Frage von JOKA011:
I'm new here, and have a question s.The round.
I got in front again in the short videography and me have a HDV camcorder, and MAGIX Video deluxe 15 gained. Leaving aside the fact that stops dubbing the program already in the recordings again and again, and I start the new film has, I have a much bigger problem.
I have compiled a long film about 19min, the individual scenes, partial reduction and change in order. I have several times the Project intermediately. When I then called one days later, the project again, to make tracks and soundtrack, has what is there on the screen, again the state from the beginning, that is uncut in the wrong order.
Anyone know what's going on, I am the verge of a temper tantrum. When I geareitet about 7 years ago with DV and Pinnacle, I knew best, edges problems, but what I saved was synonymous after yet arrived.
Antwort von A380:
Moin moin from Bremen,
You evt any
(; supporting files) that you read from the file name and just like any other extension deleted?
VDL 15 created every 10 minutes to back up the project file.
Attempts to load it under "File" - "load backup" (; or something similar) to.
mfg
William ... The A380
Antwort von JOKA011:
That is what I have been synonymous, I have called the last backup. Also missing here s.Filmanfang various scenes, and the reductions of the other scenes are not present. I have seen through all 10 backups, they seem to all have the same stand. Now I have just tried a different way, I have the missing scenes from the shots and then loaded into Project and then drangehängt the last backup, and merge again after missing the first scenes. They are not just there.
I do not advise me more than doing it all over again to the front of.
mfg
JOKA011
Antwort von Winterbiker:
If you have the files of a chip or hard drive of the camera is pulled directly into the timeline, then Magix found after the reopening of the work file, the movie data is no longer if the chip or the camera is not connected. Is synonymous happened to me once, so this somewhat unqualified answer.
So just check to see if the original movie file (, so everything that you have transferred to the calculator of the camera should) be saved at all yet.
Regards
Winter Bikers
Antwort von gunman:
If you have the files of a chip or hard drive of the camera is pulled directly into the timeline, then Magix found after the reopening of the work file, the movie data is no longer if the chip or the camera is not connected. Is synonymous happened to me once, so this somewhat unqualified answer.
So just check to see if the original movie file (, so everything that you have transferred to the calculator of the camera should) be saved at all yet.
Regards
Winter Bikers </ span>
As I have mitgekriegt that there were shots of a HDV camera, there's really nothing with chips and hard drive, it is directly transferred into the program from the tape via Firewire Editing and Magix store the finished file on the hard drive into the folder you refer to it .
If missing after editing parts of the project, they have probably been deleted. That does not mean that they are deleted from the original recorded file, then everything stays the same.
Magix When loading a project does not find a needed file, then comes a message. Does not this message, and the Project is loaded, the files are still there.
I do not understand why all BAK files are the same?
Gunman
Antwort von JOKA011:
So now I really do not know more next. I've done the whole of the front again, this time not only in HDV to DV anyway because I can spend only on DVD and I watch the whole thing to a "tube". Diesemal and everything went smoothly, I had the whole film, 29min record at a time, he allowed himself to edit without any problems, and the finished synonymous multiple cached Project lost when you save nothing.
It seems more likely have to do with what the data set of HDV too. And even though I have a Intel Core 2 Quad Processor with 2.66 MHz and 2GB memory have. This ought to be synonymous with VISTA are no problems.
Erstmal So I say thank you for your answers, and it would probably leave until further notice for DV to DVD, until I have an idea what was wrong.
mfg
JOKA011
