Frage von Flanders:
Hello,
So I have the following problem:
I connect my calculator regularly with an external video source (DVB-S) and take things on. For this I use NeroVision Express. But while the recording is not the full screen mode and I must therefore be the only recorded on a fairly small monitor screen. If the full screen mode because during the recording at all or not but there's a trick?
zum Bild (Just an aside: A TV card for DVB-S, I know, but it has almost every 5 min. Störüng one second, which I found particularly annoying. For this reason I cabling satellite receiver with the PC and do so without any disruption to)
Thanks in advance!
Flanders
Antwort von Quadruplex:
If the full screen mode because during the recording at all or not but there's a trick? Do I lack experience fit ... Have you been around for fun times with VirtualDub tries? This has a very synonymous usable Capture module. There's nothing costs wär's worth the attempt.
A TV card for DVB-S, I know, but it has almost every 5 min. one second Störüng what I particularly annoying. Then it would look a measure, the cause to look ... Information on Manufacturer and Model could help here, otherwise you could of course synonymous with the manufacturer itself or in the rest of the WWW to look for tips to make. Sometimes it helps to have a different PCI slot to try. If your calculator a lot of programs running in the background, could also be the problem.
From basic wiring I sat receiver with the PC and do so without any disturbance to The quality is surely the worst way. I would try the satellite map to running was ...
Antwort von Flanders:
@ Quadruplex: Thanks for the tip!
So, hab s.Wochenende now my entire recreation invested in this thing: D: D
Was worth it!
The cause of the malfunction was probably the faulty cable from the LNB to the calculator performs. Course was exchanged.
And the other thing that I have DVB-S cards did not like was that the MPEG-2 recordings of
some channels even in the state is not demuxten of Cuttermaran were detected (by advertising strip off).
The solution to this (if someone's help should be):
- Recording demuxer
- The video file rename with the
extension. M2v be
- Cuttermaran cut open and busy: D: D
MfG, Flanders
Antwort von Quadruplex:
@ Quadruplex: Thanks for the tip! Gladly.
(..) Even in demuxten condition of not Cuttermaran were detected What have you used since? In Project X, you can even before the advertising demuxer mark and have not even with Cuttermaran (which I very much appreciate) rumkaspern ...
Antwort von Flanders:
So I use to demux TMPGEnc. Cuttermaran I personally find very easy to use and because I have to frame exact cutting attach much value, it is my absolute favorite (often take short videos of Eurosport that complicated "glued" to be => cut lists). Since I even take a few minutes to mux and demux in Purchase.
As mentioned earlier, I had DVB-S cards already aufgebeben since I MPEG-2's could not cut, apparently had only one of the images in
umbennnen. M2v suffice: D
Antwort von Quadruplex:
So I use to demux TMPGEnc. Now clears the fog ...
TMPGEnc like I have liked and synonymous with the thing can be a nice pigs make. Nevertheless: For DVB, it is certainly not optimal. ProjectX knows halt synonymous teletext / subtitle and can accommodate many quirks of digital TV without much spring reading iron out. Also PVAStrumento I would consider suitable for this purpose (and user-friendly than ProjectX).
But when it's now funzt ...
