Frage von schickilino:
Hello,
I have problems with the recordings of the Panasonic NV GS180.
The following situation:
Treadmill with 2 of your camcorder and a rear of the Page. Lighting of the Page, of the rear and top with a total of 8 x 150Watt emitters, wall color red
During the recording varies the brightness of the image is always as in so slow amplitudes of light to dark and back to hell and back to dark, etc.
Can this be prevented by settings or stabilize?
Over a quick help I would be very grateful.
Regards
Antwort von schickilino:
more input, I do not know whether this is important:
The 3 are camcorder via firewire s.einen PC on which the recordings are stored
Antwort von Blizzard:
First White Balance. Then Iris and shutter speed manual setting. To change the picture are not synonymous. If you are in automatic mode films, then you will have no influence on the Picture. I have even the 180er. Since a few months ago I only filme Manual (White Balance ...), because the image quality of the 3ccds it really exploitation.
Antwort von Blizzard:
Thank you, I will try.
I come into the manual mode, auto, when I change settings and these settings are retained when the power is completely removed?
Sorry am totally newbie in this matter.
White balance tells me something that I have ever seen. Den can be only a yes or off.
What is Iris and should I adjust the shutter speed to make shorter or longer?
Danke schon mal for your efforts a total amateur to help!
Antwort von pezi:
The White Balance is set:
Slider s.LCD tray Manual shall
The joystick-press once on the display should appear something where two arrows left and right point. If this is not the case, the joystick is pressed again.
- If you seek a full white area, the same exposure, as the scene in the movie (just a white sheet in front of the lens hold)
Then you chose on the joystick icon White Balance (to the left or the right joystick)
If the icon appears and you have a white area focused, then you kanst once the joystick upwards. The picture is just black and then white.
That's all (if not working just up the Instructions)
Iris and Co. do you similar to a:
-the switch must remain set to manual
-Then you hit the joystick to the bottom
Three values appear, 1 the shutter speed should be (I will leave it very low-most max.1/150)
-The next one is I think there is the Aperture normalerweiße "Open" (Aperture is wide open) You kanst they only move when the 3rd Value, the iris is at the bottom, ie Picture dark.
Games just look around and how the impact on the Picture. But the most important is the White Balance. You must be a note:
The value of iris (bottom) must always remain selected, so that the camera the picture or not aufhellt Cover
Antwort von schickilino:
Hey super, many thanks for your effort and detailed answer !!!!!
I usually have nothing to do, so I know as zero, but now I'll trial & error with your tips.
Antwort von pezi:
As I said, if does not work just up the instructions. Since there is always much more accurate and synonymous with images
