Frage von Myrinne:Hello,
Nichtswisserfrage typical of me;)
Is it like plug any microphone that is designed for film use, directly into the camera "? If the cable is long enough, should eliminate the mechanical noise, yes. I am just interested in whether I on a detail in the technical characteristics must respect or if I can do it with any cable microphone.
Request for quick response and thank you a thousand times in advance!
Myrinne
Antwort von Mink:
What did you do with the microphone in front?
Do you have a microphone jack s.deiner Camera?
Antwort von Myrinne:
The microphone connector is present (and Canon XM2.)
We turn a monologue in the forest, while the camera with a steadicam moves always easy.
Thank you!
Antwort von kalle70:
Steadicam and external cable micro issues will probably make the cable because the stability of the Steadicam influenced.
Probably better external sound track with hand mic, or if Mike should not be visible with directional micro-fishing.
Antwort von Johannes:
When the Micro has a jack, there really is no problem.
What is the history Steadycam regard, I would fix it via a radio link or add the external sound, otherwise as I have said a cable of Steadycam always a different thing.
Maybe I could lend you a spark gap. Register if you have interest, e-mail in profile.
Antwort von Johannes:
When the Micro has a jack, there really is no problem.
What is the history Steadycam regard, I would fix it via a radio link or add the external sound, otherwise as I have said a cable of Steadycam always a different thing.
Maybe I could lend you a spark gap. Register if you have interest, e-mail in profile.
Antwort von Mink:
Spark gap is probably the best solution, but a micro synonymous Phone (s.einen broomstick; bound Angel) and the microphone cable as short as possible should keep going.
As I understand it would you not even run through the forest but have only a slight movement in the Picture.
Or (priced Lavaliermikro; lavalier) and minidisc recorder or änhliches device and will mean that the sound external. <--- That is good!
Antwort von hofnarr:
einsatz in with steadicam nothing should be connected with an external camera, which is not attached s.steadicam rig. necessary spark gap, when the clay directly into the camera needs.
the initial question: with the appropriate adapter cable xlr to jack you can connect the most popular microphones directly s.The xm2 if they do not require phantom power. by the adaptation xlr jack on the execution signal is asymmetrical, however, which makes the compound more susceptible to noise interference. The line length should be no longer than necessary.
Antwort von Myrinne:
Thank s.alle!
We have then but decided to include the external sound. I no longer synonymous know why I was against such a Bammel. ;)
Liebe Grüße,
Myrinne