Frage von Stöpsel:
Irgentwo I have recently read that if I have a stereo jack cable s.das times of RMZ-10 solder, get a stereo sound, even though the microphone is mono.
Is that so?
Antwort von STR:
It inserts a little funny.
I do not believe that the work would
Antwort von Eva Maier:
If you really do best, mono 2 times
Antwort von beiti:
Stereo, it will not, but you can prevent the sound only to the left lane is taken. So the stereo plug ensures that you get the mono sound on both channels and have not only complicated in the post have to distribute. (Most entry-level editing programs that have no function.)
Antwort von Stöpsel:
Thanks for the info!
Has anyone with a soldering connectors such experience?
Antwort von beiti:
Has anyone with a soldering connectors such experience? Yes, but I can not pass over the Internet. ;)
Antwort von Eva Maier:
Lieberv stoppers, because her dad, the
With a little luck and Money can buy an adapter synonymous.
/ eve
Antwort von Bamboo:
Lieberv stoppers, because her dad, the
With a little luck and Money can buy an adapter synonymous.
/ eve I Solder much, but have never been an audio adapter soldered.
Adapters have the disadvantage that there is loose contact.
Antwort von Bamboo:
The question is whether the cable as just purely stuck or need irgentwie polarity must be complicated!
Antwort von beiti:
Jack adapter, I would avoid if possible (and if so, then the connection with the same fabric band together in order to avoid Wobbler).
Most reliable is still the off mono and a stereo plug anzulöten. I am trying to time a Instructions:
The mass (= shielding of the cable) comes s.den shaft of the plug, which is the longest of the three Lötfahnen, synonymous with the bend of Endlaschen serves as a relief.
The positive (= inner conductor of the cable) is on the two smaller Lötfahnen, which the ring and the tip of the plug meet.
(The peak corresponds to the left channel, the ring is the right channel. If, in this case, but cold, because the two are connected anyway.)
Antwort von Stöpsel:
Thanks I will try tomorrow. Otherwise, ask an electrician, I stop
Antwort von Stöpsel:
if someone has a good link, where such instructions are described with pictures, will he please send it.
Thank you!
Antwort von Markus:
... if I have a stereo jack cable s.das times of RMZ-10 solder, get a stereo sound, even though the microphone is mono. This is not true. So what do you want then the times changed? If your camcorder is not on both channels (in mono) on? If not, you have no way to set the soundtrack for the post to duplicate?
Related topic:
The RMZ-10, I had many years in the synonymous use ...
Antwort von beiti:
So what do you want then the times changed? If your camcorder is not on both channels (in mono) on? If not, you have no way to set the soundtrack for the post to duplicate? Very few of mono camcorder recognize themselves and take on both channels on, for all other needs, the trick with stereo or stereo adapter plug.
If you frequently use the mono, is the change in the plug but a hundred times easier than any film in the re-post the right channel to fill them.
The only technical drawback is, incidentally, that the sound through the distribution channels to 2 to 3 dB quieter. But in practice no preference or will of the Aussteuerungsautomatik balanced.
Antwort von Stöpsel:
Then I with the soldering try
Again thank you for your answers
