Frage von dee:
Hello Forum,
I would like to configure a small workstation.
I'm still working with CS3 in the near future but would like to
a more recent version update. I usually cut HD footage 720
However, the Pc should be synonymous with AVCHD ready.
Of Pc's in general, I've really no idea. The components
I'm out of my other posts and herausgsucht many test reports.
The result:
Processor: Intel Core I7 870 = 240
Motherboard: Gigabyte GA-P55-UD4 = 140
Memory: 8GB Corsairt Kit (4x2) = 125
Hard drive: Samsung Spinpoint 1TB F3HD = 55
Graphics: NVIDIA GeForce GTX460 = 160
PSU: beQuiet! Pure Power 530W = 65
Case: Antec Three Hundred = 60
Case Fans: Cluster UCCLE 12 120mm (how often?) = 18
Socket Cooler: Scythe Mugen 2 Rev = 40
Drive: 904 Total exists Euronen
The hard drive is yet to be retrofitted. Either with a second SSD or a faster
Can you tell me whether this configuration good for something.
Have your improvement suggestions?
However, I would like to stay under 1000 ¬.
Thank you very much in advance!
Daniel
Antwort von tommyb:
The power supply might be insufficient or would be dimensioned somewhat scarce. But the power of the processor + graphics card under load could fix values of 300 to 350W. Do you want to use later on other hard disks, make overclocking and other things here could be the end.
Take one with 600W, which should be safer.
Otherwise: ok
Antwort von dee:
Thanks for the tip! It will later be added plates,
so I will follow your advice.
Now I'm in my decision a bit safer.
