Infoseite // No preview / recording dubbing of HV30



Frage von Nordi:


Hello,
I'm new here. PLEASE ORDER HILLLFFEE !!!!!!!!!

So .. it is synonymous with me so that no preview is displayed in programs like Pinacle, Magix or synonymous in Windows Movie Maker, but I can control the camera. But I see the movie (on the camera monitor and Canon HV30), but not in the programs.

(With the software, Pinacle Trail, Magix Movie Maker or Windows) can (I head for the camera; (; with Firewire board: Asus P5W DH Deluxe)), but he takes no picture at synonymous and does not show preview.

The odd thing is synonymous:
- In Magix 15, I can select the "DV camera", then what happens above happens (and no thumbnail, no recording, but controllable).
- But if I "HDV Camera" select them, then the program writes (;) after a response of the HV30 camera: "Could not connect to the device."

The odd thing is synonymous next:
- In Magix can I "DV Recording" just under 1 the DV Gerätertreiber "Microsoft DV Camera and VCR" I choose but I installed the following drivers: "Canon DV Device", "Split-Cam Capture" and "Capture WebCamDV . Of course, I control the "Canon DV" to (;'ve installed so these drivers).

Do what I set in the menu of the camera, for example, "AV-> DV?
Do I need any drivers?

In my previous Sony (and no HD) does it work.

Please help.

Space


Antwort von RickyMartini:

Try it once with HDVSplit: http://strony.aster.pl/paviko/hdvsplit.htm

Space


Antwort von Nordi:

Hello,

What's going on?
I thought this is very simple: connect HV30 via firewire, install the program it was - it does not work. To make sure I had put on me today "Video Deluxe 15" and a new firewire cable.

..... So "HDVSplit.exe" I installed. Do not see the Cam: "camcorder is not recognized or connected". In the Device Manager is "Canon DV camcorder appears, however.

Who has a HV30 and can help me?

Space


Antwort von Rolf Hankel:

"Nordi" wrote: Hello,

What's going on?
I thought this is very simple: connect HV30 via firewire, install the program it was - it does not work. To make sure I had put on me today "Video Deluxe 15" and a new firewire cable.

..... So "HDVSplit.exe" I installed. Do not see the Cam: "camcorder is not recognized or connected". In the Device Manager is "Canon DV camcorder appears, however.

Who has a HV30 and can help me?


Hello
Loading times the Trial Version of EDIUS NEO `s going down so

Gruss Rolf ...

Space


Antwort von bernie_r:

I type on the Firewire port, and their support system!

Not all XP versions support Firewire equally well. I know now synonymous not exactly what the SP well-supported and which not. Such views here in the forum, or in the Magix forum's threads are synonymous on this topic.

Look in the Control Panel / Device control whether your Firewire port is generally easily recognized by the system.
Install the latest drivers for the firewire card!

I have ne HV40 synonymous and no preview image. My friend with his Sony HC7 synonymous with me a thumbnail. In Magixforum was told that this often happens ...
Luckily, I can not take anyway. At the preview image, I can do without.
Bernie

Space


Antwort von Nordi:

Hello Rolf,
is not synonymous .... Meanwhile, I have tried HDV Split and again it was a "Canon HV30 camcorders have detected".

When I am in your program or in print Magix 15 to play, then this HDV split and I can start in the program to see a Picture (; and Sound) s.Computer hear. But it takes your program and 15 on the Magix not.

Man, man, man .... what is it for just a sh ***. Tried that because of the dilution * None of manufacturers?

SUPPLEMENT:
No idea ... But now it somehow. I think that any. I do not understand.

It could be:
1. The HDV1 or HDV2 in Magix must be selected.
2. That the HV30 will not be set to "DV" has
3. I let me show the display menu s.Recorder: HDV stands out.
4. I s.meiner Graphic Card rumgespielt (; ATI, in the "Theater Mode" and "HDTV Support.

Perhaps someone has an explanation. Magix recognizes the camcorder as: "Canon HV30 HDV (; PAL) VCR" as "DV device drivers. That can not.

Space


Antwort von DigiDau:

So what are the SP Play s.der HV30 is set?
The car should be set of to HDV.

Space


Antwort von RickyMartini:

Ad 1 (In Magix MUST HDV version of the source material; HDV tape to be set)!
Ad 2 The cam MUST be on HDV!
On 4 The graphics card has absolutely nothing to do with it! ;)

Space


Antwort von JOKA011:

Hello,

the previous speaker has not quite right when it is clicked in the bottom Magix HDV, it must be terminated synonymous s.Camcorders HDV out. But if you clicked in Magix DV, then must be terminated synonymous s.Camcorders DV out.

