Frage von cleo:Before I me an HDTV - Cam buy and with filming to begin, I must buy me a laptop. What basic equipment should be for video editing have? (Connections, memory, graphics card, extras?)
Antwort von JackJohnson:
Hello,
can you only of a PC notebook solution advise.
The graphics card in various notebooks are totally overwhelmed with HDV, hard disk is too slow, etc.
if you have a lot of patience and nerves impoundment (Jerkiness in the preview, etc.)
then one can at best, preliminary title and text, some sections, etc.
perhaps, the ma mac better, I can not judge.
lg thomas (FX7)
Antwort von PowerMac:
I know people who are with the MacBook Pro, a 1900 euro laptop, TV-cut contributions. They are not too lame. And although HDV and Digibeta/DVCPRO50. For HDV, the built-hard loose. For uncompressed SD should have an external firewire disk, or 800-S-ATA his. However, it is synonymous without. The graphics card is sufficient synonymous. Is ne Ati Radeon Mobility 1600 and for Motion Graphics, etc. is enough.
Antwort von AndreasBloechl:
And in other far worse-equipped notebooks are synonymous, I have already read that you cut and well-HDV can edit. I do not trust even my HP synonymous with, why not synonymous.
Antwort von rush:
to the original question again have to be addressed:
At least Firewire ports, possibly synonymous S-Video Out / In, etc. and of course USB 2 (Standard ...)
Memory can never hurt - Say disk with 7200 RPM as an external or equal to - what s.RAM Ordentlich (minimum 1GB) - Clean Windows / Mac system with no unnecessary programs / games and zugemüllt is no on-board graphics card but a reasonably usable with its own video memory which is nothing from the working memory abzwagt ... .
As an extra ... DV-player;) Saves Camera - but increases the cost:)
What will you ever cut?
rush
Antwort von AndreasBloechl:
The hard, I must unfortunately say again, why should there not 5400er rich, I have with HD Tach and HD Tune, the notebook panels (5400) with desktop boards (both 7200) and compare them to run about the same speed. The heat development in the notebook, you should always keep an eye on and there are faster disks of course, not so good. Heat content is the real problem with notebooks so I would not synonymous Fujitsu Siemens take because you can hear only negative on this.
Antwort von chaos_total:
Heat in laptops can be quite primitive, reduce the portion to a lattice (eg out of the oven) represent, and slightly increase the lattice, so the bottom of air rankommt.
Liebe Grüße, chaos
Antwort von AndreasBloechl:
If the heat of bad housing herausgeblasen helps this method is not really synonymous. My HP is three hours after rendering is still not really hot, I am very satisfied.
Antwort von freak°:
Day!
I would like a notebook synonymous growth, synonymous with the DV Editing (DV only likely) or a little bit 3D or AE is possible - how is this now with the hard disks? Is a 5400er? Or better yet spend more and
S.2 internal hard 5400er as Raid-0
b) a plate 7200er
c) external via FiWi 800 / SATA, etc.
about this?
Hoff jetz times it comes halfway ne consistent opinion concluded, somehow everybody says something else:)
thank you in advance! °
Antwort von Norge:
Moin,
So I cut and A. on a Fujitsu / Siemens Amilo notebook 1650th The part has an AMD Athlon 3200 processor and 1 GB of RAM. As an editing system, I have 7.x Avid and Pinnacle Studio 9.4 drauf. Naturally, the notebook is not as fast as my computer interface but you can work with it. For small things matter.
Many greetings!
Norge
Antwort von HZJ:
A good answer for it since a few days on the front page of Slashcam:
http://www.slashcam.de/artikel/Test/MacBook---Late-2007-with-Intel-X3100.html
Then you are with a current Mac Book is that it must not even be a pro. But memory and hard drive upgrade itself!
Other way around: Even with some current dual-core Windows laptops will work.
