Frage von echtlange:
Hi,
have so far my PC via cable connection s.den Television had in Color Picture, Sound ok, both PAL and PAL-B-G.
Now I wanted a wireless system and s.TV comes just a black / white picture on.
I have a Geforce 7800 GT, then use the S-HVS output, audio via sound card. The radio Übertragungsset is the
"2.4 GHz PC to TV Wireless Video Link VL42 set for transmission of picture and sound" of BMB Electronics.
After seeing all kinds of Adapters unsuccessfully durchprobiert have various types of graphics settings (transfer than S-SVHS, such as RCA-type variant with the Yellow connection ...) I tried baffled.
Has anyone an idea how to solve the problem might be?
Antwort von tv-man_sh:
Hello,
from a distance a little difficult to assess, especially as synonymous, I can not quite understand what you like with what components "knot" did;)
But, perhaps helping the already next:
Did you in your "experimental setup" s.irgendeiner be provided with an adapter cable S-Video (Y / C) -> composite (RCA) is installed? That would be my favorite things in black and white picture.
Such compounds are pure power, but no signal converter! Say: Y / C signal -> CVBS input = black / white picture. Please do not try, with such cable Adapter converts a signal that does not work.
If you are of your PC with a Y / C signal, then the radio link should be a Y / C signal processing (if it can, it has appropriate connections) and your TV Y / C input. The radio of your main course does not look as if they would Y / C signals (of the attack you from your GraKa) can process.
The solutions:
1. Spark gap and keep the PC side to make sure that it is a CVBS signal (vll TV card?)
2. New radio link, the Y / C signals can (probably expensive)
3. Signal Converter (WARNING: NO CABLE ADAPTER!) Of Y / C to FBAS.
Antwort von echtlange:
Hi,
thanks for the quick reply.
I use the times when my graphics card was. The three times in the RCA format in red, yellow and blue, and also the s-vhs (s.Male is so labeled).
The AV Channel actually has only a composite input.
The Nvidia drivers can be found on FBAS as Augangssignal switch ranges from only if a cable adapter is in between? (can do until this afternoon at home antesten).
Antwort von tv-man_sh:
For nvidia, I can not say much now, but if the GraKa can configure the s.ihrem Y / C output (the little round, 4-pole) is a CVBS signal, then you can with the included adapter cable is certainly the radio transmitter connected directly there.
Antwort von echtlange:
Did this info straight from the dealer will receive:
"The video channel will be offered the wrong signal. Verify that you have a CVBS video signal s.den video transmitter is connected instead of the S-VHS signal"
What is a CVBS video signal?
Antwort von robbie:
if the two + - Lines of Y / C components zusammenlötet, (the mass Lines synonymous, but that is not soo important) then in effect, a FBAS - signal back out!
the same would happen if you have the 3 components of a mixed signal components! the layman wondering, the technician is amazed ...
I have such an opportunity at times through the signal oscilloscope run ...
I've wondered myself synonymous, but habs dann mal perforce tried ..
Incidentally, I have fun at the synonymous in the other direction probiert, and lo and behold, s.einen Y / C input can be a composite synonymous - Signal infect ... Incidentally, I wonder still ... ;)...
schöne grüße,
robbie
Antwort von Bernd E.:
What is a CVBS video signal? "Color Video Baseband Signal" is the English name for FBAS.
Gruß Bernd E.
Antwort von echtlange:
Soderle,
I've tried different but unfortunately no positive conclusion.
I guess take a Treiberbug at NVIDIA, because the current drivers are selectable with the menu, either through Control Panel or as an option item from the taskbar. Both menus are completely different structure. One has only three output settings (S-VCD, 3-component, HDMI) and the other four (FBAS ...).
I place on the second menu FBAS so do I call when the first menu notes that this attitude was not accepted.
My Conclusion: I have no way to tell my GRAKA they should FBAS the data in the format to send.
Be still NEN bissel tinker to see if the plug together with the components of the 3 fold could.
Otherwise, probably not only TV or a converter card.
Kann mir da jemand recommendations or to say what should I look?