I also have a Canon HV30 and cut with Magix 15th Next time you should clarify whether the Performence your computer is at all suitable for HDV. I've combed through several forums and had to say, synonymous with his own experience, the minutes indicated on the package of Magix. Performence for the transmission of HDV is not sufficient, Magix being dubbed then always breaks off again.

Your problem seems to me more synonymous with having to do your Firewire interface. Check \ times but under> Control Panel, Hardware, even if the interface is correctly recognized by the calculator, and if XP has loaded the correct drivers. If that were onist then the next step, which extends Preformence from your computer. The preview picture is of course very much of it depends on your Graphic card, then here are min. Required 512MB video card memory, if you want a smooth, Picture. (as I say, other than on the package is available)

Greeting
JOKA011

Space



Space


Antwort von Nordi:

Hmm, actually I have a gaming PC. www.doderer-castle.eu (; Teamspeak install) if you want to stop by times. Below are some data from my system.
It seems, therefore, the teamwork between the settings and in s.Camera Magix 15 to be.

In what format Magix 15 stores the fact that the video format? He does it for me in the "mpg". Is this the verlustfreiste format?



--------[ Cpu]

CPU Properties:
CPU Type 2x, 2400 MHz (, 7 x 343)
Instruction Set x86, x86-64, MMX, SSE, SSE2, SSE3
Original Clock 2400 MHz
L1 Code Cache 32 KB
L1 Data Cache 32 KB
L2 cache 4 MB (; On-Die, ATC, Full-Speed)

Multi CPU:
Intel Deluxe Motherboard ID
(CPU # 0 Intel (, R) Core; TM) 2 Quad CPU Q6600@2.40GHz, 2400 MHz
(CPU # 1 Intel (; R) Core; TM) 2 Quad CPU Q6600@2.40GHz, 2400 MHz
(CPU # 2 Intel (, R) Core; TM) 2 Quad CPU Q6600@2.40GHz, 2400 MHz
(CPU # 3 Intel (; R) Core; TM) 2 Quad CPU Q6600@2.40GHz, 2400 MHz

--------[ Spd]

[DIMM1: corsair cm2x2048-6400C5]

RAM Features:
Module Name Corsair CM2X2048-6400C5
Module Size 2048 MB (, 2 ranks, 8 banks)
Memory DDR2 SDRAM
Memory Speed DDR2-800 (, 400 MHz)
Width 64 bit

[DIMM3: corsair cm2x2048-6400C5]

RAM Features:
Module Name Corsair CM2X2048-6400C5
Module Size 2048 MB (, 2 ranks, 8 banks)
Memory DDR2 SDRAM
Memory Speed DDR2-800 (, 400 MHz)
Width 64 bit


--------[ Windows video]

[ATI Radeon HD 4800 series]

Video adapter features:
Device Description ATI Radeon HD 4800 Series
Adapter String ATI Radeon HD 4800 Series
BIOS version 113-B50102-103
Chip Type ATI Radeon Graphics Processor (; 0x9442)
DAC Type Internal DAC (; 400MHz)
Installed Drivers ati2dvag (; 6.14.10.6947)
Memory size 512 MB

--------[ Input Devices]

[Logitech hid-compliant G9 Laser Mouse]
[G15 logitech hid-compliant keyboard]

Space


Antwort von bernie_r:

No. s.Zusammenspiel between Camera and Magix VDL15 it is not safe. You're writing yourself up next, that you are not synonymous with other programs can accommodate.
I would grant me s.Deiner place a Firewire card. Do not cost a lot. I am very sure that your built-in Firewire port is the cause.
Bernie

Space


Antwort von bobcorn:

So we went with me until the second time after the previous pc was lubricated.

First Thus magix video deluxe 15 installed,

And importantly, the hv30 synonymous if the software is not fit for the film, you should install the photo software yet complete, because there the camera - driver in there. Thus, the synonymous installed

magix only recently opened, rangehängt camera via firewire and THEN switched.

works perfectly over there and magix mpeg2 files. So much easier than with the hdsplit or what it means.

the long speech short sense:'ve installed the whole twice, exactly the same, but the second time ists then gone. :-)

Space



Antworten zu ähnlichen Fragen //


Microphone for Canon HV30 missing - recordings of diesel sound
HV30 audio recording problem
HV30-erase recordings Help!




slashCAM nutzt Cookies zur Optimierung des Angebots, auch Cookies Dritter. Die Speicherung von Cookies kann in den Browsereinstellungen unterbunden werden. Mehr Informationen erhalten Sie in unserer Datenschutzerklärung. Mehr Infos Verstanden!
RSS Suche YouTube Facebook Twitter slashCAM-Slash