Frage von rikki:
Hallo ihr Lieben! Bin Neuanfängerin absolute and have a problem with the sound. 100% is set, that would be according to the description of the normal volume. I hear when playing the sound but only very softly, synonymous when I turn up full volume, what do I do wrong? Lg. Rikki
Antwort von Bernd E.:
... 100% is set, that would be according to the description of the normal volume. To what device is it?
Gruß Bernd E.
Antwort von Login_vergessen:
... yes and
what is 100% (Huh?) set? The recording level or the playback volume ...??? (From what always synonymous).
Antwort von rikki:
When I press F1 is because that 100% of the volume are as recorded. 100% is set and it is but little heard. During the recording I hear the usual loud sound, after s.Film Save the Sound is almost gone.
Antwort von Bernd E.:
To what device is it? ... From what always synonymous ... All good things are probably three ;-) Any help is futile attempt, as long as you do not tell us, of which software or which player or what ever you synonymous ever speak.
Gruß Bernd E.
Antwort von PowerMac:
What are you doing what and when and where you realize what a problem is and how it expresses? How are you going to put what to achieve?
Antwort von rikki:
It is the program Ulead Video Studio and I want music in the film
Antwort von rikki:
my ignorance, please forgive me ... forgive limitless!
Antwort von Rikki:
I go to music, insert the CD, then press record on Music. I hear the normal volume, the sound is recorded and stored after the sound is almost gone. And I do not know where he hinverkrümelt :-)
Antwort von Nightfly!:
Either you try to have an external speaker to your Micro incorporated, or the recording level is very low.
You watch in the Control Panel Sound and Audio Devices "s.hier synonymous" Advanced ... " device volume.
Under "Options" and here, "properties" you will find percentages on playback and recording.
Gruß,
Nightfly!
Antwort von Rene K:
your playback volume seems loud enough to be set. look under the audio properties of your pc under - properties - receptive to whether the recording controller synonymous all are asked to loud.
Otherwise, just set anything in the program.
Antwort von rikki:
The controllers are all on loud (top), but I hear almost no music from the store.
Thank you for your efforts, lg Rikki
Antwort von robbie:
I think here we have run into a dead end ...
We should first clarify the basics before we can solve your problem.
Describe it please your desired times exactly worlflow. You've written:
I go to music, insert the CD, then press record on Music. I hear the normal volume, the sound is recorded and stored after the sound is almost gone. I know your program does not, but I think that here the fault lies.
You want the music, which plays the PC, with same host PC. This is normally to be any cable connected to either internal or external. That is when you are likely not the case, and the soft music, you still hear, coming from the crosstalk of the signals of a cheap sound card ...
At best you try the following: You make yourself clever, like you Music of a CD rip it. This save you the analog problems and techniques, and did everything filebasiert where not much can go wrong ....
