Frage von Rolf Hankel:
Hello
I have for my HV 20 a submarine built housing, the actuation of the switch s.der A Cam.zum and off but is extremely complicated.
Can the electronics without harming the simple pole of the pros on a micro-switch interrupt? This means that the Cam. on the original switch is always switched on and off and the one on interrupting or closing the Pros Pols happening.
I have already made relevant.
Perhaps someone knows advice
Gruss Rolf ...
Antwort von tommyb:
Klar is das
However, it could be harmful in the long term, then an abrupt "off".
Antwort von Rolf Hankel:
Klar is das
However, it could be harmful in the long term, then an abrupt "off". Just comes to me, with my camera. only after the auto-off (that's what makes it so after a certain time)
again wishes.
I would be interested in holding, whether the electronics sowas übelnimmt.
Gruss Rolf ...
Antwort von Alan Smithee:
You can but synonymous in the setup menu, turn off the power saving operation. Then the camera off auto. Have just tried it - works!
Camera Mode -> Menu -> System Setup (5. submenu) -> Stromsparb. -> OFF
A Battery-breaker, I would not install, I have some electronic equipment with the experience that they will not survive long term.
Antwort von Rolf Hankel:
You can but synonymous in the setup menu, turn off the power saving operation. Then the camera off auto. Have just tried it - works!
Camera Mode -> Menu -> System Setup (5. submenu) -> Stromsparb. -> OFF
A Battery-breaker, I would not install, I have some electronic equipment with the experience that they will not survive long term. Thanks for the tip with the low-power operation, the Battery with the interruption, I will not realize, because it is synonymous my fear that the electronics do not like something and it has a great Cam HV20/30 as you do not want the lightest witted kill if they just have a regular viewfinders-up would have .....
Gruss Rolf ...
Antwort von Secretstar:
I would be interested in holding, whether the electronics sowas übelnimmt. What happens if the battery is empty? That would indeed be synonymous in the long term harmful.
Antwort von Markus73:
What happens if the battery is empty? That would indeed be synonymous in the long term harmful. The cameras that I know, remember the time and switch "properly" from, as long as there is enough power for it.
Regards,
Markus
Antwort von domain:
The problem with tape drives may be that a sudden interruption of the current band, the tape guide mechanism is no longer "ausfädeln" may, it remains wrapped around the head.
If different harddisks, which have large capacitors so that the write / read heads in the park position can be brought.
However, I would no special damages for deliberate power interruption synonymous with tape drives expected. Since not much can really happen.
Antwort von Rolf Hankel:
The problem with tape drives may be that a sudden interruption of the current band, the tape guide mechanism is no longer "ausfädeln" may, it remains wrapped around the head.
If different harddisks, which have large capacitors so that the write / read heads in the park position can be brought.
However, I would no special damages for deliberate power interruption synonymous with tape drives expected. Since not much can really happen. Ich hab mich nochmal go into my garage and found a way the thing on the original switch to the Camera On and Off Control. The low-power operation with the works synonymous, so I use the Cam. only at the beginning of the dive and turn off again must s.Ende
Thanks for the tips
Gruss Rolf ...
Antwort von fokuss:
if thou tions "correct" want to build switches, you can do so a capacitor construction, when the disconnect the battery for a short time the voltage stops, which are then slowly drops. (but does not know whether it works) so you bend the "abrupt" switch off "before.
[edit]
ups have not seen that already in dialogue capacitors were
