Frage von RickyMartini:
For my HF100, I have the following wide-converter at a glance:
1. Canon WD-H37II (p.137 ¬)
2. SonyVCL-HG0737C (p.148 ¬)
3. Hama Digital HR Lens 0.5 x HTMC 37mm (approx. 56 ¬)
4. Raynox?
It is important to me that the Picture synonymous sharp to the edge and remains volldurchzoombar is.
When I SonyDCR-PC101E do I use the Sony model with 30mm threads and am with the best quality content.
Yesterday I tested the 30mm half s.meine WW HF100 held. It was the sharpness quite well, with a slight Randabschattung was observed. Therefore would require an adapter ring 30mm to 37mm is not in question - as a cheap interim solution - because it would reinforce the shadows.
Antwort von deti:
Take the Canon WD-H37II - many other adapter show significant weaknesses, if you want to look closely: Most are there color over the entire screen area and edge blurring can be observed (eg Raynox). Then there's still the problem that some adapter (eg of Hama) not over the entire focal length range that can be used, resulting in a constant top-down bolts and the adapter is forced.
The least I could when weaknesses Canon WD-H37II adapter, although a shorter focal length than the factor of 0.7 is possible. If that's not enough, should be on a different adapter dodge.
Deti
