Frage von dragon:
Hello, I got me an Opera DVB-S Box (of pros / Company: Siemssen)
fetched, inserted, installed program and start.
LNB Settings: DiSEqS or so Port 1, Universal and Astra 1c, 1e, 1f, ...
Well then, it will search for garkeine transmitter.
What I would do wrong? 'm Really slow despair ..
I must still configure anything extra or is there another program for the box / can I upload a list of channels his vllt. funzt it?
Antwort von beiti:
I can not directly help you, recommending you for your question, but the following forum:
http://forum.digitalfernsehen.de/forum/
Antwort von dragon:
Hi, there have been reingepostet and do not get a really helpful answer "dragon2006" I am:
http://forum.digitalfernsehen.de/forum/archive/index.php?t-99739.html
Antwort von beiti:
Since you had the bad luck that this is quite a page-long discussion, which has now degenerated into insults, and perished in your request.
Although I generally know of satellite reception, but have neither the opera nor the box right software, you can not say exactly what you need to adjust where and what you could try. Someone who has the thing itself in operation, there could be a competent information.
In any case, would be a few more details to make sense of your receiving system to eliminate errors there:
1) How is the receiving system (what type of LNB, Multiswitch, DiSEqC) switch?
2) What kind / how many satellites (Astra, Hotbird ,...) is designed to plant?
3) Is the system fundamentally digitaltauglich, ie has s.dem connection, s.dem You are now connected to the Opera Box have already worked once, another digital receiver?
4) Has worked out the installation of drivers and software so far, or there was already trouble?
Maybe you can help synonymous this article:
http://www.stiftung-warentest.de/online/bild_ton/meldung/1345334/1345334.html
Antwort von Olli86:
hello, thank you for your answer erstmal.
unfortunately, know no one has the same box.
So my brother has himself a TV card and when everything works.
Astra 1c, 1e, 1f, 1g, 1h, 2c
DiseqC port 1, Universal
He has set.
On my cable it should not be synonymous, as it has with him does not synonymous with the box.
Antwort von beiti:
Depends on the card of your brother s.derselben facility, or the woht elsewhere?
Antwort von steveb:
In general, it is usually a DiSEq problem. Then you should look first. would be important to know how it looks cabling. which comes as the lnb / down lnc. there is still a multi-switch in between?
Antwort von prem:
Yes, my brother is s.der same plant.
sorry I can not say so directly @ steveb.
I know it is not like this but I can ask views
if you help you: your
Of've already tried out to DiSEqC Port 4
Antwort von beiti:
DiSEqC is only important if the facility receives more than 1 satellite position. If it is a pure Astra plant is, is totally no preference, which is set to DiSEqC.
Antwort von Rapsody:
controls only one satellite
Antwort von steveb:
if a switch signal, the receiver must have spread to several activated DiSEq miep ... ....
But if you can not give us more infos, my 6 numbers for Wednesday a safe forecast ...
Antwort von Rapsody:
I think we have a multi switch with 4 ports
Antwort von beiti:
Simple Multi-switch with 4 or 5 inputs (ie for 1 satellite position) not using a DiSEqC. The very old-fashioned, turn on the voltage 14/18 Volt and 22 kHz on / off. How many outputs of the switch is in any case no preference.
What has been set under DiSEqC, then plays does not matter. It is important of course, that LNB voltage and 22 kHz are active, but that should in any DVB-S software by default be the case.
Already makes me suspicious that this thing does not at all stations. Even if it is wrong because of incorrect settings, the selected frequency band and / or the location where a search is at least something else undesirable.
Whether the error is hardware-or software-rather, one can not say unfortunately, using remote diagnostics - moreover, if the unit is not known in detail.
Perhaps you should have in the other forum again open his own theme, and indeed with all the available detailed information about your system (look again vielleich) and the exact software settings (s.besten with screenshots). Write exactly what you have already tried, for example, that the map of your brother s.derselben system works, etc. This is already certain times unnecessary errors.
With such scarce information like this in your first post, the experts can not help you.
Antwort von steveb:
So in principle, be switched on for my Hauppauge DVB S of the software must DiSEq, otherwise does nothing ... with the sender search.
technisat have a multiswitch in front. also broke my old dbox2 then their operation (switch H / V) because not disequnterstützung had.
So once again: switch to front-DiSEq!
Antwort von beiti:
@ Stefan
Even DiSEqC Multi-switch (ie those with 9, 13 or 17 inputs) are backward compatible with voltage and 22 kHz, so that with non-DiSEqC receivers can see at least the satellite position, which is attached below 1.
Antwort von Simon_:
Hi
hab so ne synonymous box but I get only a few transmitters inside ... sometimes I ard and hr and war so zeugs times then I got back, no connection obwohls s.reciever works ... hab n LNB with 4Port a break (by the door ) is in there ...
can someone help me
Antwort von moorviper:
have the opera-s synonymous
the with the transmitters (which you can find any), I had synonymous then I noticed that this only s.einem USB1.0 connection is falling faster usb 2.0 is just fine s.einem
