Frage von drbarbossa:
A big hello s.alle!
I work usually with Premiere CS3 and am so happy. Now I had over Christmas, the new version of Premiere CS4 to test and install it immediately to our holiday movie completely cut.
Now I stand there for hours and try to export the movie. Forgiveness. Now I have CS4 again with all components uninstalled and reinstalled my CS3.
My problem: HELP I can on my CS4 data created in CS3 does not import!
What the hell ... who can help me or give tips?
Antwort von jazzy_d:
The trial version will not allow export, since test version.
Backwards compatibility should not be the whole. But since Adobe can certainly make a statement.
A current ertsellte Word File (*. docx) is an older synonymous Word can not open.
Hopefully you have a backup copy of the CS3 project.
Antwort von KlausZ:
Hi,
the same problem I had was with Premiere Pro 2.0 which I edited 1.5er Project. That could be under 1.5, I no longer synonymous read.
Either you have happiness and a backup or you 'need' to CS4 upgrade now, since no other chance.
Antwort von drbarbossa:
S.alle Thank you for the enlightenment.
So there is not only possible without the film CS4 data read out?
Gruß,
Barbossa
Antwort von jazzy_d:
The cut film, you can probably forget it. The raw data / source material, however, are / should in any case still be present. Must halt new cut.
Such experiences forget in any case and we never will in future keep it the same mistake again to make. But with a little logical thinking would be sure to come first, a safety copy of the CS3 version to make before you with the production data in a new version and especially a trial version goes.
Sorry it is not pleasant news for you there.
Antwort von Jollitop:
I've not yet tried, but you could try the following times:
The *. prproj files are basically just XML files that you have with any text editor can open. You could jokingly times in CS3 you get a similar project together and then click the two files *. prproj compare.
Perhaps it is only trifles, in which the files differ, so that eventually the CS4 file by changing less information given CS3 can make file.
I admit, is a somewhat tedious method, which is synonymous corresponding XML presupposes understanding, but bottom line but it could take some time saving.
Antwort von KrischanDO:
Moin,
there is not the EDL (Edit Decision List), with one platform, and version-independent program ( "Haha! good joke, centurion!") cut commands can be exchanged?
Perhaps it is indeed of CS3 after CS4.
Regards
Christian
Antwort von Debonnaire:
The trial version will not allow export, since test version. Wrong! Adobe Trial versions can, in principle, everything that the full product can be synonymous, except for one or the other (foreign-) plug-in that is not installed with.
What happens when you click "Export" go? I assume that the item exists and is active. Describe the end times and what you observe, then we can help you possibly sound!
Antwort von drbarbossa:
So I have now done the following:
My CS3 Premiere CS3 Suite including properly on Adobe uninstaller removed because many people think that this is a conflict triggers.
Then I got the test version of Premiere CS4 synonymous removed and after restarting Premiere CS4 trial version installed.
The menu is the Export to "Media", "Adobe Clip Notes" and "EDL" active. There, I click on media. It opens a window for export settings. Quicktime DV PAL is the choice. After clicking the Export to open the program "Adobe Media Encoder" and then like a so-called "batch window waiting." Here then I click on "start queue"
After about 5 min is shown in the list on the right a yellow triangle with a callsign. When I click on it opens a popup window and it is to report the following:
**************************
- Source File: / Users / zaferertempro / Library / Caches / TemporaryItems / Istanbul 2.0.prproj family vacation
- Output file: / Volumes/MOBILHIRN_1/Privat Productions / Cut Premiere Vacation Istanbul / sequence 01.mov
- Using default: Custom
- Video:
- Audio:
- Bitrate:
- Time for encoding: 00:35:33
Wed Jan 7 18:54:04 2009: encoding is not successful
-------------------------------------------------- --------------------------------------
Reading of the source is not possible. Check to see if this has been moved or deleted.
-------------------------------------------------- --------------------------------------
***************************
Basic info about my system:
MacBook Pro with 4GB Ram, 2.4 GHz Intel Core 2 Duo
OS 10.5.6
Antwort von Debonnaire:
And? IS the source of where they should be, just as she does and does it work? What happens if you type in exactly this source file in Windows Explorer, double?
Antwort von drbarbossa:
Everything is place where they should sien. So nothing changed. The raw data as well as music and graphics.
When I open the folder and the file CS4 double click, it opens and I can cut the film or to view, edit, etc.
