Infoseite // LCD Screen Panasonic HDC-SD9

Frage von pieb1206:


Hi,

I have of a colleague from the States, Panasonic HDC-SD9 can bring. My problem is now, however, that I use the screen of the camera is simply not anbekomme. Is there any tricks? Must be before the card may only be formatted? Battery charge is, of course ... :-))

Thanks for your help, Pierre



Antwort von Markus:

Hello Pierre,

usually switches on the camcorder display car as soon as it is extended - unless the manual is somewhat different. If this is not the case should be and it still does not work, there is probably a fault. Then you have to the warranty claim, but with some costs, it is appropriate, Panasonic Germany you should refer s.Panasonic USA.

In the case of a submission to the United States look synonymous terms of formalities so that the recipient does not pay import fees (and the package is rejected and fee will be returned). Of course, that the camcorder on the import duty has been properly, otherwise it will be problematic. A U.S. camcorder can be seen already s.dessen different television standard and synonymous s.der model description (more precisely, the suffix after "HDC-SD9).



Antwort von pieb1206:

Hi Markus,

Thank you for your Anylse and the tips! To be honest, when I purchase the various television standard completely overlooked. Does this mean I can not my videos on the TVs in our common, or is there any tips and tricks to convert the videos?

Ohjeh, seems I did not go far enough to have thought at Purchase.

Regards, Pierre



Antwort von Markus:

"pieb1206" wrote: Does this mean I can not my videos on the TVs in our common view ...?
If you have a reasonably modern television, you can watch your NTSC synonymous. That should not be the problem.

"pieb1206" wrote: ... or is there any tips and tricks to convert the videos?
A conversion to PAL is not necessary (and not recommended synonymous), as long as you are recording only anschaust or (in an NTSC project) and post (NTSC) DVDs. - An adjustment is only required if you recorded with PAL-NTSC recording mixing want. It is only when one of the two formats into each other has been converted, which, depending on the tool with more or less visible quality loss (often a bucking) is connected.

And one lass prefers to remain synonymous with the camcorder for filming of artificial lighting. Since the device works with 60 Hz, but our power grid with only 50 Hz, it is especially for fluorescent lamps and incandescent lamps dimmed to a noticeable flicker.



Antwort von pieb1206:

Hello again Mark,

Thank you for your profound tips. If I had time to catch your fingers like this and left me a German model purchased. But if I can watch movies at least, I'm already happy. With Pal, I will not mix.

Thank you again then I will probably only piece of good times have to send :-( (

Regards, Pierre