Frage von Zizi:
Hi Folks
No matter what I do .. to me it comes before the A1 pretty noisy!
As filming for her to stop?
So the gain and synonymous to AGCschalter I still roars off and they are part way more like my HF10!? ;-(
And one more thing: how they provide it to the Lowlight shcöne bright Biulder to get?
Shutter, gain, etc.?
And why is the full screen is much brighter than the field?
I have a NTSC Model!
Antwort von Axel:
So the gain and synonymous to AGCschalter I still roars off and they are part way more like my HF10!? ;-( So easy to "off" does not mean car without gain. You have the three Gainstufen in the user's own settings to assign values. -3dB is completely noise-free, 0 dB for most shots without additional light is very good, even without amplification, and the third value you need about where to see the pain threshold. + 6 dB for most. It then roars a bit, but still looks like film grain, which is so synonymous with highly sensitive film would see. But of course it's not a real Lowlight setting. Lowlight For real, you can not really do more than the AGC switch to "on" and to provide the best to hope for. I would avoid, wherever it goes. Even ignoring the camera in automatic mode, anyway, the position of the AGC circuit breaker, which is why you quit the fast. You can then have something with Noise-Reduction presets (Manual) experiment, but do not expect the camera to square the circle creates, it's not a bad Lowlight-Cam, but not synonymous remarkable.
Shutter, gain, etc.?
And why is the full screen is much brighter than the field? Very simply, they are at "Pal" exactly half as many phases of movement in "NTSC" (24 to 60) even less so extended for the same aperture / gain the Shutterzeit accordingly. In fullscreen mode you can only 1/48tel anyway Shutterzeit take seconds, so the fully automatic mode that this is not taken into account, then do not apply, but only the auto iris.
How do you full screen mode? Here, there's times to request `ne, and it seemed to be a bit complicated (as opposed to 25p).
Antwort von TheBubble:
And why is the full screen is much brighter than the field? Probably because more is exposed.
Antwort von Zizi:
Zizi has written the following:
And why is the full screen is much brighter than the field?
Probably because more is exposed. Yes actually ;-) Sure!
How do you full screen mode? Here, there's times to request `ne, and it seemed to be a bit complicated (as opposed to 25p). Quite normal in Premiere 23.97 oda so?
Why was there a problem?
But often I use the 30p mode as the not so very jerky and very clean but full returns!
But, explains in great detail thanks! actually logical if you look over it's head shatters ..
Antwort von Axel:
Machst du synonymous DVDs? Be 30p on PAL 60 easily played?
You need to, in the case of 23.97 p, in Premiere to do as they choose to default?
Antwort von Zizi:
Machst du synonymous DVDs? Be 30p on PAL 60 easily played? What is "PAL 60"? Have never been a 30p DVD ..
Loading Files via my Wlan to the multi-hard drive and see it out of there comfort an .. without burning and switch, etc. ;-)
But times had a project for my friend made with the HF10 is synonymous NTSC, by 30p and there was really no problem!
Why should there be a problem per DVD?
I think the 30p mode klasse .. Moving even bucking shots because only very low see here ..
http://www.vimeo.com/1478296 http://www.vimeo.com/1478296
http://www.vimeo.com/1478296
