Infoseite // SVCD Despite very poor image quality on TV screen

Frage von marcel-hbs:


Hi,
I have a problem with the screen output (Television 4:3) of my self-video films.
It is your camcorder recordings, which have Pinnacle Studio 9 is processed. The mpg format is directly compatible SVCD from the original format. Avi created.
This continuous burn with Nero Burning Rom (version 6.6.0.16) as a SVCD on a CD-R and out comes a total gross verpixeltes television screen.
I have tried out and her (since December last year as a Christmas gift I wanted to create), but I do not get sharper images out. When I see the images directly from your camcorder to the TV games, I get a completely normal, razor sharp picture.
Where and why does the time being, very good image quality lost?

Many DFank for your help,
Marcel



Antwort von Stefan:

Somewhere must be the quality that yes, if you are 3.6 MByte / s (DV Camera) at about 2800 kbit / s (SVCD) runterprügelst ;-)

DVD Burner and DVD blanks are now affordable. Keep up to speed with no more to SVCD. It is a pity for the time invested.

Good luck
The thick Stefan



Antwort von marcel-hbs:

Hi Stefan,
DVD Burners and blanks are synonymous, but nevertheless, I have a better quality when shooting (90 min) seen as my videos are only a half hour long. I would simply like to know why this is so.
The award may be stupid, but it still went "before" synonymous. (synonymous because when we still had Kaiser :-)

Many greetings,
Marcel



Antwort von Parafuso83:

Hi Marcel

Aller Wahrscheinichkeit after the encoder is not the best. Otherwise, the setting times verify variable data rate, etc.
Good encoder for SVCD is among others the TMPEG - slow but good.
Also to recommend and MainConcept Pro Coder Express - but somewhat expensive.
At the time I used the TMPEG, but as I said before, DVD, s are cheap and there is quality content but also better than 2 / 3 Pal-talk SVCD.

Bodo



Antwort von Videobearbeitung:

Hello
the contribution of Bodo, I can only agree. I use Procoder Express with success.
"In the past," I started synonymous with SVHS. At the present quality of the DVD Comparison no more.
Wasting your time not long ago with outdated.

Gruß Klaus



Antwort von marcel-hbs:

Hi Klaus, Hi Bodo,

I'm your Council and have now followed a test DVD. Unfortunately, the material is exactly the same poor quality, as is already the case in the SVCD was the case. There was no noticeable improvement.
So the problem is still elsewhere. Could it perhaps be that the quality already during the transfer to the computer (via USB-Stream) is extremely down? If so why and how can I prevent this?

Thank you very much,
Marcel



Antwort von Bernd E.:

"marcel-HBS wrote: Could it perhaps be that the quality already during the transfer to the computer (via USB-Stream) is extremely down? If you do not have the handful of camcorder, the USB full quality output, this is probably a cause for your poor quality. For the USB stream is usually the Resolutiondrastisch reduced. A glance at the instructions as determined brings clarity.

"marcel-HBS wrote: how can I prevent this? Transfer data via Firewire as a DV-AVI on the PC and change it only in order to MPEG2, when the film is finished.

Gruß Bernd E.



Antwort von Chris182:

Hallöschen of Hochrhein.
Su isse, s! Use as said the said output, as is always the full quality. Need a little more stop Speier place - about 13 GB for 1 hour Avi. Then of encoder to convert to Mpeg 2 and have the satisfaction of returning back. Have fun.
Bodo



Antwort von marcel-hbs:

Hello Bernd,

Instructions for the Camera unfortunately does not provide information on the transmission qualities. The data cover the dubbed Imme but about 1-2GB for a 5-10-minute film. Due to this size but I believe that is the picture quality is good, right?
How does the transfer via firewire? Is it just a different interface, or do I need a special card to have?

Gruß,
Marcel






Antwort von Bernd E.:

"marcel-HBS wrote: Instructions for Camera unfortunately does not shed Which camera is it?

"marcel-HBS wrote: Is it just a different interface, or do I need a special card to have? Firewire is basically just an interface such as USB. A special card to retrofit for a few euros you need only if your PC is no Firewire port.

Gruß Bernd E.



Antwort von marcel-hbs:

Hello again,

My Camera is a SonyDCR-HC17E.

Marcel



Antwort von Bernd E.:

"marcel-HBS wrote: SonyDCR-HC17E
Then vote your guess! For keyword iLink cable (so-called Firewire with Sony) is so in its instructions: "image data with higher quality than with a USB cable."

Gruß Bernd E.