you the right adapter rauszusuchen, possibly so that it knows of and can show you how to do this. The numeric value that you should be. Olli, you're optimistic, but with "my" chain, I think 95% is None can help you, perhaps when a seller with older legacy analog of 8 mm and VHS-C material ....
We had described, playback mode, AV IN switch for recording Canon Rec / Pause (either s.der Camera or on the remote control - should really go, then it did when SonyHC 90 and Canon MVX 45i is accelerated relatively quickly without previous In Studio with AV .....
VG
Jan
Antwort von Markus:
Olli, you're optimistic, but with "my" chain, I think 95% is None you can help ... Or the customer is lucky and it shuffles to a different client that is helpful and know-directly at the right adapter picks ... ;-)
Antwort von Tomsen am Ziel^^:
Sodale, I would say, ye are all spitze!
It runs on the detours of you described, but it works!
Do I still look at the time taken in front of everything to make everything new again cabled, step by step followed the instructions and thanks to you I'm successful,
Of interest to you I'll put NEN link to youtube when I get my Vid geuppt hab da ^ ^
Thank you again ye ne super Com!
Vllt see you some day somewhere again and I hope then I can help you ..
Greeting
Tom
PS. I stop the thread here and in the eye, much as I have the vid then still on the calculator and when I ship in the whole area NEN'm newbie, I vllt come again to you back
