Frage von MiXMaster:
HEllo!
I have a problem with dubbing my VHS-C videos to your PC. I transfer the videos from a camcorder (Panasonic R33) via cinch cables and an mpeg card (Xpert DVD Maker, V-Stream) on the PC. Capturing what I'm doing with the program, CyberLink PowerProducer. The picture will appear synonymous, but not the sound. Strange is synonymous that s.Camcorders runs itself no sound, BUT if I am the VHS-C tape into the VCR playback via cassette adapter, the sound is there.
Then I was thinking to get the videos from VCR to the PC. Have it with a scart adapter connected but then get no picture on the PC.
It would be very nice if I could help someone! Which one to me is really no preference. Also, the quality is not as important, although the picture was ok when capturing without sound.
GRuß Thorsten
Antwort von Stefan:
1 / monitored via the camcorder's manual if you can then select the soundtrack. Perhaps the wrong 'soundtrack is set to silent or sound is fully exhibited.
2 / Make yourself smart with SCART adapter. There are three varieties, of which a variety is totally unsuitable for this purpose.
Good luck
The fat Stefan
Antwort von MiXMaster:
Thanks for the reply only once.
Ad 1: I unfortunately have found nothing in the user guide for sound. Either I'm blind or it is actually described nothing to the sound, why always synonymous.
to 2: I have the scart adapter of the camera used was by. Thought that it should really go. There are no extra, slide out.
Any more ideas?
Antwort von Stefan:
Ad 2 This is exactly the kind SCART adapter with which it does not work.
Good luck
The fat Stefan
Antwort von MiXMaster:
Ok, because I can tell what a I need?
And has ne idea for someone Camera Sound problem?
Gruß Thorsten
Antwort von Stefan:
One for the signal direction VCR => PC. I think that's VIDEO-OUT. With a switchable VIDEO-IN/VIDEO-OUT you are in doubt on the safe and Page did not cost much more.
Good luck
The fat Stefan
Antwort von Markus:
A link of my electronic whiteboard:
The issue is not explained with a set Scart ...
