Frage von Katja01:
Hello,
Although I have seen many posts relating to Video 8 read, but unfortunately still no info about my problem.
I have my old Video 8 camcorder of Sony (CCD-F455E Pal) using composite s.meinen PC. The camcorder I have a video and an audio output s.PC and I have a video and audio L + R. The picture I get beautifully displayed, but unfortunately the sound is missing completely.
I have the video on Pinnacle Studio 9 and synonymous on the ATI TV software and viewed synonymous made several test recordings to check whether or not then maybe the sound is heard. And of course I have my boxes synonymous and the volume reviewed, everything is connected .... The camcorder / cable / video tape itself may not be synonymous, since I consider it safe for skin synonymous times (with the same cables) s.meinen TV, since funzt everything wonderful.
Has anyone of you perhaps an idea what else I could check?
Thank you very much
Katja
Antwort von RickyMartini:
The sound will probably be on the sound card LineIn received. It is likely that this input is not enabled in Windows (being dumb old) or not selected in Pinnacle.
Go therefore again the audio section of the PCs through.
Antwort von Katja01:
Thank you for the quick reply.
I have the volume controls for recording and Wiederhabe reviewed and both line-in is activated and synonymous to a reasonable volume. Also in Studio 9, I could at extra audio line-in selected, according to the Recording've still no sound.
Many greetings
Katja
Antwort von timmeyy:
Do you have the "Select" checkbox under Line set?
Greeting
Tim
Antwort von Katja01:
Yes and I have been synonymous all other methods tested .....
Antwort von Katja01:
That is the way, my composite input from s.PC (ATI All in Wonder Radeon 9000), perhaps it's what helps:
http://www.sharkyextreme.com/img/2002/04/aiw_8500/aiw_radeon8500_card.jpg
Antwort von shipoffools:
Since you probably do not need the line-select input, but possibly "AUX" or "stereo".
Greeting
shipoffools
Antwort von RickyMartini:
That is the way, my composite input from s.PC (ATI All in Wonder Radeon 9000), perhaps it's what helps:
http://www.sharkyextreme.com/img/2002/04/aiw_8500/aiw_radeon8500_card.jpg Then the sound through the box with the picture taken together.
Antwort von Katja01:
Then the sound through the box with the picture taken together. And that means now for me?
In pure desperation, I have a RCA jack Male s.den camcorder connected (in the RCA camcorder - plug in a PC with "audio in"). Now sometimes I get a sound. After the recording is, however, by a good bit worse than if I just watch on the PC. Is this the solution?
Antwort von RickyMartini:
Then the sound through the box with the picture taken together.
And that means now for me?
In pure desperation, I have a RCA jack Male s.den camcorder connected (in the RCA camcorder - plug in a PC with "audio in"). Now sometimes I get a sound. After the recording is, however, by a good bit worse than if I just watch on the PC. Is this the solution? You need the outputs of the camcorder with the inputs connect this box to enable Picture and Sound of the Ati card together and transfer can be recorded.
The sound quality should be synonymous still can be adjusted.
Antwort von Katja01:
I have already s.gemacht of beginning, unfortunately only works with the sound does not stop (because you can not really do much wrong, yellow is for video and white and red for audio). Moreover, the various recording possibilities Choice (Stereo Mix, Aux, Line-in ....) I have every tested, but no success.
Antwort von shipoffools:
The ATI Radeon All-in-wonder is normally connected s.diese card internal audio cable with the AUX input of the soundcard connected. When you install the All-in-wonder software will, inter alia the Toninitialisierungsassistent displayed, where you in the list of audio inputs "AUX" to select. If the audio output of the ATI card is external (ie, directly behind the outside s.der card) with the line input of sound card through a cable connected to, must, of course, from the list "line in" selected. You must therefore find out how (and whether) the All-in-wonder with the sound card is connected and then when you install the software. Without connection to the All-In-Wonder card with the sound card goes soundmäßig nothing else, if you have the sound on the ATI adapter plug einspeist. As should be synonymous with your PC documentation or the documentation of the ATI card Installation note to be included. I think the software that you do not need to reinstall, but you can make this Initialisierungsassistenten in the setup of the ATI TV software under "display" menu. Since it would have to fold.
If the correct input is selected then you need to be in the recording of your course synonymous in your capture program select.
Alternatively, the audio signal from the camcorder directly synonymous with the line-in input of the audio card, which is just as good. If synonymous, but a "real" line-in input to and not a Micro or a combined input Line-in/Micro-Input. If this is the case, the Micro-preamplifier is disabled, otherwise the signal is overdriven.
Greeting
shipoffools
Antwort von Katja01:
Thank you for the detailed answer.
I have Initialisierungsassistent in various ways, such as Aux and Line in testing, however, runs the sound still does not.
Bzgl. the other connection, what is a real line in? Something like, perhaps? http://www.alpinesoft.co.uk/VinylStudio/images/line_in.jpg
Many greetings
Katja
Antwort von shipoffools:
... what is a real line in? Something like, perhaps? http://www.alpinesoft.co.uk/VinylStudio/images/line_in.jpg
... Yes, this is a "real" line-in input. And so it
must work. If only a microphone as its input, you need, when you the speaker icon in the taskbar, clicked searched under "Options -> Properties" -> "Audio input" set. Then in the "Recording" window under "Advanced" to disable the microphone amplifier. Then it should be so synonymous as input function.
... and of course the signal should not be overridden, that is, the controller down beautifully drawn, if it "crashes".
Greeting
shipoffools
Antwort von Katja01:
I have the Line-in Recording - controller is very reduced, but the quality after the recording is still very bad, it turns over very often to the sound. Leg normal listening / viewing on the PC would be the video quality (picture + sound) actually ok for me.
Are such problems on my hardware or is there any tricks so I could improve what?
Even if I change the recording on Pinnacle Studio 9 Implementing and there is the best recording quality choose the result is not just exhilarating.
Thank you very much
Katja
Antwort von shipoffools:
I have the Line-in Recording - controller is very reduced, but the quality after the recording is still very bad, it turns over very often to the sound. ...
Are such problems on my hardware ...?
... The only possible sources of error that I have ideas:
- Is really the Line In fader of "Recording" reduced? ... and not the Line In fader volume control (synonymous "sum"), so only the interception or playback volume. (to change under Options -> Properties)
- If it is a combined Mic / Line input is: Is the mic preamp disabled?
- Any line-in jack broken?
When it comes to an "on-board sound card", there's anyway 'ne better solution, because they firmly installed on the mainboard cards usually do not suck:
Audio interface via USB or FireWire
Even the cheap versions still deliver a better sound than most "on-board low-cost tickets."
There's already p.30 euro, however, is to recommend something more to invest and make sure that at least RCA inputs are available.
eg BEHRINGER U-Control UCA 202 (approx. 30 Euro)
better: EDIROL UA-1EX (approx. 70 Euro)
For private purposes, for old videos digitizer should be completely sufficient.
But as with all devices is the quality / scale euro top wide open - depending on what you want to reach. "Broadcast" Sound is holding its price. o)
Antwort von Katja01:
Thank you for your reply.
Is really the Line In fader of "Recording" reduced? Yes, I've really done.
If it is a combined Mic / Line input is: Is the mic preamp disabled? I have one input for line-in and Mic. So / can I use the mic-preamp does not disable it? How would it work in principle? When the volume control for Mic when I take the precaution of recording quite pulled down.
When it comes to an "on-board sound card" is How can I check for?
Thank you very much
Katja
Antwort von JMS Productions:
When it comes to an "on-board sound card" is
How can I check for? If you have an onboard sound card, you are your Chinchaus and inputs directly on the motherboard installed and not in an extra sound card.
Show rear s.deinem PC: Are the Chinchanschlüsse very bottom, it is probably a PCI (e)-in sound card, not onboard. Connections Are more likely next up, it'll probably an onboard card. 100% certainty you will get when you open your PC and the motherboard you anschaust ...
PS: What about when you take a screenshot of all your volume settings do (double click Taskbar Lautsprecherymbol, tab HOST). Then vllt a lot clearer.
