Frage von luckydarter:
Hello!
Have a helmet camera via AV / in s.den camcorder connected.
Get the "Play (VCR)" mode synonymous a Picture on the screen, but as I suppose the picture on tape?
What settings should I make?
All I wanted to use a motorbike!
I am absolute beginners.
Gruß Martin ...
Antwort von Viejo:
if you s.der canon the analog mode are actively searched old, you need only to start to press.
then takes the camera on.
Antwort von Viejo:
Where is it to analog mode to find nothing in the manual about this.
when I press on record (only goes in Play (VCR) mode), then take on the cam, but only to memory card and then only 10sekunden long do I have to re-record press, it can not correct everything sein.Sound will not synonymous!
Antwort von norgold:
aalsoo. plug into the jack, power on the CCD camera, camcorder in vcr mode ... not on memory card, which funzt not s.camcorder (aufjedenfall in mv4i and 5i) is if you have the video where a push button aufklappst Rec / Pause (line in) is that this press and it should monitor the images in the CCD camera to appear, then press play and even takes on the kollege.
always think of off the CCD camera receives the first stream, else do not recognize the canon, which is an analog device is connected ....
oh, it must be for the art of recording a tape in it ever be.
much success.
Antwort von norgold:
Hello
plug into the jack, power on the CCD camera, camcorder in vcr mode .... as far so good. have the sd card rausgenommen!
Screen unfolded with no buttons Rec / Pause (Line in) online.
Must make the menu and make s.auf on, then synonymous a Picture on the display. But as soon as I hit record to me he says NO CARD
With SD card as I said without sound 10 seconds receptive only to sd card is not on tape.
Antwort von Bernd E.:
.... receptive only on sd card is not on tape ... Did you perhaps the TAPE / CARD switch your camera on accidentally by CARD?
Gruß Bernd E.
Antwort von Kollektor:
This is no preference on whether tape or card, the card will only record.
And I think solangsam me here can help because None None Helmcam a camcorder and a mv6imc has to dispose.
Thanks anyway s.alle have tried it or still do wollen.Achso have an inquiry on the canon website regarding the problems gemacht.Die it does not seem necessary to keep
bzw.zu to help me answer the hauptsache people still buy enough canon, and the fund stimmt.Ich have already played with the thought MV6iMC directly onto the bike to mount, That should be synonymous well funktionieren.Motage holder of Ram, the Mount best on the market nearest future sein.Wenn I get no solution, I will try to ram mount solution with external micro.
and again thank Martin s.alle ...
Antwort von clarakite:
Hi,
If you are with the helmet camera and your camcorder is not weiterkommst and now the helmet camcorder s.den want to build, I recommend you the solution with X-Shut. Camcorder is on a mounted camera angles and with X-Shut s.Helm fixed. This lets you set camera angles and logical manner synonymous camcorder anytime easily take off the helmet.
Look at www.helmkamera-systeme.de
They have since all the possible solutions helmet camera, so synonymous which where the camcorder is s.den gebastelt helmet.
Antwort von Kollektor:
Hello,
'm sorry but have not logged as described above, I proceed.
because I have a mv4i, 5i and 6 i have, besides 7 helmet cameras.
I did try to map to, for me it is not!
and of course you can not canon ... because the answer is little interested in whether you have a helmet camera which does not build kamera s.die wishes.
versuch last try ... if you have a video record of it! when the then synonymous fails, it is probably due to the with the recording device which is not true.
Antwort von mauriceg@gmx.de:
@ clarakite
I would never recommend someone a fortress where you screw in a screw will helm!
screw in screw shell to the shell is always to destroy and thus at great risk of accident due to the fracture strength taking.
no preference for what sport. tipp worse.
furthermore, this surreptitious advertising in different forums is not bearable. sorry.
Antwort von clarakite:
Hi Guest,
Shut-X has been used for years in sport parachuting successfully and helmet manufacturers are currently with MS Solutions in negotiating the system already at Neuhelm offer. The tensile strength of a carbon helmet or other plastic helmets (Protec, Skihelme, Kitehelm ...) is caused by X-Shut hardly affected. When motorcycle helmet, I'll give you right! Nevertheless, it is a great opportunity and flexibility to effectively enter Helmfilmerei. But unfortunately, not waterproof (See initial question).
And one more thing: Onboardfilmerei poses far greater hazards (entering into a higher risk for spectacular Recording) as a rupture of the helmet. Meanwhile, all the interested mind.
To reproach surreptitious advertising: That was the inforeichste Page I've found so far and unfortunately they popt on Google did not give up. Was just a tip - Who's bother ... Just ignore
Greeting of clarakite (watertight system, incidentally, I found ...)
Antwort von MaxIII:
@ clarakite
A waterproof helmet camera have you found? What a nonsense! I can at the Camera vorstllen just yet, but how does it with the camcorder? Packages you in ne Plastikgtüt? Un go as deep with your "system"?
Antwort von Macmacmac:
... A waterproof helmet camera have you found? What a nonsense! Why should it not waterproof helmet cameras and give finger? You need only times ten seconds to google and find some ...
Gruß Bernd E.
Antwort von neros:
Most providers have IP42 standard diving ... you should not anyway.
the camcorder into a dryback and ready.
ach synonymous and I think nothing of screwing s.helm.
Antwort von clarakite:
Even if it is surreptitious again, I deliberately let the domain of the dealer away. Schaut euch mal watersports package of the X-SportsCam to. Waterproof camera finger up to 5 meters - deeper, but the people were already synonymous (allegedly), water density cable lock, the rest (Battery, camcorder, Cameye) is in a stowed Aquapac waterproof. Did my package yesterday and everything will have been sunk in the bathtub. Top tight. At CU, the practice test.
Just google with X-SportsCam (Dutch (much water) but synonymous distributor in Germany)
For X-Shut: The scene Springer screws and nietet decades camera angle s.Helme. How else should drop shots and drop photos from the time of Fingercams have done? For the helmet is not a problem, but rather for the neck of the poor people ... Video
Antwort von RoundTheWorld:
Hello!
So I use the MV6iMC pacelog together with a helmet camera without problems
Because from your description I do not read it out: If you've switched on the VCR, you need the recording by infrared remote control to activate. That can be saved if a CamEye remote control s.den LANC connection dransteckt.
Gruß,
Michael
------------------------------
In 100 days on the motorcycle around the world
http://www.XTumDieWelt.de
Antwort von Jan69:
Hi Michael & all the other people here
Can you please me a better description.
On your website you say that you MV6iMC only with the Fernbedienund to VCR mode can (I can just switch it back s.dreh Off-Camera-Play (VCR) then only in the menu, since I only stands for "VCR SET UP "then scroll down to the" AV DV OUT "
I imagine that to "on", then the helmet camera, so he shows a picture of dam Camcorders.Die Camera is on Kass.nicht to Card.
Yet when I press the record button then take it to sd card on, and as I said just 10sek. I lang.Nehme the sd card it says I get "NO CARD". He is not to take on Video.
Gruß Martin ...
Antwort von Jan69:
Hello Martin,
Michael says with remote control is not the remote control of your camcorder but the CamEye sports. This is a LANC controller, is also in the LANC port on your recorder in, and turns your recorder and VCR in immediate mode (stand by), with another push of a button you activate the recording and with another you have stoppst Recording ( again stand by), long press switches the camcorder again. Absolutely brilliant and a must when shooting with a helmet camera
I could make you a sports CamEye send for testing. Mail me or call: www.helmkamera-systeme.de
Greetings of Roland (Hekasys)
