Frage von nikk:
I have the following problem: Even in the preview when dubbing of the digital video camera (mini-DV cassette sets) to the PC via firewire, the jerky picture and the sound from time to time. This happens s.der first second, but you can record a full 60min tape and as synonymous with Ulead 9.0 burn a DVD, which will then be synonymous jerky. Played on DVD Players + Television. Have tried the import of 2 different cameras and with 2 different programs Ulead and Movie Maker, always the same. Can it be that the PC P4 1.8 Ghz, 512 Mb DDR RAM, 64 Mb Geforce2Ti GraKa, 80GB hard drive 5200Umin the data set, which supplies the camera can not be completely processed? Or Firewire cable transmits the data only partially? Perplexed, Nikk
Antwort von Gast:
Can it be that the PC P4 1.8 Ghz, 512 Mb DDR RAM, 64 Mb Geforce2Ti GraKa, 80GB hard drive 5200Umin the data set, which supplies the camera can not be completely processed? So that you can exclude. These conditions are quite sufficient and I think I've successfully with gecapturet similar.
Since the error with different cameras, and with different software capture occurs: If you play the tape in the camcorder, is everything okay? So Can you exclude a defect in the tape?
And by the way still:
I have worked either with or with Ulead Movie Maker. But is there perhaps a setting when capturing "lower or upper field first 'or something like that? Because I lose the moment in
Antwort von nikk:
yes, Picture and sound are in direct playback of the camera to a television completely ok. The thing with the half-frames, I still have time check! Thanx, Nikk
Antwort von Markus:
Hi Nikk,
let me guess: The operating system is Windows XP with Service Pack 2? That is, namely a typical error description.
Learn More:
"
Wenn Firewire nicht (richtig) funktioniert "
WinXP/SP2 - What to do in order for Firewire? I link directly to the second thread, because I still hope for a solution ...
Antwort von LaClemenza:
Hi Mark, Yes, in fact XP/SP2! I already had two patches loaded with MS, problem is still there! But if I film the video camera control, the zBMovie maker or video studio, etc. which just enacted, are therefore not able to record, runs smoothly. So FireWire port evt but ok, and anything in the Calculator to paralyze the data supplied synonymous lay neatly on the hard drive too. According to the analysis program Aida32 in capturing the memory is to record / busy only about 50% do not seem to be due. Read me now erstmal the link of you in your free time. Thank you, Nikk
Antwort von Markus:
There is still a similar problem:
General problem with device control
