Frage von Andi1972:
Hi folks,
I've just found a Canon XH A1 increased in complete enthusiasm and a few sample recordings. Did the Camera now via FireWire s.meinen I-Mac (Intel) connected the camera to VCR / play and asked nothing - the Mac recognizes the camera.
Since my Final Cut Studio is not there, I have with my old cheap camera to date, I always HD movie from the life I used 07 and it was always flawless. War, however, synonymous ne cheap Sony camera.
Well now it is not in any event and I wanted to ask if someone can help me?
Andi
Antwort von Axel:
The first immediate step would be to update to iMovie from iLife 08
(Here The fact that it works, I can not promise thee synonymous. It's been very unusual for iMovie that Cam does not recognize. I will give you no shit, but we're hoping that you could not before the loud impatience Firewire port zerschossen
Antwort von Andi1972:
Hmm
So up to this moment where I was for the first time the new Camera eingestöpselt have always went FireWire 1a and ichbs treated very carefully.
Become an update trying times, but really should be in iMovie HD from the 07er package probelm not be ...
Even someone an idea ?????
Or let us ask it - it accidental someone because of the Movie Camera with problems I brought on the run?
Andi
Antwort von Axel:
Or let us ask it - it accidental someone because of the Movie Camera with problems I brought on the run? I then tried straight times. Also with Intel iMac, iMovie, # 6.03, instantly playback control, instantly preview, even 25F seem not to be a problem (at first glance). I assume that the manual p.109 thou hast abgecheckt.
The one or the other firewire cable can be synonymous defective.
Antwort von Andi1972:
Hmmm,
109 yes, I abgechekct. Does not a profound insight.
inziges notice is the -. he make the video settings according to the standards of your computer .. Do you have what particular set ....
Tell wirs times as my Camera is directly from the pack so to speak ...
Many of the light is off because yes?
The Fire Wire cable, I will tomorrow times with my old camera chekcen .... I hope ....
Andi
Antwort von Axel:
Do you have what particular set .... No, HDV halt. Before I was up and gecapturet have, however, I had all settings in all menus taken. This should, however, usually have no influence, except perhaps on the time code written, but even the default is actually set correctly. Still maintaining the nerves, and go through everything again. My Camera s.ersten days suddenly went "dead", and I got it is no longer to live, even called the Canon service. Here, I had only to realize that the "Lock" switch was slipping. I think a real bug: The switch is used directly s.der s.meisten
Record button and is definitely too easy.
Antwort von Andi1972:
Guess who yesterday when unpacking the service has called because the Camera was dead. Funnily have said there would be no "special revolving" because I already thought that I'm stupid. Well then I think what makes the lock switch and because schwupp gings ...
I just install it just arrived FCS times kucken whether what brings ..
If the nix and brings the Fire Wire Kabelüberpüfung do I sign up again ...
If it is what brings synonymous, perhaps helping my times then finding another reader .. In any case, thank you for the moment and until shortly
Andi
Antwort von Axel:
I just install it just arrived FCS times kucken whether what brings .. As I congratulate on the choice of software and the oppressive thumb, that nothing is broken.
Antwort von Andi1972:
hmmmm
So FCS installed. Although I am synonymous with the superumgreifenden Choice regarding the connectivity'm overwhelmed the computer recognizes the camera still does not. I, however, is what attracted the meantime. The Guide to 109 is yes, that one Sp-Play. and HD Down Conv. according einstelln needs.
When I can, however, the two do not exactly click .....
Because what is not true but ....
But what .... huaaaaahhhhhhh
Andi
Antwort von xracy:
When I can, however, the two do not exactly click .....
try the following:
off camera
firewire cable
camera turn
and go into the menu settings
off camera
firewire cable
camera on.
xracy
Antwort von Andi1972:
Hello,
good tip. Could actually change the settings. Recognize first the camera does not anyway.
For what system you should set the Final Cut?
HDV device control 1080i50firewire basicElement?
Andi
Antwort von xracy:
For what system you should set the Final Cut?
HDV device control 1080i50firewire basicElement?
I know I'm not really in the final cut, but sounds good.
xracy
Antwort von Axel:
It is unlikely that Final Cut Pro recognizes the camera, if iMovie does not. iMovie is an omnivore.
Have you heard of if you've found the error.
Antwort von Andi1972:
Dear helpers,
After today, I all day on our film project together and I spent feverishly thinking about making a solution, I next tried the same here and the solution of the problem ....
... Tip of the movie I was in the help menu on the issue of data import .... it was the problem of time. For some strange reason I say it in movie one of the most common problems in communication and computer camera, with different set times. When I had the Mac as a Time Zone Vienna and Paris, the Camera, there were 5 minutes difference and set the Camera expected in 12 hr mode and the computer in 24-hour mode. I then the mac s.die Camera aligned - it is very important from Camera and again - and unbelievable but true - it went ....
Somehow he vererrt I still have the HD clips by about half a second, which means they are about half a second later s.mac and everything you hear with the echo überspilen (Sound from Camera and Mac) but otherwise I think I am on the right track. If one is a tip for time transfer problem (because it synonymous clips of movie I somehow strange to be cut) I look forward ..
Otherwise, I hope I could help all the next in the future with this problem have
Happy sunday
Andi
Antwort von Axel:
Since I am pleased for you.
My tip: Skip iMovie!
HDV Firewire Basic, I believe was correct in Final Cut Pro, HDV recording also, depending on sequence 1080 25p or 1080 50i.
Unlike iMovie, you must pre-recording in Final Cut Pro Logbin Create (File> New> Logbin). For any questions about Final Cut Pro, I am happy to help.
Antwort von Andi1972:
Hello Axel,
Thanks for the offer. Will the Christmas season used to me a bit to incorporate in FCS and see now - I will certainly have many questions ..... :-)
Be so happy to come back the offer.
Beautiful Christmas days, I wish more
Andi
Antwort von thos-berlin:
Somehow he vererrt I still have the HD clips by about half a second, which means they are about half a second later s.mac and everything you hear with the echo überspilen Is it really just the sound? ME would be both. I know it from the PC world that ez wipe DV device and PC playback is always a degree of latency is, the sound wehalb I always synonymous with the unit wiededrgebe to me synonymous view the image there (in my case on DV -- recorder connected video monitor).
