Infoseite // Import problem of old material with Canopus Digitizer



Frage von mercutio79:


Hello,

I have a really annoying problem.
If I have a iMovie with Canopus ADVC 300 to restore the old Video8 material wants, then the capture process is always in short supply on the tape (usually come through a change of scene with a long pause on the tape) from. One must always sit in front Calculator and the capture and observe where appropriate s.den early scene capturing the wind and again for a new clip to start.

Is there a possibility that iMovie is not simply captured and automatically stops? I have the setting "new clip at scene change" but it works probiert not synonymous ...

Is there possibly another capturing tool, which works better?

Thanks for your tips!

LG
Mercutio

Space


Antwort von Stefan:

I would not be the problem s.dem Capture iMovie program notes, but to see if the Canopus ADVC 300 can be set differently.

Look to see if it is the Canopus ADVC 300 is a setting for continuous DV timecode to create. If the instructions on this is nothing, ask at times Canopus support directly after.

Good luck
The thick Stefan

Space


Antwort von beiti:

My guess is that the video-8-material and / or the player is not used in the best condition. AD converters are very sensitive to non-accurate clock signals. Perhaps even a different (newer) player.

Another software, which according to the Recording interruption continues, would be synonymous a little help, however, individual frames could be lost. Therefore depends on the positions s.welchen crashes take place.

The safest fix the errors by intermediate switching a TBC (Time Base Corrector). There are video-8-Player, which already have a built-TB (eg better Hi8 camcorder). Otherwise, there are external TBCs synonymous, which, unfortunately, somewhat more expensive.

Space


Antwort von Stefan:

Even. The Canopus ADVC 300 has a TBC built.

Good luck
The thick Stefan

Space


Antwort von beiti:

Then it is really a software issue or a software problem insoluble.

If the tape actually gaps (ie, places where nothing is on it - not even played on an old recording) of the TBC helps synonymous nothing. This can only be a software to help in the resurgence of a signal recording the auto restart.

Space


Antwort von Stefan:

Not necessarily. I do not like the Canopus ADVC 300 to be serviced, so he is a consistent signal DV synonymous generated when the analog input signal fails.

It may be the threshold for the video input may be so deep that everything including the lack of input signal into a DV video is converted.

In practice, one would perhaps not exactly this behavior, for example, if you digitize tapes that are only partially recorded and are you like that, when unattended digitize s.Aufnahmeende stopped in order to save disk space ...

Good luck
The thick Stefan

Space


Antwort von Markus:

"mercutio79" wrote: Capturing ... stops the process is always in short supply on the tape (usually come through a change of scene with a long pause on the tape) from.
There is a contradiction in it: "for short breaks" and "scene changes with a long pause." ;-)

I own ADVC-300 and terminating at the long absence of a recording (s.ca. 1 second) digitizing. This feature I find very helpful synonymous, except when I once again send someone tape that recorded after each scene was rewound and viewed. This is not favorable and the people should be urgently abgewöhnen! If already rewound, then even before that should be a scene in which the tape later to be ranked, so that there is no unrecorded gaps exist.

Previous attempts with an upstream TBC which consists of everything that comes as a standard video just makes proceeded so far little success. Next, I will take a SVHS recorder hanging between ...

Space


Antwort von beiti:

Quote: This is not favorable and the people should be urgently abgewöhnen! This is probably your remain pious wishes. ;) The rewinding, watching and not professionally Wiederansetzen belongs to the same video standard as the beginner Herumzoomen senseless. That one for the cut s.Anfang and end of each recording a few seconds "air" should have, will certainly never herumsprechen. Some have not even curious that the tape a few seconds to start needs, and always cut the first half-set of a speaker from.

(OT) Other Department, similar phenomenon: I had previously often further articles, which some people in MS Word had typed. I will never know how many hours of my life I've spent, useless blank spaces and unnecessary paragraphs from Word documents to be removed. There is still "user", the word centerings with very many spaces to make each line s.Ende and press Enter.

Space


Antwort von Markus:

"beiti" wrote: This is probably your remain pious wishes. ;)
Fortunately, not quite. For new customers to take your statement, but for regular customers, I always (; current) send analog recording, does the information on the technical background of digitizing sometimes pretty good.

"beiti" wrote: (; OT) Other Department, similar phenomenon: ...
This I know only too well. We encountered this phenomenon very often synonymous in emails.

Space



Space


Antwort von Digitizer:

Verzeit me that I have this old thread dig again, but I stand at exactly the same problem as the thread starter. Use Canopus ADVC-300 together with Pinnacle Studio 11th

Weiss now someone has a solution for this problem?

Gruß,
Klaus Jansen

Space





slashCAM nutzt Cookies zur Optimierung des Angebots, auch Cookies Dritter. Die Speicherung von Cookies kann in den Browsereinstellungen unterbunden werden. Mehr Informationen erhalten Sie in unserer Datenschutzerklärung. Mehr Infos Verstanden!
RSS Suche YouTube Facebook Twitter slashCAM-Slash