Frage von Markus:
Hi,
I had the last few days with a V1 in live operation to be done. HD (V) was in conjunction with SD cameras are not asked, so the V1 SY / C Output to SD Downconvert 4:3 was switched.
During the production we were a few inconsistencies that I would like to discuss here times. Maybe someone knows a thing or two problems and has already found a solution.
1. The camcorder turns off sometimes (not always) after 5 minutes in a battery farm. The former causes (Battery, Lancsteuerung, tape filed the video off) was inconclusive. The error was in the studio failed to provide.
2. The Lancsteuerung (Manfrotto), with all the other Sony camcorders to work properly, requires s.der V1 maximum fine of cameraman. If you press the zoom lever a bit too far, then suddenly shoots off the zoom, without the usual (mid-) to speed. In the course on is crap.
3. At the Height of the 4:3-image (= bottom of the screen), the Action Area and is displayed in the Width (connectable = frame), it is the underscan. This was initially an ongoing communication between the cinematographer and Directing needed before we can break the problem was solved with Gaffatape. A permanent solution but it should not be.
Currently we have more of a defect, especially the points 1 and 2 on.
Antwort von Klausi2000:
Problem 1 is me with the FX7 has not happened.
LANC, I have not yet in use, can therefore say nothing.
And not because the FX7 has einblendbaren 4:3 frame, so I can not say anything.
However, I imagine the question why the viewfinders are not showing the whole picture, but the Action Area. On Röhrenfernsehern may indeed be interesting, but most projectors and flat panel display the Picture really completely stop s.and it is problematic when one has s.Rand disturbing details that can not be seen in the Viewfinder. To me, I have some scenes synonymous versaut: (
Antwort von Jan:
Hello,
I filme synonymous only with FX 7th
Point 1, I had never been.
Manfrotto Remote Control, I had previously only used s.der PD 170, not yet s.der HDR FX 7th
Sonyhat definitely a new kind endeckt, as now, the lenses will be pushed / other engines. For VX 2100 / PD 170 ne always takes time to the zoom start, annoying me, so I zoom with the Zoomwippe or if present then with of Manfrotto 523 Pro.
The HDR FX 7 prefer the front, I used the zoom, which is described as very direct, not like PD 170 with time delay.
I can imagine that it is synonymous with the remote control by changing the focal length adjustment, this reacts differently. I have the time to test, I think not s.einen defect.
Sagt mal grad because we are on topic, the Overscanbereich is permanently on my nerves. Rec permanently mark on the forehead of the ones filmed ever before to estimate so I really wanted the picture on the PC then hab ... Is there not some point the cameras bring it 100% (as expensive) or do I have a monitor rumschleppen?
VG
Jan
Antwort von Markus:
[Manfrotto 523 pro] For VX 2100 / PD 170 ne always takes time to zoom anspringt ... That I could not watch again, because the zoom is running flawlessly.
... or do I have a monitor rumschleppen? That would be at least a reasonable possibility, especially in organized shoots. However, the overscan nothing to do with the fact that flashes in the picture can be seen. The latter you can switch off (button "Display").
Antwort von Jan:
No. I meant the small excerpt I must take to s.Ende
is actually the beginning of picture desired to obtain.
To zoom, my friend - synonymous cameraman of occupation - but has the same impression of the PD 170, rotating times ahead s.Zoom who somehow always has a small reflection at FX 7 / V 1 of the runs now.
VG
Jan
Antwort von Markus:
No. I meant the small excerpt I must take to actually s.Ende outset of Picture desired to obtain. This is the Safety Action Area, that is less than the underscan. There is the 10% rule, but Television have some very different variations. How exactly you can not work and needs a lot of leeway into account, with no preference whether the display or video monitor.
... rotating times ahead s.Zoom who somehow always has a little reflection ... Oh, because I never turn. Otherwise I would have umgreifen and as evenly as on the synonymous HKB would not. ;-)
Antwort von Jan:
The delay is only noticeable s.Zoomring front - I thought.
VG
Jan
Antwort von volki:
I use the V1E with DR-60, but is synonymous new, little experience
1. The camcorder turns off sometimes (not always) after 5 minutes in a battery farm. The former causes (Battery, Lancsteuerung, tape filed the video off) was inconclusive. The error was in the studio failed to provide.
Without the tape turns camcorder does not matter if it s.mitgelieferten power supply depends.
(Beware of some microphones, for EMI, "hum", possibly powered 230V / 12V Charger with 12V use)
2. The Lancsteuerung (Manfrotto), with all the other Sony camcorders to work properly, requires s.der V1 maximum fine of cameraman. If you press the zoom lever a bit too far, then suddenly shoots off the zoom, without the usual (mid-) to speed. In the course on is crap.
Seems a "Mafrotto problem" to be synonymous U.S. User Maecker there.
With VariZoom VZ Pro-L (http://www.varizoom.com/products/controls/vzprol.html
all work, much wider function properly.
As s.VX-1000 and PD-150, synonymous s.der V1E
3. At the Height of the 4:3-image (= bottom of the screen), the Action Area and is displayed in the Width (connectable = frame), it is the underscan. This was initially an ongoing communication between the cinematographer and Directing needed before we can break the problem was solved with Gaffatape. A permanent solution but it should not be.
Is incomprehensible to me, because I do not understand what exactly is meant.
But suggests to "AllScan 'out, huh?
This menu item in the V1 one has to carefully study and try
volki
Antwort von Markus:
Cross-reference:
