Newsmeldung von slashCAM: LANC-Converter for Sony's new camcorder of rudi - 15 Jul 2008 08:17:00
Who's on Cam previously has LANC controlled and in new models, Sony has also annoyed that the jack is not available, can breathe a sigh of relief because in the many new Monitor-AV/R-Anschluss Cams (eg HDR -CX6, HDR-SR10, HDR-SR11, HDR-SR12, HDR-UX9, HDR-UX19), is synonymous old LANC signal. And as
with diesem Adapters
this is an auto-generated entry
Antwort von baerenbold:
... Now you could but the camcorders the shutter so constructed that it is only with an additional essay can be operated. This would then again 99th - ¬ for the accessories trade ...
Antwort von K.-D. Schmidt:
No manufacturer is forced to a remote control for its equipment. If this is the case, this is a special service. And as the Manufacturer of this service out, he remains on leave.
If the accessories industry to start, is their cause. After all, they earned money and jobs that depend on it.
And most importantly: No one is forced to set up a remote control to buy!
Greeting
KDS
Antwort von baerenbold:
... and without a camcorder LANC not synonymous!
But obviously I sink my head in deep gratitude to the manufacturers of these camcorders, which we poor worms their great equipment without any profit at cost price available!
Antwort von Markus:
Respect the camcorders times compared to the price. Today there are devices which (but not only by the price-wise) are so cheap that you must ask itself how such a thing ever built. And on the other page of the Consumer camp, there are still camcorder, which bring all the necessary connections, without any gimmicks to be instructed. These models are not only bigger (and the position must be available so synonymous), synonymous but much more expensive.
Or this:
It's like inkjet printers
Antwort von Meggs:
Someone knows if there is a Lanc-converter that is exactly the reverse works: From a Sony Tripod with 10-pin A / V remote times in a normal Lanc-Male.
I have foolishly the VCT-80AV ordered. In the long compatibility list, although only Sony camcorder listed, but it was always so with the Sony tripod with Lanc, then still with Canon camcorders worked together .. Which is synonymous to the HC-40, and had a right Lance jack. However, probably synonymous to 10-pin AV connector. In any case, this Tripod only the 10-Pin Male, of course, does not fit into my XM2, and I think nirgenwo an adapter to 2.5 mm Lanc.
Or someone with an older Tripod Lanc and would share?
Antwort von Yerri:
I have an almost mint condition:
http://www.sony.de/product/cac-tripods/vct-870rm
Tripod, which would fit. Since I am now the camera brand changed, can I control with the built-Sony tripod no longer start. Only an exchange would be for me because the other synonymous Camera useless.
Antwort von Meggs:
What brand have you been?
True, the VCT-870 would be at my perfect match.
The VCT-80AV, which I offer in exchange, allows for nearly all Sony camcorders, the remote control, synonymous if they do not have Lanc jack. The exchange would therefore be useful for someone who has a Sony camcorder without Lanc socket, and a Tripod with Lanc port.
If nobody reports, then I cut the 10-Pin Male s.and solder 2.5 mm jack on it. The circuit I have now found on the Internet.
Antwort von Yerri:
What brand have you been? At Canon. And now have the Lanc socket for the smaller AVCHD models synonymous saved.
Antwort von GueKno:
What brand have you been?
True, the VCT-870 would be at my perfect match.
The VCT-80AV, which I offer in exchange, allows for nearly all Sony camcorders, the remote control, synonymous if they do not have Lanc jack. The exchange would therefore be useful for someone who has a Sony camcorder without Lanc socket, and a Tripod with Lanc port.
If nobody reports, then I cut the 10-Pin Male s.and solder 2.5 mm jack on it. The circuit I have now found on the Internet. Meggen Hello! Did the problem just the other. New Camera with AV connector and Tripod VCT-870 RM with Lanc of the old Cam.
I would be willing to swap.
Tripod is in good condition and works flawlessly.
Antwort von Meggs:
Meggen Hello! Did the problem just the other. New Camera with AV connector and Tripod VCT-870 RM with Lanc of the old Cam.
I would be willing to swap.
Tripod is in good condition and works flawlessly. Super. This weekend's brauch ich noch. Then we could exchange.
Where do you live because you?
Antwort von GueKno:
In the near of Mosbach (Baden). I have added my profile, we can via e-mail to discuss more precisely.
Greetings!
GueKno
