Frage von Hiesi:
Aaaaalllsoooooo
I have the Samsung VP-D351
Ich hab girlfriends so s.Wochenende with a few things and when we rotated the whole to the PC and wanted to pull in the description of what stood there rumblätterten of memory card, USB port, etc. .. Problem ... there is not even ne NEN slot for card or USB port .... It is a camcorder with a DV cassette and input ....
the cable that was we have connected to the PC but we found nothing .... (there was no cable DV input ... but for the whole of the front-line where the video is)
Among my questions:
I just absolutely need the cable for the DV input?
Do I need the drivers so that my PC Cam on the first to recognize?
And most importantly: Can I get from the camcorder to a tape recording has anything on the PC or can I just normally run on the television?
* desperate females looking for answers viiiieeeelen *
Antwort von wurmac:
I will now garnicht know what you have rotated as it * g *. The camera should have a Firewire port!?
According to description on the internet but in any case, a USB 2.0 port, somewhere would have to be found ...
Regardless, it is of course possible to capture video from tape to PC to play, the sun would be synonymous Television remain black ;-)
You need a driver or was not a CD included?
otherwise just in the workplace would have to look as the entire display
So after looking times the connections and hopes it will then synonymous s.euerm PC ...
With the analog inputs, I have no experience ...
lg
Antwort von Hiesi:
We have only rotated lustige sache .. Swiss American nix * fg *
There was no CD attached ....
I have only one computer, and an S video connection found (it was synonymous only to the S video connection cable included)
I've synonymous a "hole" found s.meinem PC where this cable reinpasst .... the player asked to kamcorder .... but on my PC is doing nothing ...
when I next to the port s.PC have read is correct but because synonymous DV / OUT
* wein * ichn now what do ....? should actually using s-video connection go? or do I need a DV cable to buy? and this is certainly of cassette to pc? * snif * * despair *
Antwort von wurmac:
should actually using s-video connection go? or do I need a DV cable to buy? Because I know, unfortunately, not much over it, otherwise you would have here in the forums back ...
and this is certainly of cassette to pc? * snif * * despair * This goes to 100% of every movie, every TV is contributing to tape recorded ... MINI-DV, DV, Digi-Beta, etc. ..
lg
Antwort von Eva Maier:
If neither of the PC has USB slot yet, there seems to be an older model to be?
/ E
Antwort von Hiesi:
Nope, my PC is ziemllich new.
There are s.PC NEN slot where the S video cable reinpasst, however, stands next to DV / OUT
Must I now NEN DV cable to buy? Or is because I do not have drivers for Cam? (but even then the PC should recognize the yes because what is attached)
Antwort von robbs:
Normally, this means Hiesi: you go into a market with Camera and PC or notebook and simply looking for a cable at the same time in any connections of both devices match. And then everything of themselves, believe me.
Antwort von Hiesi:
My PC has a alluminiumgehäuse but I do not slow the bstimmt by gegend if I'm not running on lan ne ^ ^
What I just want to know: is it possible? I know that yes it works now ....
I NEN custom drivers so it's going? None tells me but I do not think so
need to be synonymous with the s video cables go? I do not
should I buy a DV cable?
Antwort von tobibonsai:
Hiesi,
you have your whole want a so-called. Firewire connection concentrate (such as a USB connection, but twice as wide and with a dachförmigen Page).
And if your PC does not have this, you will be very quick to help prepare people in a wider circle in MM or find you a fairly inexpensive plug in your PC will be mounted and then everything looks much better.
We have clinics computer, the little money for counseling, procurement, assembly and installation. Something in the way would be synonymous not a mistake for you
Antwort von thos-berlin:
The tip, I can only confirm. If it is a fairly new PC, he described the Firewire (IEEE1394, iLink, DV port) with very high probability. Either as a version with the "dachförmigen" narrow side (That part really looks like a house, but mostly flat) or it is an approximately 4 x 3 mm large rectangular connector with a notch in the middle of one of the long sides. This is usually the type that synonymous s.der Camera is available.
If this s.Deinem PC connection is not available, then simply retrofit. Costs 20 euros and 10 minutes of work. The part does not need separate drivers and after installation in the PC and auto detected the Windows own drivers will be immediately installed.
You need only provide the appropriate cable (ie, either with two small rectangular connectors or with a small rectangle on a Page and the hausförmigen on the other)
The Camera is not included as additional hard drive or appear only as an additional device!
Then you can give with any video software available s.Markt the movie capture (capturing). When Windows is even a little editing program, Movie Maker, here.
The file is called DV-AVI and requires approximately 12 GB / hour. Please will not be deterred. Only to work and only s.Ende (!) Try to play a DVD (with then heavily compressed data volume) to create.
By using the USB cable for the reading of videos, I would strongly advise against. This is really only for the Fotofunktionn interesting and useful if the camera or a WEB-CAM function.