In MM Brochure (30 Nov 07) is a 17 "Toshiba with 2.2 GHz, 2GB memory, Ati graphics and two 200 GB disks for 1300 ¬. Sowas tuts determined. How good is the display, how long the battery holds and how Portable all fails, you have to watch, but the fundamentals are quite good.
A large and fast internal hard drive is very important, because in addition to operating system and software must be synonymous yes the paging and video files somewhere. An external USB hard drive is for editing of HDV is not really suitable.
Greetings, Bernhard
Antwort von HZJ:
The hard, I must unfortunately say again, why should there not 5400er rich, I have with HD Tach and HD Tune, the notebook panels (5400) with desktop boards (both 7200) and compare them to run about the same speed. The heat development in the notebook, you should always keep an eye on and there are faster disks of course, not so good. Heat content is the real problem with notebooks so I would not synonymous Fujitsu Siemens take because you can hear only negative on this. If 5400er 2.5 "disks and 7200 3.5" disks in the same test data quickly read and write, then the test setup wrong.
The limiting factors in Harddisks are:
the interface velocity
the size of bits required per area (density)
the relative velocity of the sectors to the magnetic heads.
The first two points are the same plates at about the same speed, but the relative velocity is at 3.5 "plates much larger, because the larger diameter of the discs (except indoors) are much more sectors in a unit time s.Kopf" fly past "and therefore more data. This is of course only for the same packing density plates.
The current hard comparisons illustrate the CT is very beautiful.
For example, if the interface speed of the board is slower than that of the tested hard, because nothing can be useful in coming out.
The point with global warming, however, is correct and important. Although many new boards 7200er significantly less heat than older models.
Greetings, Bernhard
Antwort von AndreasBloechl:
Sata notebook and PC are not. Perhaps it s.dem.
Antwort von PowerMac:
What do you want to say?
Antwort von Andreas_Kiel:
What do you want to say? Somehow, he probably tried to say that PCs (one of those notebooks are Submenge) does not have SATA interface. That is unfortunate and linguistically synonymous nor factually incorrect. In my PC potter multiple plates, with which those with IDE and SATA.
In an external disk, in order to increase the confusion, despite sitting FireWire or USB port, usually an IDE disk.
BG
Andreas
Antwort von AndreasBloechl:
Well now it is so difficult to understand in my PC no Sata indoors and are already in the notebook. And that is exactly what I have compared each other. Weis was not there not to understand.
Antwort von PowerMac:
Your German is more than a banana and barely understandable.
Antwort von AndreasBloechl:
I can not understand. It was briefly and factually explain, I'm almost 35Jahre German and German, I will never again. No seriously now, I thought that it is understandable rübergekommen.
Antwort von PowerMac:
"Notebook Sata and PC are not. Perhaps it s.dem."
I understand that nothing ...
Antwort von AndreasBloechl:
The user HZJ writes:
If 5400er 2.5 "disks and 7200 3.5" disks in the same test data quickly read and write, then the test setup wrong.
Just on this question should be the answer. Do you understand it now that I should perhaps have written or quoted. Then it would have been better understood.
Antwort von Chezus:
Honestly, I understand it still does not when I read your sentence ...
Well, fact is that his 2.5 boards a higher data density than 3.5 have it. Thus, the 5400 revolutions with a 2.5 but it is fairly close s.die 7200 he turns out a 3.5.
a disk with 7200 revolutions in a notebook / Macbook course again faster, but you need to use the so compelling? In SD cut enough in my opinion, the "slower" plate + one external panel is connected via firewire.
When HD is already behaving differently but since I have little to no experience.
I would advise you a MacBook Pro to buy, because then you have (of the hardware seen) all you need. Final Cut Studio on it and you can clean work
Antwort von Container:
I'm almost 35Jahre German and German, I will never again. One should never "never" say: 35 years just is not, as you see, because is meant with the above sentence "... I'm almost 35 years
German and
German, I will never again. Now, wait and see, then.
Antwort von PowerMac:
Interestingly, you can "German" increase. This makes the sentence but not understandable.
Antwort von AndreasBloechl:
Is synonymous yes no preference.