Frage von sir_fogg:Aloah,
I already have in another forum posted, but unfortunately did not get a reply, so I hope to remedy here.
For a long since I want so again with my dusty Premiere 6.0 video cut, but if I for example in the Monitor window to play the clip, then stop it immediately if I had my camera turned off. Once this is connected but will preview on desktop and on the camera output.
The playback setting in the project settings to change this, unfortunately, not synonymous!
Can someone help me? Merci.
Antwort von Rainer Müller:
Aloah,
I already have in another forum posted, but unfortunately did not get a reply, so I hope to remedy here.
For a long since I want so again with my dusty Premiere 6.0 video cut, but if I for example in the Monitor window to play the clip, then stop it immediately if I had my camera turned off. Once this is connected but will preview on desktop and on the camera output.
The playback setting in the project settings to change this, unfortunately, not synonymous!
Can someone help me? Merci. Hello,
You need a digital converter analogy, as z, B. a. My tip:
You purchase a defective on eBay where the DV-in input and the video still does analogo. For so ne Cam you pay max. ¬ 30.00. Now you connect the calculator with the Cam via Firewire cable and hang s.den analog outputs to your monitor.
Gruss
Rainer
Antwort von ksr:
If the DV playback settings in the project settings are correct (ONLY playback on desktop) and the Camera from your PC completely separated (abstöpseln!), It works!
You need no extra A / D converter in the form of a - you have to yes, otherwise no Picture aud the display (= DV-in).
Antwort von sir_fogg:
Yes, I have encountered in the project settings only desktop elected. Camera is synonymous fully abgestöpselt, but it does not! Had never had such problems. Formerly synonymous times was an update to 6.1, but have apparently entered on the Update function.
Antwort von Jörg:
but everything is there ...
http://www.adobe.com/support/downloads/detail.jsp?ftpID=1437
Antwort von sir_fogg:
Update (thanks Joerg) and now it works! Well, I did stop the internal update starts, but it showed me no updates.