Frage von Bottazzoli:
Just had the first pictures of my new FX7 recorded in Premiere and am really satisfied. Up to a problem with the Image Stabilization.
Is this ON then migrates the Picture camera after each swing and the colors are changing. This can take up to 2 seconds. I have of course checked my Manfrotto 501, but it is not.
A simple test; Camera on the table, full zoom, rotate camera to the right until a sharp object in the picture appears, stop and no longer touch; The Picture on the screen moves for some time ....!? After the left the same and synonymous down or up.
This is something I've never seen, is not synonymous with the VX1000 or the VX2000.
Since the FX7 has an optical stabilizer, I can not explain this error.
Can anyone understand this test? I would like to know if this only happens with my camera or if there is a general problem.
Thanks for any help, Greetings from Namibia, JPB
Antwort von uffnik1:
If you have a tripod is used, you should reconfigure the stability eh parks, because you can not tell if it is a deliberate swing or a shake of your hand is. This is synonymous incidentally noted in the manual.
Antwort von uffnik1:
That is clear, but that is not with the stability I have after each new setting for up to two seconds before I can trigger, as the Picture "wanders" and the colors are not correct. An impossible condition in the animal movies!
I have with the VX1000 and 2000 during years filmed, but never experienced such a thing.
Gruss, JPB
Antwort von Markus:
The different image stabilizer seems to react completely different. One SonyPD170 or synonymous to the TRV310, for example, makes it not matter if they are activated with stability of the tripod is held from a TRV900 does all the bad and then even starts to actively to the Picture (ver-) wiggle.
In such a case you will have, as the stabilizer off when the camcorder on the tripod comes.
Antwort von Bottazzoli:
Hi Mark, thanks for the info but as already said: Whether or not Tripod Tripod, whenever I move the camera to a new building RESTRICT, "migrates" the Picture.
Could someone of you do the simple test, or on the table with tripod, steady ON, full zoom, horizontal camera move, stop and watch the screen, the picture stands still or moves is next?
I can be here in Namibia not to perform other Camera Comparison. This is a serious technical fault and I would simply like to know whether this only occurs with my camera, or synonymous with others.
Gruss JPB
Antwort von Markus:
... full zoom ... Ah, suddenly emerge as more important details! In full telephoto fall against unwanted movements of an image stabilizer of course, even if these are only minimal.
Since I now no longer camcorder in hand get (instead with friends under the pretext of celebrating Easter will properly), I can pass this test does not make the short term at least.
... Please hold the line ... ;-)
Theoretically, this phenomenon but each camcorder show, because the picture is indeed targeted by counter-movements of a flexible prism stabilized. If you now move the camera and then abruptly leaves in peace, the prism back to the starting position back to the next movement in all directions equally caused. This creates a tightening.
Antwort von Bottazzoli:
Hi Mark, thanks for the reply. The error occurs very synonymous with langsammen movements on and always evenly. One thing is your statement with the bar properly, but I can not accept this because the movement up to 2 seconds. In None other Camera (VX1000/VX2000), I can follow.
As I said, I watch a lot of animals, from the hand synonymous, and I have been doing this for 30 years, with or without a tripod and steady, but I see this effect for the first time
Schönes Fest and maybe you have time afterwards, JPB
Antwort von uffnik1:
This is a serious technical fault and I would simply like to know whether this only occurs with my camera, or synonymous with others. You're doing exactly the opposite of that which is in the manual, the camera is not behaving as you expect it, but it is a "serious technical errors"? What reason did you ask on which the Image Stabilization Tripod to leave?
The function for one-off and the stabilizer is on the way, a function key to program, then you have with the press of a button ready.
And by the way you should look synonymous, stabilization mode which you use.
Antwort von Bottazzoli:
Hello Guest,
Forget finally Tripod. The error occurs always on and that these programming functions may be synonymous, I have long been savvy.
Way erweisst a stable, synonymous with Tripod is very useful when you with the engine running from the car to film, because a 200 elephants rumlaufen.
Gruss JPB
Antwort von jotemwe:
Following your request, I have gem. Your "statement" of which you described a "mistake" s.meiner FX7 can also happen.
I turn, however, in certain situations to avoid the "mistake" from the Image Stabilization.
"Here steh 'and now I can not anymore!" ML
J. Michael
Antwort von Bottazzoli:
Hi Michael J,
Thank you for the trouble, so I know that this problem not only exists in my Camera. Of course I use the stability is not always, but for example at a free-admission, persecution of a movement is the movement of s.Ende Picture a half-width "walk back". Where the giebts sowas?