The connection s.PC, s.dem DV / Out and will be in an S-video cable hioneinpaßt is certainly a TV-Out. Thus, the PC can be connected s.einen Television.
Antwort von Hiesi:
So ding install firewire dv cable and me to buy? ^ ^
oki
Antwort von thos-berlin:
So install Firewire ding .... If s.PC really does not exist: Yes
.... dv cable and me to buy? ^ ^
That in any case.
I have a firewire card in the 15, - Euro-Class bought that works flawlessly. And a cable was synonymous here.
Antwort von Hiesi:
hab mal gegoogelt the connection and it s.PC've found (thanks to google it)
So with this DV cable FireWire port is Bessa?
how expensive is because the cables around?
(last question ... honest promise)
Antwort von Markus:
So with this DV cable FireWire port is Bessa? Did someone counted how many times within this discussion Hiesi the above question is? ;-)
Here are two links:
"
FireWire FAQ">camcorder / recorder s.PC connect, capture and edit images
"
Three categories firewire cable (and subsequent postings with prices)
Antwort von tobibonsai:
The cable you get of 2.95 to 29.50. Do not allerbilligste, which are often not quite so stable ... Remember that you have connected the cable very often in the hand and will have it very often in the socket and plug the camera back out of synonymous Holst. As worthwhile "somewhat stable" fast.
Antwort von Hiesi:
I only asked because I never get a concrete answer that .. püh;)
so I have now bought a Firewire cable ... fits into the cam ... fits in the PC .....
so ... but nothing happens ... and my connection if I s.pc voted yes because I will probably need to install nothing more ...
Why does it still do not because?
(Yes, I have turned on the cam synonymous)
Antwort von Markus:
I only asked because I never get a concrete answer that .. püh;) I know. That everyone has read it, I am just so surprised. ;-)
so ... but nothing happens ... Look, what the cause might have:
Antwort von Eva Maier:
What should happen when you look at the camera with PC?
/ E
Antwort von Hiesi:
So on my cam is in digicam ... characterized, however, stop everything on a small cassette on ....
As I have understood the general, I need just the right cable and close the cam s.den PC ...
I'm now a little confused because I have read that I need something which transforms the whole ...
So: Is it possible that Theo Practically I think Cam s.dem and connect the PC to recognize them and the whole rüberzieht?
(sorry if I am staying ... but it did wurmt me 2 days)
PS: the pc will find the cam and show ... As I said, I make them so synonymous to player so it is.
Antwort von Eva Maier:
Is obviously bad wenns wurmt or you're confused.
What a capture or editing the program vetrwendest you.
/ (E
Antwort von Hiesi:
Windows Movie Maker ... only .. I can do nothing because if there is no movie ...
Can somebody tell me because if the cable is sufficient for my cam ... ebend or not?
Antwort von Markus:
So on my cam is in digicam ... characterized, however, stop everything on a small cassette on .... Why do you think, a tape can not store digital data?
MiniDV = Digital Video Mini. There are only ones and zeros on it ... ;-)
Antwort von Hiesi:
I do not know .... I had never even filmed with much to do ... I know myself only with the classic camera and digicam from foto ^ ^
* little * anfängerlein
So ... extends the cable .. or at least it should be rich and my pc would have to actually recognize or cam?
Antwort von Hiesi:
Hello?
So enough with the cable of my cam?
I need drivers, or NEN does not recognize pc cam?
NEN if I have firewire port I have nothing further to install the pc so that he recognizes, or the cam?
please .... simple yes no answer ....
* me on cam and all scheiß excited * so makes no fun grummel * *
Antwort von Markus:
So ... enough with the cable of my cam? Yes. It is synonymous in my pre-before-last link. ;-)
I need drivers, or NEN does not recognize pc cam? No.. ...
NEN if I have firewire port I have nothing further to install the pc so that he recognizes, or the cam? No, because nothing more needs to be built.
Check it out if the Firewire connections of your PC has been duly incorporated. How to do this is my last link.
Antwort von Hiesi:
guuut ...
* wein * ich hab lust no more .... So unscrew pc and look if everything is drann?
are synonymous, but also 2 USB ports ... and that work flawlessly ... then the synonymous actually go ... * rummoser *...
I've left so me your views ....
Antwort von Markus:
... So unscrew pc and look if everything is drann? Uh, no. - Read the point you like times
Antwort von Hiesi:
hab in the device manager but nothing was seen IEEE1394Bus host called O___O
(I am very sorry I am so garnix know .. but thank you trying to help me)
Antwort von Eva Maier:
In addition, synonymous 2 USB Connections?
Because of the need Ieee on a Slotbech, because normal Ethernet and USB coexist.
/ E
Antwort von Hiesi:
okkk .. and that tells me exactly what now .... I've now understood exactly garnicht
Antwort von Hiesi:
I find that somehow nix ... 've given a bit rumgesucht ... it may be the firewire interface is somehow disabled or something?
