Frage von Kabakiffer:
Hi,
the following problem:
I have now a HDM - DVID cable purchased (60 euro !!!!). Now I just want fun try the camera directly s.meinen 22zoll TFT connection. However, when the TFT only 720p, so no HDV. The same was s.TFT of my father.
If I were in my FX7 on "Check Status" button, it shows me synonymous to that via HDMI only 720 x 576 output.
At what is now? On HDMI - DVI cable, or s.der Camera s.den screens?
An HD television for you to test, unfortunately I have not.
I would be very glad if someone can help me:)
Greeting Kaba
Antwort von WoWu:
@ Kaba
HDMI is a protocol-driven interface, but not act on its own can interpolate.
So from a 1080i suddenly a 720p, it would probably something that you could submit to the Nobel Prize.
But Seriously ... are you sure that you do not have recorded in 720p? Because .... HDV 720p
is. The problem is also with great probability in the setting of your monitor or recording. (Possibly only SD compatible)
If, however, arrive 720x576, then she just changed the PAL signal from the HDMI, because of no HD Television can.
Antwort von Bernd E.:
... are you sure that you do not have recorded in 720p? ... In the FX7 can be very sure of: It is a 1080i camcorder.
Gruß Bernd E.
Antwort von WoWu:
Then I do not know what he writes of 720p. Probably thinks he is 720p but not 576i, so probably not the Television higher resolution ...
... or as I said: Nobel ...
Thanks Bernd ..
Antwort von markus1701:
He says the 720 of 720x576. This is 576i.
Antwort von WoWu:
Jau, which will be, then I would s.Television schau'n times.
But 60 euros for the connecting piece is synonymous call a fierce price.
Antwort von tobi1977:
I do me, you've got the wrong cam and see 2 options:
1. Your Cam has a DV instead of HDV signal (check the menu item "ON / OFF REC" - when recording HDV 1080i format should stand and 4 points below next to "i.Link Conv" should be "Off" stand)
2. You searched HDV recorded, but in your Cam DV to the Downkonvert activated (check the menu item "ON / OFF REC" in VCR HDV / DV to HDV and at "i.Link Conv" should be "Off" stand)
If you now with these settings, some films should be synonymous on the LCD / Plasma HD signal arrive.
Incidentally, the 720p Cam not - that would be 576i
Antwort von tobi1977:
Hi, thanks for the answers!
Well, I briefly explain my problem again:
Since I have garkeinen HD Television, I have the camera on the HDMI DVI cable directly s.einen 22zoll tft computer monitor angestöpselt.
The recorded material is of course everything HDV1080i. Also i.Link Conv is set to "Off." And I think that the i.LINK CONV only the firewire output is concerned?
And if I get the recorded material s.TFT monitor watch, stands for "check status" s.der Camera verbatim:
HDMI output: 720 x 576p
Also, the TFT monitor (of Samsung and LG) tell me that a digital signal with 720x576 pixels or tribunal. Whether p or i do not show the monitor to. However, I do not ekenne line shift or the like.
Antwort von tobi1977:
That can not be. I've synonymous the FX7 s.einen 22 inches TFT connected via HDMI and when I come out of 1080i, because the FX7 can not
720x 576p.
Antwort von Meggs:
I am with the FX7 does not specifically, but generally it is so:
The camcorder can be recorded in 1080i signal as well as 1080i as synonymous as 576i output. This can be either s.Camcorders setting (somewhere in the menu), or the camcorder is the mode with the playback device. In the latter case, it sometimes to such problems. The camcorder is of the opinion that the connected monitor only supports SD and SD are therefore made. So an incompatibility between your camcorder and playback device.
I would nomal in the Manual of the FX7 and the menu to see if somewhere is not the Wiedergabeäuflösung adjust it.
Antwort von tobi1977:
zum Bild zum Bild Here's 2 pictures, so ihrs can see myself:)
Antwort von WoWu:
or the camcorder is the mode with the playback device. Megger has already written.
For me at the moment looks as if the monitor on the HDMI output is not set to "auto" is but on SD (see Picture 1).
The rest is signaling that the "wrong attitude" that the monitor is also the p s.die camera signal is clear, because a bit is that the monitor uses.
What is there when you pull the HDMI connection? Afterward, the entire information actually disappear ...!?
But such times the correct setting in the monitor menu ...
Antwort von Kabakif:
@ Wowo: Jo the info disappears when I use the HDMI cable rausziehe.
On both monitors until now, I can find no setting to higher Resolutionhinzubekommen ne.
22zoll to the LG monitor I have time to test my Aldi DVD player. When can I choose whether to 720p 1080i or 1080p output. At 720p, I had a super picture on the monitor. Once I get to 1080i or 1080p've made, the screen has an "Out of Range" message and the rest remained black Picture. Can s.den screens, that is to say that the 1080i does not understand?
Hab incidentally the Samsung SyncMaster 226BW, the name of LG screen I have to look after -
Antwort von Quadruplex:
On both monitors until now, I can find no setting to higher Resolutionhinzubekommen ne. This could be due to that it can not. To HDV correctly, you need to leave a screen in 16:9 format with a physical resolution (ie number of pixels) times 1080th of 1920 Your Samsung is 16:10 (which would not be a problem), but only 1680 x 1050 pixels - langt not. I guess the LG, it is similar. And unlike goggle can most PC monitors do not runterskalieren, log s.den camcorder correctly so that they are with the HDV resolution are not clear.
When it comes to you just to test what your camcorder can clamp it to you lower arm and the next frag greed-is-stupid-market, if you's can try ...
Antwort von carlo:
A 22 "monitor is always in the 1680 Pixel Width - so HDV can not be displayed, which is only p.23"
Antwort von Bernd E.:
... A 22 "monitor is always in the 1680 Pixel Width ... 22 "monitors, there are some manufacturers of already synonymous with 1920 pixels, however, are not exactly the cheapest representatives of their size.
Gruß Bernd E.
