Infoseite // VHS to DVD via TV card - "Picture warped"

Frage von Shotokan:


404ERR



Antwort von Quadruplex:

"Shotokan" wrote: Therefore my question times s.die professionals what might be going on.
Simple home video have no electronic time base correction - means: The Picture jitters. The antenna input is expecting a TV card but a stable signal. (S.Fernsehern Previously, there was even a special program space - usually the last or the location 0 - which is also somewhat more tolerant in terms of time base error was.)
Apart from that the quality of the detour via the antenna suffers anyway: either the AV input of your TV card to use - if they did. Or an intelligent Grabberbox buy.
-> Search



Antwort von Quadruplex:

And, dear Admin, the previous contribution equal to erase ...
Thank you!



Antwort von Shotokan:

Hi Quadruplex,

many thanks for the information. If the Picture Scat or over then follow the "cable clutter" Yes, there is then this "time correction" then ok?

I understand of such things is not much, but it wants to learn. Even if I never become the "big ones" in the industry will.

And what should the Admin delete - my contribution?



Antwort von Quadruplex:

"Shotokan" wrote: If the Picture Scat or over then follow the "cable clutter" Yes, there is then this "time correction" then ok?
In Profigerätschäften they would not. At the AV inputs are TV cards grief but accustomed to say, home video equipment without time base correction. So is everything in the green area.

Your Kabelverhau as such is no problem (in any case much less than the detour via antenna), but what have you there for a Tonproblem with your adapters? So, as you sign it, only to override anything infernally. Did you look at the drivers of the soundcard compatriots, because if you have any Gain? Or accidentally in the micro-jack input ambitious?
"Shotokan" wrote: I understand of such things is not much, but it wants to learn. Even if I never become the "big ones" in the industry will.
No problem - we all have times small.
"Shotokan" wrote: And what should the Admin delete - my contribution?
No - this was advertising garbage - has been erased.



Antwort von prem:

Hello Quadruplex,

Thank you for further explanations.

Image Technically I think I now understand the essentials.

Technically sound:
I have looked through my settings - but this can not detect errors (which does not mean that I do not * gg *). I have the sound drivers installed and nothing changed since. When I then with the TV card has started to sound a bit overdriven, which I could with the help of a friend clarified. I have the volume level for line-in rather low starting point (for my taste, I thought that would be too low - almost at the bottom s.Regler, but it worked. You hear what * gg *, but it sounds ebend clean).

For a standard TV recording is synonymous in this setting is fine. It is stereo recording.

I am now of the video (via Scat) in stereo - there is called a problem. The soundtrack contains only garbage, the other the rest I go to Mono - is the "fixed" (or so reduced that it is no longer noticeable). I guess so - that there is something with the "cable clutter" has to do - otherwise I would have the same problem but for normal TV-program (via antenna) have.

I guess now that the VHS only mono can play - and when I forced the PC to stereo (and the cables are all synonymous to "Stereo" are) - then the noise (for lack of signal) is generated. That is not so bad bad, I suppose then "halt" in mono on. But understand, I do not. If I knew where the problem lies, I could synonymous other cables or other turnouts provide - it should not fail.

From Skat goes out: Skatweiche distributed to stereo RCA. The two stereo RCA going into a stereo then the resulting turnout than 3.5 stereo jack makes. This goes into the TV card. From the TV card does it all again s.die sound - also with the 3.5 stereo jack.

I know this sounds complicated - and so was looking at it from synonymous if the cables go under ...



Antwort von Markus:

"An unnamed guest wrote: I guess now that the VHS only mono can play ...
Standard query: What does the manual, which the Sound VHS recorder is recording? Hi-fi stereo or longitudinal track in mono, or for older devices, possibly synonymous stereo?

But how was the synonymous should s.beiden audio outputs of the Scart connector an audio signal. In stereo, it would be different signals, at the same mono twice.

"The same guest wrote: ... and if I forced the PC to stereo (and the cables are all synonymous to "Stereo" are) - then the noise (for lack of signal) is generated.
I can not imagine, because the sound s.PC not auto, but manual is ausgesteuert. I rather suspect that some of the cable connections are not properly seated. - Can you do that (for example, with a head phones) durchprüfen times?



Antwort von Videostudio:

Hello,

somehow it burns me with such audio stuff under the nails: Headphones With a test would be a good option.

But why go with the audio-only jack on the TV card? For antenna, it is clear that the tuner is only the audio signal (like a radio receiver) must demodulate. Put the jack cable times directly into the soundcard.

If not hinhaut: Draw a Toneditor times with only audio on and check the result. If is also negative: Clasp times a walkman or MP3 player via a jack-jack cable s.den Line-In s.and draw with a Toneditor on. If errors still occur, you should perhaps look for a new sound around.

Good luck
A lex