Frage von Rudi_x:
Hi,
I have a problem with my SonyDCR-PC9E.
Recently the works for loading the cassettes are no longer.
The "drawer" is no longer a lock, and will no longer auto
recovered. Manual does not, I can not tape
more purely do let alone the big door closed.
Otherwise, the camcorder works flawlessly.
What this problem is maybe just a bit somewhere
jammed? Or can I forget the thing?
Here is a picture of the camcorder, the red arrow to show
which part is no longer snaps below.
http://www.pictransfer.de/?img=DCRPC9Esmall6fce6eceJPG.jpg
I hope the URL works, if not:
http://pictransfer.de/uploads/DCRPC9Esmall6fce6eceJPG.jpg
Thank you in advance in advance,
Rudi
Antwort von Blackeagle123:
Hey,
ähmliches a problem I had Panasonic s.meiner Camera: There also a flashing display. All in all, should have condensation. (Perhaps that is synonymous with Thee the case? -> Camera open 1-2 days, then it must go back.)
For me it was a problem s.der Technology, an electronics part was exchanged for 350 ¬ and the Kasettenlaufwerk cleaned.
I write "similar" because I have the cassette deck is engaged. I do not know whether the Einrastemechanismus electronical works with you, but perhaps that is a part synonymous canceled. That yes, you can check times carefully.
Build in any case, the camera apart or do anything else on it, one of the sensitive parts may be damaged. You must s.Ende probably go to a dealer. Ask your online where Sonyin close and bring your camera there. Perhaps your video dealer synonymous dir (without the "cost estimate" of ¬ 30-50) to help you.
Many dear greetings
Constantin
PS: Please do not forget that the solution to your problem to write.
Antwort von Rudi_x:
Hi,
I do not think it what to do with condensation has
The camera is now open some time around.
The characteristic "click" into place when the
Cassette decks, and just missing out normally
triggered electronic collection of the part is not triggered.
All in all I think what it is mechanical.
It can of course be something abegebrochen is, but funny
there is the problem first occurred sporadically, ie it has
only sometimes does not work. Now it is constant.
Possibly. what bent?
Since there are so many small parts, because I do not trust ran.
My hope was that perhaps a "disease" of these
Camera is for there is a solution.
More than 50 ¬ but I would no longer be stuck in the camera ...
Next hoping
Rudi
Antwort von Markus:
More than 50 ¬ but I would no longer be stuck in the camera ... Then comes the expert probably no longer in question. If something should be aborted, it should in any case, significantly more than 50 ¬.
Antwort von Blackeagle123:
Hey Rudi,
if the problem has been solved, I would be very interested in the solution.
Have you the expert? Or did you even give anything to repair?
Many greetings
Constantin