Antwort von Hiesi:
Hello hello?
Antwort von Markus (und wieder weg):
... currently have no time ... important job. ;-)
Antwort von Markus:
If the firewire port does not recognize it will put the PCI card, look into a different slot - where the FW-Connections are not onboard. In some cases, helps das
Antwort von Hiesi:
* durchles *... * überleg *.... * again * durchles
aaalllsooooo .... yes because I have unknowing garkeine ... I think it will mean as much as if I had garkeinen Firewire port and built-which itself had to be somewhere else I drannbauen ...
Since the beginning of SSPC but was ... I do not think that this is? * stupid look *
Antwort von Hollgo:
* durchles *... * überleg *.... * again * durchles
aaalllsooooo .... yes because I have unknowing garkeine ... I think it will mean as much as if I had garkeinen Firewire port and built-which itself had to be somewhere else I drannbauen ...
Since the beginning of SSPC but was ... I do not think that this is? * stupid look * Well, as I say to the children's :-))
Aaaalso:
If your PC in an aluminum jacket on a computer - (or synonymous called Firewire) port on the rule. rear bracket should have, it can be assumed that this is synonymous wired.
The only stumbling block, based on such a PC to recognize the interface now could prevent, is that the interface in the PC BIOS is not enabled.
This is only a few systems in the case, but can occur.
So check on the safety times to see if the BIOS of the PC, an entry somewhere "ilink" or "DV" or "Firewire" to find it. Most are these interface entries under "Chipset Features" or similar.
Behind the entry should be "activated" or "enabled", so the interface is active.
If in your device manager still no trace of "OHCI compliant DV interface" or similar exist, should restart Windows to activate the BIOS lossprinten and a new hardware and then called synonymous entries exist.
Another good tip: close your DV camera always s.den PC before you turn.
If your camera s.ist while they infect you, this could be an expensive loss s.Deiner Camera lead.
Antwort von Hiesi:
1. I'm 20 and no child, I have just no idea of the inner workings of my PC ... Thank you.
2. I have the camera always turned on after I've connected.
Nevertheless, Thank you vesucht did it to me understandable to explain.
Antwort von thos-berlin:
Hello Hiesi,
here are some people who you really want to help. Turnkey solutions, however, we can not deliver and we can not synonymous to you come home. We can not watch your system, but are dependent on your descriptions. They have to be so meaningful as possible, so we almost synonymous only have a chance .... We have to turn your answers but synonymous to read that you're with the topic and our suggestions synonymous've tried.
*** Strictly Show Inger heb ... ;-)
If you have problems to determine whether the firewire card into the system, embedded or not, then ask a friend, colleague or friend if he sent you on-site can help. The can see your PC. Otherwise, you tie the money to the leg and go to a computer store to verify. Maybe you've even guaranteed and you can use the above "on the very silly" check.
I like to compare this with a car. There are, depending on the skill and knowledge of the car holder things that he himself can do and things that in a workshop can be made.
Back to the Camera. Actually, the only body firewire cable into a FireWire port gestckt be. If it works, then the problem can really only a setting thing or a real defect in his. There are synonymous cases in which XP Service Pack 2 Firewire port blocked ....
If in Device Manager but your Firewire (IEEE1394, iLink) interface, then my next question:
How did you verify that the camera is detected? In Windows Explorer, it does not appear as a drive !!!!!
(You DO NOT just copy the files vin camera to your PC or in the editing program Machst synonymous NOT "Open File" to the Filem "rüberzuziehen")
If the camera does not turn on the Windows reference to new hardware? Do you have cable and / or Camera s.einem other times in the PC Frfeundes or Bakanntenkeis tried? (It should be synonymous broken cable type)
Since the camera does not appear in Explorer, you need to capture directly in the editing program to try.
The tip of Makus means:
Open the PC case.
Look to see if the connection, the camera leads to the outside, inside some postcards to a large circuit (Firewire Controller) which result in a large port on a somewhat-Din A4-sized circuit (motherboard) is connected.
If yes: Then take a screwdriver and do s.dem piece of sheet metal in which the camera is connected above the screw. Then you can give this card from the PC, pull (camera cable arrange in advance). Danche are you looking for an other like empty connector on the main circuit (motherboard). Synonymous, there is a steel sheet, the rear s.der PC is. The decrease. Then the card is removed in this empty connector plug and re-install all the plates and screw tight.
If no, then the camera is connected directly to the interior of the A4-sized circuit (onboard) and the tip does not work.
Antwort von Hiesi:
And yes I know I versuchs synonymous ... Ich finds doof But if I as a stupid little kid hinstellt just because I am with camcorders are not familiar ...
That is totally cute how you tried to help me, I seriously thought ^ __ ^
Antwort von HoasBuacha:
And, come next? .....
