Frage von kali:
Work with Final Cut Pro 6 The material that I would like to log in 1080i 25p mode with the Sony HVR-z5e have been included. If I use the material according to the Log view, the picture by a horizontal line flickering disturbed.
The picture looks more like cut.
What could be the reason. Resolutiondes On the computer screen (1280x1024 on Resolutionist set to 75 Hz)? The recording mode? At the configuration?
I'm completely stumped and grateful for any hint!
kali
Antwort von Axel:
Classic. "HDV" in the recording, but for the sequence except HDV 1080 25p, which is the correct configuration. Read
here (do not worry, short thread).
Antwort von kali:
Thanks for the quick reply!
Unfortunately, have only vague asked: it is only a line across the entire width and at different heights wandering significantly disturbs the Picture. From and to the line disappears again synonymous. Have yet again changed the configuration. Does nothing. Build me a line with any logging will be stronger. But I am unsure.
Antwort von Axel:
Sounds bad. Try to> display> All images are the
Apple Cinema Desktop Preview (cmd + f12 program with active buttons). Vaguely recalls a wandering line s.einen Clear Scan shot without monitor or TV (due to beam wandering dubbed Picture / line frequency). Perhaps it was 2
4 p. As the "fake" 24p in a "fake" 25 timeline (the timeline is open for errors synonymous open) look, I can not tell you, do not have 24p, your camera can, however, synonymous as "E" model. Counter test: How will the footage in a 1080p24 - Timeline shows?
Antwort von WideScreen:
A screenshot would be helpful now. Sounds but Syncronproblem nem. 25 frames ... rotated in Germany? Or USA?
Emergency times of the 75 cardiac monitor switch? is based on the Camera display visible synonymous? If not, then there is what s.Calculator lazy.
75 heart frame rate? Uses you still ne tube? Otherwise it would be 60 Hz or? At least for the PC.
Antwort von Axel:
75 heart frame rate? Uses you still ne tube? Otherwise it would be 60 Hz or? At least for the PC. When Mac synonymous. 1280 x 1024 is 4:3, however, synonymous, but when I on my 16:10 monitor with the 75 Hz RESTRICT, will I be a shrink to Picture, but no stripes. Nothing, which indicates a "wrong" frequency signals. In my amateur idea would be 75 Hz at 25fps but no downside, apart from it. But the wrong frequency may also not be. 25p in a 24p timeline causes an inconspicuous light green render bar, which extends from the usual gray almost no difference. It is synonymous no warning about non-optimized media, even though I've enabled. When playing you can see at fast movements that one frame per second is omitted. Conversely, it would be a picture-doubling, and your complaint with wrong frequency would have been elected: Picture jerky.
Antwort von Quadruplex:
1280 x 1024 is 5:4 - 4:3 not
Antwort von Axel:
1280 x 1024 is 5:4 - 4:3 not * Shame *. How do you say? Religion 1, mental arithmetic 6 ... (; Should not a religious war-OT be continued!)
Antwort von WideScreen:
Good, then I skip the commentary relating to Relligion:)
Is it me synonymous not imagine that it is s.der refresh. Not really. But as I said, a screenshot would work wonders. Otherwise, I can not help next.
Antwort von kali:
Sounds bad. Try to> display> All images are the Apple Cinema Desktop Preview (cmd + f12 program with active buttons). Vaguely recalls a wandering line s.einen Clear Scan shot without monitor or TV (due to beam wandering dubbed Picture / line frequency). Perhaps it was 2 4 p. As the "fake" 24p in a "fake" 25 timeline (the timeline is open for errors synonymous open) look, I can not tell you, do not have 24p, your camera can, however, synonymous as "E" model. Counter test: How will the footage in a 1080p24 - Timeline shows? It works! Thank you for this advice
Could it unfortunately now only try. With the configuration 1080p24, I get the material without disturbing stripes.
What I would still like to understand why the camera is on display 1080i 25p when obviously been in 1080p24?
Thanks Again, I'm very glad this disturbing stripes going to have.
Antwort von kali:
Ps: Thanks of course synonymous s.alle answer other donors.
Even changing the framerate to 60 Hz was a resounding success.
Antwort von kali:
The flickering line is back. can not therefore be receptive s.der are synonymous not s.den settings of the screen. have not changed and the line comes and goes without that I know why.
what could be the reason. what can I even try? movement at the line more clearly. it can s.aufnahmeprofil PP6 film look than 2. which was probably set during recording. but why is the line at that time not. s.computer may lie? and if so how can one check.
'm totally clueless
Thank you
kali
