Frage von Frank27:
Hello,
I try my PC has long been with the satellite to connect to s.PC television and listen to radio.
I have already done the old video adapter card s.die TV and movies on the PC to get.
But these settings are synonymous, I think not.
My device manager shows me a Philips TV Card in 1734 (correct)
I have an older receiver (Skymaster XL120).
I have SCART to RCA adapter with in / out (on out) the Glebe connector (video, if I was correct) s.die TV card (VIDEO IN) and the red and the white s.per adapter (2 -- -> 1) s.den sound input hanged.
The aerial cable, I still synonymous connected.
Strangely, I hear the sound of each channel, but I come s.kein Picture, geschweigedenn VT.
As the program was in the TV card VTR Easylite.
In the settings appear strangely not on the TVKarte (Settings: TVCard Device: there is nothing!)
Maybe someone can help me. I get it even with the trial & error is not in the grip
Danke schon mal.
Frank
Antwort von Hollgo:
To take a picture on the TV card to get your PC, it must have a video input (video - In).
Because of an antenna you are talking about cable, it is probably your TV card to an analog model act.
Most uses one with a video - In interface-equipped graphics card.
Not to be confused with video - Out, which have (almost) all analog TV cards synonymous.
Since satellite receivers do not have RF modulator, you'll synonymous over the "antenna cable" (this is a satellite cable?) Is not synonymous Picture on the TV card get this connection is not technically make sense and can even damage the TV card, if you have bad luck.
The only reasonable solution is the combination of the above you already mentioned SCART RCA adapter (OUT position), of which you have the SCART output of the receiver the white and red port s.den line-in of the soundcard of the PC to connect (adapter cable -3.5 RCA "jack) and the yellow video connection with the video line in the graphics card connected.
In the graphics card driver, you should now enable the input.
The program VirtualDub is synonymous with fine TV cards and video card connectors from.
Since your TV card in a video, should be an appropriate setting in your TV viewer program possible.
Antwort von Frank27:
Hello,
ever grateful for the info,
I've tried it, but it works with my program still does not. I now try it with Virtual Dub.
Frank
