Frage von qwer99:
Morning,
've just one question about understanding XLR adapters.
How is really gepegelt?
I have in my own camera controls and the peak synonymous.
Close I'm now the adapter, then sends this zb Pegelton from NEN, with whom I einpegel Camera and then the rest with the power level or how does this exactly? Where an adapter without peak / VU or should already have a display to have?
What Beachtek adapter except there are?
Thank you very much
MfG
Antwort von qwer99:
... or "add" the Level?
Antwort von rush:
moin,
So I send these adapters usually do not know Pegelton from.
If you now but since such a mixer (SQN, Wendt, etc.) can connect to this one pegelton rausgeben on you & your camera adapter and then firmly einpegelst not turn out but only on the mixer go ...
if your camera a sort of internal peak / vu meter has all you need is not such that a s.xlr with exta display adapters then yes but see the display of your camera where you stand with the level and can be regulated according to ... for safety of course always with headphones listen.
Antwort von HighDefinition:
Sers,
Thank you.
There is indeed a rule of thumb that you always control at 70% to be 0dB adjustment.
That means I do the best result if the XLR adapter to 70% is set and then I with the internal Auspegler Cam at the 0dB auspegel - correct?
Where exactly is the vulnerability, if a simple XLR jack adapter takes? There you can indeed connect a device and has the advantage of symmetrical shielding. On my Cam (VX2100), I can only CH1 +2 together and not separately auspegeln. Does this mean that I have with using an XLR adapter'm in a position, both tracks separately auszupegeln? But I would like to see the internal Microphone can run to safety. How does it work then?
Thank you very much!
Antwort von HighDefinition:
None of you white men expert advice?
Antwort von rush:
nabend,
So usually turns the microphone inerne cameras in this art independently s.wenn you have a microphone connected ...
With the adapters you have virtually the possibility to both tracks a different signal to give, but you can not use the internal microphone but really need 2 external sources one of which is then to track 1 and the other on the 2 is sent or already mixed on both channels.