What I have noticed is that after a while, after Adobe Media Encoder and I opened the window with the queue can see that in the background, a program called "IZotope" opens demo and inquires whether or Authorization, where the window every time freezes. I can not click away yet. It's just there and disappears with only one reboot.
What is this program? Hang it with Adobe Media Encoder together?
Should I uninstall everything again and with a new user account, the trial drauftun?
Antwort von Debonnaire:
I had several problems already synonymous with installed and uninstalled CS versions. I would go the hard way, and clean everything Adobe CS-Moderate again uninstall and then reinstall it.
To go just as before, as for the Clean Scripts for CS3 and CS4 is:
1. CS3: http://www.adobe.com/support/contact/cs3clean.html
2. CS4: http://www.adobe.com/support/contact/cs4clean.html
Antwort von drbarbossa:
Now I have everything removed from the system again. CS3 and CS4 Premiere Pro not only but the whole CS3 suite.
Then I clean via scripts for CS3 and CS4 everything away again.
Then, to make sure I have a new user is created, and made a fresh start on this new user just the trial version of Premiere Pro CS4 installed.
Result: still the same error!
Well, after reviewing the error, I have seen that the source which he can not find, actually has another orphan! Why? And how do I change this? Finally, the overall Project is always on the same space on the external disk. It is so synonymous in the editing program, without which he indicates that any media is missing.
Is it perhaps because it is on the external disk is?
Antwort von drbarbossa:
Long after hours work ... it is synonymous not the cause of an external hard drive.
I then read somewhere that after updating to 4.0.1 all errors eliminated. Nixt since. Also I have done and still.
I got the feeling that something is wrong because :-)
I wonder why the queue window of the Media Encoder a file source that I did not enter the synonymous and have nothing to do with the file has. As always, the source on this? I've seen nirgendswo a setting where I can change it. So it is obvious that the coding can not be carried out, because there is so synonymous nothing!
So the problem lies with the Media Encoder to a wrong source file over. What can I do now?
"Reading of the source is not available. Verify that this has been moved or deleted."
Gruß,
Barbossa
My Calculator:
OSX / MacBook Pro 2.4 GHz, 4GB Ram
Antwort von Debonnaire:
If you have a problem with the source file in PP-Project, you can visit one of two things done:
Either ...
1. Open the Project in PPCS4, import the correct source file into the Project and activate it by clicking on it in the Project window. Then, you take a right-click on a clip in the timeline, what the (new) source file SHOULD be, and choose "Replace Footage> From Bin" from. This will cut the "wrong" clip from the newly imported, "old" source replaced.
Or ...
2. How to get next to you before you said above, is a PP project file nothing more than a (simple) XML text file in which you Mircosoft Editor / Notepad easily open, browse and even edit it as long as you have the syntax of XMLs not only alterable. You do so, for example within the Notepad, a general Search & Replace the path with the existing file name, wrong source with the correct path and file name of the new-to-use source. Simply VERY well, make sure you are typing everything perfectly correct! Then you can open the project and everything should work! - Mach s.besten but before the project file of a backup copy!
Is this now?
PS One more general tip for dealing with a PP project file in Notepad level: With the Search & Replace method can be as fast and convenient a modified path (eg due to a different drive letter) of your source files for the entire Project Fit!
Antwort von drbarbossa:
I will now create a new project and how you've described everything new Import. Thus I did not re-cutting needs, I wanted to cut the information at least take over. Where can I find those?
Regards,
Barbossa
Antwort von Debonnaire:
I would not do so!
Choose your preferred method instead 2nd top of the Notepad and replace all references to the wrong source file with the path and filename to correct.
Or vice versa: in search of the PP project file in Notepad, the exact path and filename of the embedded, but the wrong source file and then move the desired source file using Windows Explorer s.den benne correct location and file them according to the order included the wrong.
If you then take the Project now open in CS4 is PP under the old name and new location of the correct source file and find all the cuts and effects are preserved!
Antwort von drbarbossa:
it has brought nothing. Even if I have all the files he needed to encode it move where it looks, says he is still the source s.der is nothing. To verzweiffeln.
How can I just cut my film export and CS4 einfürallemal damn.
Ps Do perhaps, that I still have After Effects CS3. Is it? Then I remove the program synonymous. This is not normal. To CS4 you have to use several programs to remove tstststs
Antwort von Debonnaire:
Ps Do perhaps, that I still have After Effects CS3. Is it? Then I remove the program synonymous. This is not normal. To CS4 you have to use several programs to remove tstststs Well, a pity that you do not just have done exactly what I'll elaborate in detail and had described next:
(...) I would go the hard way, and clean everything Adobe CS-Moderate again uninstall and then reinstall .(...) The problems may very well just yet intstallierten of other components CSx came! Adobe has done its homework since CS3 is not truly made about the compatibility of different versions of CS are ... Well ...