I would be interested in what other users have to say? An image stabilizer with life of its own.
Gruss JPB
Antwort von Max.3:
servus, filme synonymous with FX7.
also do not understand why you can switch to the stable.
wish you be happy to assist you, but if the manual is stable on a stand off then have the sony-Leutz it was thought. and so am I doing this if I synonymous with another model had otherwise.
may have your cam really an error, which was 2 seconds mhhh ... ... that I had never until now. check the heut 'times for you.
HDV is basically a bit problematic in the case of fast movements and vibrations, whether from the car with 200 elephant funzt? `I hit you with the thumb.
enrolled lg
spidertom
www.spidersmedia.com
Antwort von Max.3:
FX 7 stable test.
so now all 3 have stable settings of soft and hard by fear that your cam was actually somewhere abgekriegt has.
I could not achieve your results.
performed the following test:
cam on a tripod. contrary to the recommendation stable sony to on left. zoom auf.ordentlich fully rotated until a 27stöckiges hochhaus into the building .... and nothing comes with follow. by the extreme zoom I would almost as happened until I dahinterkam that I am the one who "nachzieht".
So sorry you will, willy-nilly, have to check your cam, or without a stable turn.
s all good tom
Antwort von Bottazzoli:
Hello,
Thanks for the info. In another forum about noise from the Camera discussed (such as loose parts in the camera). I habs Tries with gentle shaking of the camera. In off you can hear such sounds in the field of Optics. This must be what ohnen stable power swings.
But now, after shaking for some time was my fault and away the stabilizer works perfectly. But unfortunately only for a short time.
So please, before use, shake .....
Now the camera to service. Hopefully in Africa to set up.
Way, since I started in 2000 with the VX1000/2000, with Tripod and / or bar work over 100 hours of material gathered and published a number of productions have, I will, despite the user manual, synonymous continue.
Many greetings and many thanks for the help, JPB
Antwort von jotemwe:
Good day to Namibia and elsewhere,
synonymous with my FX7 "rattle" when shaking it - but ONLY if the camera is turned off.
If the camera is switched on, the "rattling" away and at max. Zoom Picture prefers for about 1 sec to about 5 mm after.
Please further reports about this!
Antwort von volki:
Even my mustard to
On the day when I received the Camera, however, V1E, but this relationship is probably no difference to its FX-7, I have made various attempts synonymous
Fixed Camera on Tripod
With HDMI cable with 32 "HD TV.
First, I wanted the color and sharpness setting in the menu ", since the forum in another topic was THE
Zoom fully open, at 2 meters distant object and with sharp focus by Extended
Now I am in front of the HD-TV and see this picture.
Suddenly, the picture moves about 1 cm in the vertical line on the TV.
At random intervals, moving the picture around this Centimeter always up and down, not sideways.
I clicked on the ground, like an elephant, has no effect. I stood next away, so yes the ground vibrates. Always the same. Earthquake was synonymous none
Then SteadyShot off and away was the phenomenon.
On request I have from Sony PrimeSupport receive the following:
>>> The fact that they have a slight flicker when the camera with SteadyShot stands on a tripod is normal. That was synonymous with the older cameras the case, however, this was not so clear, since the structure of the different cameras and this was in the course of time regarding picture quality but greatly improved.
In general, the SteadyShot for always use a stand off, as synonymous minimum ground vibration over the s.die Camera Tripod, be forwarded and a conflict with the SteadyShot cause.
With kind regards, Nina, Sony PrimeSupport <<<<<
The OP has already, with the PD-150, I noticed the NIE.
volki
Antwort von Jan:
You forget there was, there is a difference of 12 or 20 times optical zoom!
VG
Jan
Antwort von Glottis:
Hi folks, is all nice and good but the bar makes it synonymous with where I stand shoulder to the movies. Or you can stand shoulder synonymous not use? For what is the good stability even when shaking the picture away, it should not prevent this?
What is clear is the effect more noticeable at 20 times zoom, but already in the Middle zooming the picture horizontally running a half-width away, as soon as I can swing the smallest (of hand / Shoulder stand / on the table / tripod).
Gruss JPB
Antwort von Jan:
And yet Sony legends - The tripod stabilizer from movies - because you can discuss how you want .....
Everything else is probably Krümelkackerei (apology), I think any device s.jedem little quirks.
VG
Jan
