Frage von kili:
Hi,
at ebay there are around 10 euro ne hv30 lens hood for the ... I was now in a photo shop where I have been advised, the original panel to take, because otherwise the danger that the building would be reduced (black authorities to acquire).
what do you this? This panel is not already big enough?
(ebay: "hv30 lens hood)
grüße:
kilian
Antwort von tommyb:
In fact, the Aperture of a third manufacturer to so-called image vignetting s.den leading edges (black points in the corners).
The longer such a lens hood is and ever weitwinkliger the camera, the more likely it is. As such consumer usually limited Wide Angleverfügen, the angular aperture at Ebay quite optimal.
Whether it really is inappropriate for the camera or whether you like your friendly seller a disservice untying wanted, you even find.
Alternatively, do you do a drawing in accordance with the length of the lens hood, the size of the chip and the whole intervals: D
Antwort von tillbaer:
Uh, Kilian, it would not be bad if you put your questions a little "gathering" could. This makes the answer easier. For this and other topics, there is your way, using the search all the answers already several times!
What you now think of ebay, I do not know. I have of my enjoyyourcamera on amazon. The first is cheap, reliable and, secondly, thirdly, only with very low postage documented. In addition, the book directly from Amazon, so you must not transfer.
Da gibts synonymous UV and Graufilter. To Soundcheck thread: thomann supplies in this price range anyway postage.
Greetings - Til.
Antwort von Bruno Peter:
I use the hood "hama hood rectangle M49" they stuck very well and lose on the outer ring of the lens Canon Camera. For real-time AF sensor I have a small opening in the Sonennblende eingefräst. Moreover, I can at the same time in the thread of the lens used, did s.zwei Make the sun a bit with a cutter nachgearbeitet. The sun visor mounting is mounting of the filter in my case decoupled.
Antwort von kili:
This quickly enables gripping ring then synonymous, hood and uv filter at the same time to use gelle?
and otherwise it is not possible when the UV filter itself has no thread?
grüße:
kilian
Antwort von kili:
hochpush again ...
prefer to hide anclippen ne?
grüße:
kilian
