Frage von flydavos:Have now tried in vain using a helmet camera AV-in with the DCR-TRV50E to connect.
The camcorder is on the list of supported devices. Who can give me a tip?
Antwort von cutaway:
Hello,
maybe I can help you. I use the TRV 30th In the manual states: the Settings menu:
A / V DVout: on (The camcorder converts analog signals into digital Picture-/Tonzuspielsignale around and gives them out)
Good luck wishes
cutaway
Antwort von Bernd E.:
Who can give me a tip? What exactly does it not? Seest thou not already the helmet camera Picture in the TRV50 or is it just not to tape record? And did you like the approach described in the manual?
Gruß Bernd E.
Antwort von flydavos:
It is so that I have no picture of the helmet camera can be displayed. In the manual, I have nothing about the connection of an external camera found.
Did I miss something?
Antwort von Bernd E.:
... In the manual, I have nothing about the connection of an external camera found ... On the specific issue helmet camera as synonymous, there is no info, but the approach to the recording of an analog device is described in any case.
Gruß Bernd E.
Antwort von kurt95:
Who can give me a tip?
http://www.docs.sony.com/release/DCRTRV50.PDF
p. 196
Gruss
ph
Antwort von Bernd E.:
Who can give me a tip? ... S. 196th .. A Tip for what? On this page is described how the TRV50 as an A / D converter can be used, but what did you question this? If it comes to the helmet cam go anyway would rather be considered p.100.
Gruß Bernd E.
Antwort von websmoker:
have the same problehm.
TRV-50 has a yellow connection .... but do not know whether I use the If.
Or ..?
I do not have a standard sony cable, but a self wolter make.
Do I dan a stereo or mono benustzen?
and how do I do this?
gruss aus amsterdam
yes ... we read everything here with .... lach
gruusse
Karel
Antwort von Markus:
TRV-50 has a yellow connection .... but do not know whether I use the If. The yellow connector is for video signals (composite = composite). If your source image such a signal, you can do it via the video input to the camcorder playing.
Do I dan a stereo or mono benustzen? What do you mean? The AV connection s.Camcorders? This is a 4-pole 3.5 mm jack for combining video and stereo audio.
zum Bild Even solder but Fuddelarbeit. I would like the cable is ready to trade care.
Edit / Cross Link:
Antwort von websmoker:
Hi Markus,
That is exactly what I did ... have tried several. (jvc has something synonymous).
I then use the yellow and the two others did not.
I have no gluck until now ... and like a wolter yourself.
I have the plug already here, and I think that only 1 coax annschlus last.
One is basic / ground and one is for mono-focal.
Karel
Antwort von websmoker:
still no idea. Kunte it anywhere in his menu to find?
Have online sony manual / instructions read, but ..... it is nog always gray. The cam is a U.S. version, but this makes it niks?
Antwort von websmoker:
Markus,
problehm have found.
This camera is NTSC .... my bullitcam is Pal.
Others of NTSC to PAL, I have not yet found. Weis is not synonymous if the possible is.
Idea?
Gruss,
karel
Antwort von Markus:
This camera is NTSC .... my bullitcam is Pal. That does not fit together. Either you need a Bullet Cam, an NTSC signal or a recording device, the PAL video processing.
The possibility of a standard transformer zwischenzuschalten, I would find out the financial, practical and qualitative reasons uninteresting.
Antwort von websmoker:
Yes .... true.
I buy an extra bulletcam, dan kan I use both.
Thanks for all reply
Gruss
Karel