Antwort von Markus:
if the two + - Lines of Y / C components zusammenlötet, [...] then, in effect, a FBAS - signal back out! I can not adjust. The color component is missing namely the modulation and the appropriate s / w picture looks totally noise.
@ Echtlange:
You try all the time, a video in Color on the Calculator to get. There are many imponderable interfaces and settings, where the cause of the problem is.
Go look in the series before and after successive logically conclude that s.welcher cause it is
not. First, I would connect to the radio s.einem TV for free. Is this link okay, you can fully and completely turn the computer.
My recommendation for first-term analog / digital converter, you will find here: 3rd
FireWire FAQ">If the player is analogous. From TV cards I did not know enough.
Antwort von echtlange:
Hi Markus,
the transfer is indeed from the PC to his TV.
As a direct cable connection (across the house) is working properly, I first assumed that only the sending system may have the error. I have therefore ordered another but which produces the same error.
To implement your rat, I will present yet another attempt to start again and build a cable connection, but with this adapter on FBAS. If then a B / W Picture Show is clearly the case, it is colored in, I again baffled.
Antwort von tv-man_sh:
The Waldfee Holla;)
Blos not become too complicated. So, as I see it, you have two options:
1. You can do it, the GraKa teach them s.4-pol.-Y/C-Output a CVBS signal to create (then and only then can you synonymous use the adapter cable) or
2. You need a signal converter.
However, since "normal" pure signal converter is not necessarily favorable to offer is perhaps (at eBay or so), once used old SVHS VCRs auschau to date. The good old Panasonic NV-FS90, etc. have S-VHS and CVBS-IN-OUT. There, you can simply looping the signal and is good. That should be the cheapest way to send a signal to walk. These old VCR you get for $ 10, partly because they are defective, which does not disturb us, because we do so only as a signal transducer "abuse".
The new PC cards to be missed, which then may cause new problems (Winbugs is sometimes a bit stubborn), probably the whole problem only unnecessarily expand.
Antwort von echtlange:
Hi,
've just received the following information in the MSI forum found.
Oh yes, mine is synonymous with the Picture booting of Windows in color, only when the desktop comes wirds s / w (I just checked)
*** Hi, synonymous, I had the problem that I have an older television that is not with S-Video works, but had scart connector and the signal of the S-Video jack in my laptop on the TV only black and white playing.
Embarrassed by all the discussion forums in the world and am now gegoogelt become smarter:
The colors of the S-VHS signal of the laptops will be on two separate channels rausgeleitet and come into the Scart Male, in the Television is pure. The older television can, however, with one of the two lines (ie color and luminance) does not start because the TV there is a mixed signal (ie, two lines of a) expected. Some graphics cards have the option of the two color mixing and using only one line rauszuschicken.
For graphics cards, where it is not possible, you can manage with a trick:
Simply with a piece of wire in the scart times the two switch wires together, thus bridging.
Wow, such a time has 20 pins, which are there now?
Usually, the two Farbleitungen of S-VHS to PIN 15 and PIN 19 of the Scart connector cleverly. These two pins must be using a piece of wire bridges, ie, be together.
Where are now these two PINs, no times when the PIN numbers? Quite simply, PIN 20 is always the PIN, in the angled corner of the plug is placed. The PINs in 20 straight series s.PIN have the PIN numbers 18,16,14,12 etc. 19 is the PIN, the PIN on the number 20 on the extreme end (ie slant on PIN 20) is, in this series then it goes next with PIN 17,15,13,11 etc.
So we have to keep the PIN on PIN 20 (ie 19) and the next in the 19er series (= 15) are connected. It is of course, that the times to be open and the connection of the rear of manufactures, because otherwise the time would no longer in the TV book fit.
Then you have a color on the TV.
PIN 15 is the way, the RGB cable for Red, but of many manufacturers, so hab ichs read as synonymous mass for the color used.
Attention: The Handiwork s.elektronischen parts at their own risk, it can not accept responsibility for this will be!
Liebe Grüße
Candy - the one and only! ***