Extra Question 1: If you IM PPCS4 Project inside the source file Stubborn Double what exactly happens then?
Extra Question 2: If you cut your film of the timeline to play, then what happens exactly?
Extra Question 3: In what format your movie you are trying to actually export? If you do not already eh an uncompressed AVI tries, then try it! If it works, you at least have a highest quality film results in your hand!
Extra idea: Make time a new, blank timeline and pull your final movie timeline inside there. It will be exactly one video - and an audio track occupied. Now try to export Endfinalkondesatnettostromlinienknappesteinfachtimeline THIS! What happened?
Antwort von drbarbossa:
Thanks for all the help Debonnaire!
I have repeatedly removed and everything synonymous these Clean dingsbumms performed. Then reboot and clean install CS4. Result: Still the same.
QUOTE of thee:
Extra Question 1: If you IM PPCS4 Project inside the source file Stubborn Double what exactly happens then? >> Queldatei I can not change or choose. The fix is in the waiting window. Only the target source, I can modify.
Extra Question 2: If you cut your film of the timeline to play, then what happens exactly? >> Does spitzenmäßig quite normal.
Extra Question 3: In what format your movie you are trying to actually export? If you do not already eh an uncompressed AVI tries, then try it! If it works, you at least have a highest quality film results in your hand! >> PAL-DV mov file.
Extra idea: Make time a new, blank timeline and pull your final movie timeline inside there. It will be exactly one video - and an audio track occupied. Now try to export Endfinalkondesatnettostromlinienknappesteinfachtimeline THIS! What happened? >> Is there a way out. But first, I would still try something else:
On my Mac, I have Parallels 4.0 and then I would like the WinXP version of Premiere Pro CS4 and install the project's data adding. Maybe it runs then. Let's see. If not, I will with the timeline to make.
Sign me asap.
Antwort von drbarbossa:
Also on the WinXP is the same problem.
The idea with the timeline I made synonymous, synonymous there was the same result. Unbhängig how many tracks it has and how the constellation is the encoder returns to the waiting list is always the same error: Source not found, moved or deleted.
I have even after all data are moved where he allegedly studied. Forgiveness. My system is clean of CS3. There must be something else cause a problem.
That is verzweiffeln. Any idea?
Antwort von PowerMac:
(...) Or vice versa: in search of the PP project file in Notepad, the exact path and filename of the embedded, but the wrong source file and then move the desired source file using Windows Explorer s.den benne correct location and file them according to the order included the wrong. (...) It is a Mac. You're very careless for a Swiss.
Antwort von Debonnaire:
(...) Or vice versa: in search of the PP project file in Notepad, the exact path and filename of the embedded, but the wrong source file and then move the desired source file using Windows Explorer s.den benne correct location and file them according to the order included the wrong. (...)
It is a Mac. You're very careless for a Swiss. Does not matter! The principle procedure is the same, Macki! Simply "notepad" and "Windows Explorer" with their counterparts on the Mac, replace and otherwise equal to proceed. The buckle yes maybe even you!
Antwort von PowerMac:
(...) The buckle so maybe even you! Since you seem synonymous to understand, sure;)
Antwort von Debonnaire:
;-) Then we have indeed understood colleague!
Antwort von drbarbossa:
So people, I can not solve the problem. No matter what I did. Since the dog is somewhere inside :-)
Therefore I now have a second MacBook Calculator fetched, then Premiere Pro CS4 drauf loaded (it was not an Adobe program on it) and the Project on the external retrieved. Results: Runs! So I have saved my film. Now I will forever condemn CS4 :-)
So you should absolutely note: IF MAN HAS CS3, CS4, it does not NACHZUFÜGEN. ONLY SOLUTION: COMPLETE SYSTEM MAKE PLATT AND THEN INSTALL CS4. Everything else is nothing. No matter how often you uninstalled CS3 and everything :-) feinsäuberlich cleans CS4 MAG IF IT IS NOT HIS OWN BROTHER IS TOP OR EVEN KNOW ONCE WAS!
I thank all sincerely! You are sharp!
Greetings from Munich,
Dr Barbossa
