Infoseite // Processor What is select? For HDV editing



Frage von Heusen:


Hi,

I have two processors in the eyes focus, but I did not really
to know what I should zulesen. I would like HDV can be neatly cut.

- INTEL Pentium D 935 Dual Core Processor (6.4 GHz) - 2x 3GHz)
- Intel Core 2 Duo E6420 (2x 2.13 GHz)

Did her a better tip for small budget?

Thank you

Space


Antwort von JMitch:

Intel Core 2 Duo E6600 ...

Space


Antwort von JMitch:

So to me enough for HDV synonymous of E6400 ...

Space


Antwort von Frank B. als Gast:

Hello,
I stand just before a similar decision. I fluctuate between the dual core E6700 and E 6600. Although processing power in the HDV editing plays a major role, I will probably due to the better price / performance ratio for the E 6600 decision. A good friend who has more idea than me, advised me also. The differences in the calculation period is by far not correspond to the difference in price.

Frank

Space


Antwort von JMitch:

... and editing for HDV range with a suitable NLE a P4-3, 2GHz PC completely unnecessary and geschmeiddig as well as with real-time monitor Vollvorschau s.sekundären editing. A E6600 vergoldet the HDV editing even more ...

Space


Antwort von leroc:

P4 is dead prefer to take core duo!

Space


Antwort von AlexHH:

Hello, I just had an HDV Handycam (HDR-HC7) increased.

Now I would like to know whether I am with my 1.5 years old laptop ne chance of the material to be cut.

Basic information:

Intel ® Centrino ® Duo
Mobile Technology: Intel ® Core !" Duo
Processor T2300 with 1.66 GHz, 667
MHz front side bus, 65 nm and 2 MB
L2 cache

Memory: 1,024 MB
DDR2 RAM (512 + 512 MB, up to
max. 4 GB1 expandable)

ATI Mobility !" Radeon ® X1400 with
128 MB Hyper Memory, 16 x
PCI-Express graphics adapter

Or asked differently: What do I need s.Hardware minimum for a proper post?

Thanks for tips!

Alex

Space


Antwort von catchafire:

Q6600

Space


Antwort von darg:

Hello,

I use for my HDV editing with Vegas Pro 8, a E6850 CPU at 3GHz, with 3GB of RAM @ 1066MHz FSB for the RAM (under WINXP), not 800 or so and if I am still in a transition with small gadgets in it have, like Speed or filter is used in the Forschau lot s.Ruckeln together, ie the frame rate goes down. How can I tell this one then that means it E6600 or less loosely edited? Since it hooks in the preview or render it each time?

Greeting
Axel, San Jose

Space



Space


Antwort von wolfgang:

No, this is not so, Axel. Vegas 8 is synonymous for me with the 3.2 Ghz P4 and 1 GB of Ram only a straight sufficient preview of native HDV2 material - without great filter.

With the Q6600, however, you have much greater power reserves in the preview - not only that native HDV2 material easily runs with 25 fps, but it can be synonymous HDV several tracks in real time easily play. The system goes - although with only 2.4 Ghz switched - much later in the knee than the 3.2 Ghz P4.

http://videotreffpunkt.com/thread.php?postid=78896 # post78896

Explanation? Well apparently, the entire processor architecture much more powerful than a single processor. But since I'm not an expert.

And really striking is the difference then when rendering, where recalculations are necessary - as moves the 4-core processor which Einkernprozessor anyway violently away.

Depends on the way the 4-core processor synonymous the 2-core processors in the same price class - with regard to the preview in Vegas 8 is concerned, as synonymous with the rendering. Some people are of 2-core processors on the Q6600 has converted, and were quite enthusiastic.

Space


Antwort von darg:

Hello Wolfgang,

my CPU and the Q6600 is almost on. I think the two places make the cabbage synonymous not so bold, because the whole field is quite narrow. Unfortunately, not much about the written test, the line you do not know what and how they've tested.
I can imagine but synonymous, that may in the four-core advantage is quite large. When I had bought my calculator were synonymous in the 6600 at the same price, but I startled the poor clocking s.and that he could not be overclocked. Or at least as simple and easy as the 6850th
At the moment I'm using my CPU still virgin and it is synonymous for what I do. Maybe I am still a bit to around to operate. Still am, but their satisfaction with my chest :-)

Gruss

Axel, San Jose

Space


Antwort von wolfgang:

You should review the matter in any case for a specific editing program on standardized tests comparable Render - otherwise you will circle s.so only one corner in a circle.

Among the overclocking capabilities of the Q6600 you can hear different opinions - some say it was good, others think that it would not. I myself am so synonymous not really played, simply because I still have not really needed.

Space


Antwort von baststar:

I've synonymous to Q6600 G0
It runs in my stable at 3.6 Ghz aircooled at + - 65 ° at last!
They have 4GB Ram and XP x64 and you have a good cutting machine

Space


Antwort von leoHDV:

Currently, the Core 2 Duo 6750 favorable to have ...

Space


Antwort von darg:

From 6750 I have not heard much good. The E6850 has much more reserves udn is already standard at 3.0. You can probably without great expense to 3.6 or more drive. I have then make a huge Luftkuehler fetched and the CPU is running at factory settings at 35C at full load and even in summer here in California. So far I have not yet had the necessity to screw him higher, but the times will be at the Asus with the opportunity to make tools. Let's see what goes.
I think it depends on the series of the Q6600 to. If there a the catch, the manufacturing problems had been technically there is not much to do. This can, of course, synonymous with the duo of the case. The come from a different but Fab and are therefore not comparable to the Quad.

Gruss

Axel

Space





slashCAM nutzt Cookies zur Optimierung des Angebots, auch Cookies Dritter. Die Speicherung von Cookies kann in den Browsereinstellungen unterbunden werden. Mehr Informationen erhalten Sie in unserer Datenschutzerklärung. Mehr Infos Verstanden!
RSS Suche YouTube Facebook Twitter slashCAM-Slash